iso viscosity improver dissolving system

Brand Name:Beijing VP

Model Number:Customized according to demand

Place of Origin:Beijing, China

...Viscosity Improver - Dissolving System - BJVP Overview: This equipment is designed for the production of lubricant viscosity improver. VP High shear VI dissolving system includes: VI Dissolving Tank (with the function of heating, agitating, temperature control, high liquid level protection, etc.), Dissolving...

Brand Name:DR

Model Number:DR-A

Place of Origin:Made in China

... in organic solvent like toluene. CEVA Specification Appearance Yellow lump solid Chlorine content 24-28% Viscosity 300-440mPa.s PH 4-7 Application 1. Chlorinated EVA is used as Major resin of the printing ink for intaglio printing with BOPP-film 2.

Brand Name:Biaobang

Model Number:VA10118

Place of Origin:Guangzhou, China

...ISO And CE Certified Quality Standards FEATURES: This advanced cleaning solution is specially formulated to break down and dissolve tough buildups like sludge, varnish, gum, and carbon deposits that often accumulate inside carburetors over time. It deeply penetrates internal surfaces to clear away stubborn residues and impurities. By thoroughly cleaning the passages and nozzles, it restores smooth fuel flow, improves...

Brand Name:CHONGYANG

Model Number:CY-RO-10000L/H

Place of Origin:China

... and other impurities from the water. The chemical treatment can enhance the performance of the RO process by reducing fouling and scaling on the membrane surface, which can improve the overall efficiency of the system. The Partial Product Specification:

Brand Name:WeiLi Resin®

Model Number:WL-1969

Place of Origin:China

... matter 72±2% Viscosity(35℃) 4000-10000mpa.s PH If not neutralized, add more than 6% triethylamine to neutralize and then dissolve in water. Performance 1.It does not contain benzene, dries quickly, has fast hardness improvement, has fast amino cross...

Brand Name:Covestro

Model Number:T65 XF

...improved flow compared with T65 Rheological properties Eigenschaft Prüfbedingung Einheit Norm typischer Wert C Melt volume-flow rate 260℃/5kg cm³/10 min ISO 1133 18 Melt viscosity 1000 s-1/ 260 °C Pa.s b.o. ISO 11443-A 200 Molding shrinkage, parallel 150x105x3 mm/ 260 °C / MT 80 °C % b.o. ISO 2577 0.5-0.7 Molding shrinkage, normal 150x105x3 mm/ 260 °C / MT 80 °C % b.o. ISO

Brand Name:SKYHIL

Model Number:QX-C06-1

Place of Origin:China

... and stabilizers in waterborne system. 3. It improves rheological property of the paint. 4. S type is dissolvable in cold water after being dispersed for 20-40 minutes and then it becomes transparent viscosity dense liquid. 5. If takes 2-5 minutes

Brand Name:Direction Chemical

Model Number:DY2061

Place of Origin:China

... Temperature ASTM D-3418 ºC 32 Molecular Weight ASTM D-3593 g/mol 50,000 Inherent Viscosity ASTM D-2857 / 0.23 Acid Value ISO-3682 mg KOH/g ≤6.5 Moisture Content ISO-3251 % ≤0.5 Ⅲ. Applications: Used in UV ink of OPP film to improve flexibility,

Brand Name:TR Solids Control

Model Number:TRSL100

Place of Origin:Xi'an,China

... is a directly injected mixer of the additive material of drilling fluid. It is mainly used to mix drilling fluid and additives quickly and uniformly to improve drilling fluid's performance. It also can have shearing and hydration system