Dual channel counting loop detector for parking system vehicle counting

Product Description:​​

JUTAI Dual Channel Counting Loop Detector is an advanced inductive vehicle sensor designed for accurate vehicle counting in parking systems and access control applications. This loop sensor reliably detects vehicles passing over embedded road loops, making it an essential component for automated vehicle counting, barrier gate control, and traffic management systems.

​Applications:​​

This dual-channel loop detector is widely used in various vehicle detection and counting scenarios, including but not limited to:

• ​Parking Systems:​​ For entrance/exit vehicle counting, occupancy management, and automated barrier gate control

• ​Parking Lots & Garages:​​ To count vehicles entering and exiting, manage available spaces, and control access

• ​Toll Booths & Toll Plazas:​​ For vehicle counting and toll lane vehicle presence detection

• ​Traffic Management Systems:​​ To monitor vehicle flow, count traffic volume, and optimize signal timing

• ​Gated Communities & Residential Complexes:​​ For vehicle access control and resident vehicle counting

• ​Commercial Buildings & Office Parks:​​ To track vehicle entries for security and facility management

• ​Airports & Transportation Hubs:​​ For vehicle counting at drop-off zones, parking entrances, and logistics areas

• ​Industrial Facilities & Warehouses:​​ To monitor vehicle movement for security and operational efficiency

• ​Event Venues & Stadiums:​​ For counting vehicles entering parking areas during events

• ​Road Traffic & Highway Systems:​​ For vehicle presence detection and traffic data collection

• ​Bus Terminals & Transit Stations:​​ To count shuttle and service vehicles

• ​Fleet Management & Logistics Centers:​​ For tracking vehicle movements in and out of depots

• ​Smart City Infrastructure:​​ As part of intelligent transportation systems for real-time vehicle monitoring

​Key Features:​​

• Dual-channel vehicle loop detection (CH1 and CH2)

• High sensitivity to detect various vehicle types including trucks and trailers

• Adjustable sensitivity and frequency via DIP switches

• Multiple detection modes including presence, pulse, and direction detection

• Relay output for integration with barrier gates, counters, and access systems

• Visual LED indicators for power and detection status

• Easy installation with standard inductive loop wiring

• Reliable performance for outdoor and high-traffic environments

​Technical Specifications:​​

This dual-channel loop detector is the ideal solution for any system requiring accurate vehicle counting, presence detection, or automated access control—especially in parking environments where counting vehicles is essential for operational efficiency and security.

Connections

Indicators and Switches:

• Power LED (RED): Illuminates to indicate "Power ON."
• CH1 Detection LED:
  • Steady On: Indicates vehicle detection.
  • Slow Blinking: Indicates a loop short circuit or insufficient twists after the loop.
  • Fast Blinking: Indicates a loop open circuit or excessive twists after the loop.
• CH2 Detection LED:
  • Steady On: Indicates vehicle detection.
  • Slow Blinking: Indicates a loop short circuit or insufficient twists after the loop.
  • Fast Blinking: Indicates a loop open circuit or excessive twists after the loop.

Sensitivity Selection:

• Sensitivity and frequency adjustment is facilitated through a 7-way dip switch and 10-way dip switch settings.
• Users can choose from 8 different sensitivity settings by configuring the dip switch positions according to the provided tables.
• Dip switches 6, 7, and 8 govern CH1 sensitivity, ranging from 0.8 (least sensitive) to 0.015 (most sensitive).
• Dip switches 3, 4, and 5 control CH2 sensitivity, ranging from 0.8 (least sensitive) to 0.015 (most sensitive).

3. Switch 1=S1 : Channel 1 Loop Function Selection (10 way dip switch)

(1)(Switch 1) DIP 1 & DIP 2 Special Sensitivity Increase For Both Trailer (Both Channels).

(2)(Switch 1=S1) D3, D4, D5 and (Switch 2=S2) D1, D2 Setting Special Functions (Mode1, 2, 3 Direction Detection. Mode 4, 5, 6 Normal mode, two loop detection are separated)

(3)(Switch 1=S1) D6 & D7 & D8 and (Switch 2=S2) D3 & D4 & D5 Setting CH1 and CH2 Sensitivity Selection (Eight Levels Choices).

(4)(Switch 1=S1) D9 & D10 and (Switch2=S2) D6, D7 Setting Frequency (20 K to 100 KHz).

* Reset Button : Please note : The LD-200 must be reset every time a setting change is made to the Dip switches.

Installation Precautions and Troubleshooting:

1. Coil Cutting Size and Embedding Guidelines are as shown in the diagram on the right.
2. It is recommended to use ferromagnetic wires for the induction coil, with a total length of up to 500 meters.
3. The cutting size of the coil should be a rectangle with a length of 1.0 to 2.0 meters and a width of 0.8 to 1.2 meters, avoiding right angles at corners as much as possible.
4. Recommended installation overview of basic typical coil turns:

When installation, please keep the product plug and socket in the vertical direction

Application

The JUTAI LD200/202 double-channel vehicle loop detector series, equipped with direction recognition function, is ideal for numerous single-channel entry and exit scenarios. When integrated with the JUTAI One door controller (Model: AC-11), JUTAI gate barrier (Model: BR-110), and JUTAI long-range RFID reader (Model: PUHF-9), along with high-temperature resistance loop coils (Model: JTHT-11), it forms a seamless solution for single-channel entry/exit access control systems.

The working principle is as follows:

1. Entry Process:

   • When a car enters the community or parking lot, the two loop coils are pressed simultaneously.
   • The JUTAI Double Channel Loop Detector (LD-200/202) triggers the UHF reader located at the entrance.
   • The UHF reader reads the card ID and sends it to the controller (AC-11) via Wiegand output.
   • The controller verifies the ID's validity and outputs a relay signal to open the gate barrier.
   • The car enters the community or parking lot, and as it passes the barrier gate, the barrier arm lowers automatically.
   • The JUTAI Single Channel Loop Detector (LD-100/102) ensures safety and anti-smashing functionality during this process.

2. Exit Process:

   • When a car exits the community or parking lot, it passes by an inside UHF reader.
   • The LD-200/LD-202 triggers the UHF reader, which reads the card and sends the ID to the controller.
   • The controller verifies the ID's validity and outputs a relay signal to open the gate barrier for the car to exit.
   • As the car passes through the barrier gate, the barrier arm lowers automatically.
   • The LD-100/102 provides safety and anti-smashing functionality during this process.

3. Direction Recognition:

   • The Direction Recognition Function of LD-200/LD-202 ensures that the double channels loop detector does not trigger the signal again when the car passes another UHF reader, thereby recording only the entry or exit records in the system.

The JUTAI LD-200/202 Double Channel Loop Detector can also function as two independent single-channel loop detectors. This configuration is suitable for standard one-in and one-out parking lots, where there is one barrier and one long-range reader at both the entrance and exit.

In this setup, one loop coil is used to trigger the reader and read the card, while the other loop coil is dedicated to the barrier's anti-smashing function. By utilizing the LD-200/202 as two independent loop detectors, there is a potential cost-saving benefit from an economic standpoint. This setup reduces some of the hardware costs associated with using separate detectors for each function.

This functionality is achieved by enabling the Independent Working Mode feature of the LD-200/202, allowing it to operate effectively in this dual capacity.