Tools Packaging

Brand Name:GPDC

Model Number:CAT40/CAT50

Place of Origin:China

·Sampling tensile testing for each batch of products to ensure product safety ·Adopt advanced quenching equipment and processes to ensure consistent hardness, reduce internal residual stress and improve durability of rivets ·Sampling tensile testing for ...

Brand Name:GPDC

Model Number:BT40-SK16-90

Place of Origin:China

High quality handle for collet chuck BT40-SK16-90 China Manufacturing Hardness: HRC56°-58° Accuracy: <5μ Material: Carburized alloy steel Features: High precision,high speed, high strength Standard balance : G6.310000rpm Dynamic balance: G2.525000rpm In ...

Brand Name:AUTOFOR

Model Number:255/205/185/155*1.0/0.7/0.8/0.5*32/25.4

Place of Origin:China

Cutting Wheel For Aluminum Tube,TYPE-C Interface Of Mobile Phone,Automobile Engine Cooling Water Pipe,Car Exhaust Pipe. All kinds of pipe precision cutting wheel series: cutting port bright, smooth, no burr, no secondary grinding; Aluminum Tube TYPE-C ...

Brand Name:AUTOFOR

Model Number:JX602-255

Place of Origin:China

●JX602-255 cutting machine JX602-255 cutting machine is a small high-precision, high-efficiency cutting device, which is suitable for metallographic specimen cutting of various metal and non-metal materials. JX602-255 cutting machine is easy to use, safe...

Brand Name:AUTOFOR

Model Number:LS180

Place of Origin:China

Control Cables Cutting Discs , Resin Cutting Disc Wear Resistance AUTOFOR specializes in cutting cable (brake line / flexible shaft / soft wire) for more than ten years. It is a well-known supplier of high-end cable (brake line / flexible shaft / soft wire...

Brand Name:GPDC

Model Number:BT40-ER32-100

Place of Origin:China

Drilling Chuck Center Accessories Tool Holder BT40-ER32-100 The whole through hole is good for water and earthquake resistance. • When loading, the collet must be placed in the nut, then the tool is loaded, and then locked into the body. ·Be sure to use...

Place of Origin:China

Brand Name:MIROC

Model Number:H25

H25 Dia.35mm-57mm For Mining Thread Button Drill Bit Description H25 Thread System affords drillers the ability to change drilling bits whilst still using the same drilling rod for small hole drilling. Button bits are cost-effective on medium to hard rock ...

Place of Origin:China

Brand Name:MIROC

Model Number:4148300404-4148300409

Description Drill rod using R25 thread system. With R32 on one shank end. Suited for short hole drilling operations. • R25 thread system • Suitable for small hole range Color: Based on Customer requirements Material: Tungsten carbide and high strength ...

Place of Origin:China

Brand Name:MIROC

Model Number:4148301629-4148301635

Down The Hole Water Well Drill Shank DTH Hammers Description In DTH hammers, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little energy is lost...

Place of Origin:China

Brand Name:MIROC

Model Number:4148301645-4148301655

OEM Middle Pressure Tungsten Carbide Drill Bit Dia 130-230mm Description In DTH drilling, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little ...

Place of Origin:China

Brand Name:MIROC

Model Number:4148301656-4148301663

Industrial Alloy Steel DTH Drill Bits Water Well Drilling Bit Description In DTH drilling, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little ...

Brand Name:MIROC

Model Number:DTH Button Bit

Place of Origin:China

CIR80 CIR90 Low Air Pressure DTH Button Bits With Diameter 80mm 90mm 95mm In DTH drilling, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little ...

Brand Name:MIROC

Model Number:RC DTH Hammers

Place of Origin:Shangdong,China

5" RE547 Reverse Circulation Down The Hole Drilling ToolsDTH Hammer And Bit RC series reverse circulation DTH Hammer ,optimization of inner structure offers faster drilling speed and more stable operatio. It is mainly used for deep exploration drilling...

Brand Name:MIROC

Model Number:R25 R32 R38 T38 T45 T51

Place of Origin:Shangdong,China

R25 R32 R38 T38 T45 T51 Thread Drill Rods For Underground Mining Drilling Tools Describtion Our factory can offer many kinds of drill bits, including chisel type bits, cross type bits, tapered drill rods and integral drill rods, mainly used for mining, ...

Brand Name:MIROC

Model Number:DTH Hammer

Place of Origin:China

5.0'' QL DHD COP Series DTH Hammers / down the hole hammers In DTH hammers, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little energy is lost...

Brand Name:MIROC

Model Number:DTH Button Bit

Place of Origin:China

CIR Series Low Air Pressure DTH Drill Bits CIR65 CIR70 CIR80 CIR90 CIR110 CIR150 ​We can design and manufacture the personalized products to meet your specical apllication, such as changing the tungsten carbide insert profile (spherical, ballistic, etc.), ...

Brand Name:MIROC

Model Number:IADC Code F4446 / M432

Place of Origin:China

PDC Drill Bit for IADC Code F4446 / M432​ with Power of Counterpoise Design Description: • Short parabola crown profile • Ø13 cutters • Power of counterpoise design • Reparable nozzles & immobility nozzles • Gage of smooth design • Suitable for formation ...

Brand Name:MIROC

Model Number:10 5/8"(270mm)

Place of Origin:Hebei, China (Mainland)

10 5/8"(270mm) Deris 6 blades PDC drill bit/PDC bit with steel body for well Diamond PDC Bit for Well: 1) Bit profile is optimized and is suitable for drilling soft to medium formations. 2) Cutting structure is force balanced, bit blade is asymmetrically ...

Brand Name:MIROC

Model Number:Threaded Drill Rod

Place of Origin:Shangdong,China

Steel Threaded Extension Rod R28 R32 R38 T38 T45 T51 , Quarrying Mining Drill Product Description Basic Information Product Name Threaded Drill Rod Thread T45 Diameter 46 Length 12FT / 3660mm Drill Rod Type Extension rod Material High strength alloy steel ...

Brand Name:MIROC

Model Number:RC Bits

Place of Origin:Shangdong,China

High grade tungsten carbide inserts DTH Tools RC-E545 Bits and Hammers For Mining Well Drilling In DTH drilling, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact wit...