Scarf, Hat & Glove Sets

Brand Name:Pego Tester

Model Number:PG-IPX12C

Place of Origin:China

IEC60529 Box Type Waterproof Environment Test Equipment for IPX1 and IPX2 Testing Introduction: IPX1-2 Drip Box is designed according to IEC60529 clause 14.2.1 and 14.2.2. It is applied to simulate the conditions of vertically dripping and dripping with 15...

Brand Name:Pego Tester

Model Number:PG-SH

Place of Origin:China

Adjustable Spring Impact Hammer for IK02 to IK06 Testing According to IEC60068-2-75 1. Introduction: The spring hammer test apparatus is completed designed according to IEC60068-2-75 figure E.1, the universal spring hammer is adjustable to perform IK01 (0....

Brand Name:PEGO

Model Number:PG-TPC

Place of Origin:China

IEC61032 Test Finger Probe Test Probe C Test Rod for IP3X Testing 1. Introduction of Test Probe C: Designed according to IC61032 figure 3, meet the requirements of IEC60529-IP3, IEC60065,IEC60598 and etc. This rod is intended to verify the protection of ...

Brand Name:PEGO

Model Number:RK5003

Place of Origin:China

High Quality 4KV / 5KV AC Power Supply Voltage and Frequency Adjustable Introduction RK5001 AC power supply is based on the microprocessor and is fabricated by MPWM. It is designed with active component IGBT module. It adopts digital frequency division...

Brand Name:PEGO

Model Number:B22

Place of Origin:China

IEC60061 - 3 Gauges for Lamp Cap B22 Lamp Cap Gauge 7006 -10, 7006 - 11, 7006 - 4A “Not Go” Gauge for B22 Caps on Finished Lamps (7006-10-8) Purpose: to check dimension A min. of caps B22 on finished lamps. Testing: caps on finished lamps shall be assured...

Brand Name:PEGO

Model Number:G5

Place of Origin:China

IEC60061 - 3 G5 lamp Cap Gauge Go Not Go Gauge 7006 - 46A and 7006 -46 with CANS Certificate Go Gauge for Bi-pin Cap on Finished Lamps G5 (7006-46A-3) The G5 go gauge is designed according to IEC60061-3 standard figure 7006-46A-3, it's made of stainless ...

Brand Name:Pego Group

Model Number:LSG-255

Place of Origin:China

IEC60225-5 IEC60335-1 Impulse Voltage Generator 1.2/50us Waveform 500Ω Impedance 1. Introduction: The impulse voltage generator (high voltage surge generator) is in line with the requirements of IEC60225-5, IEC60060, IEC60590, IEC60335-1,GB14711 and etc....

Brand Name:PEGO

Model Number:PG-TP11

Place of Origin:China

Unjointed Finger Probe Meets The Requirements of IEC61032 Standard Figure 7 1. Introduction: This Unjointed Finger Probe is made for forceful insertion where the flexibility of the Jointed Finger Probe would be difficult. The Unjointed Finger Probe meets ...

Brand Name:PEGO

Model Number:PG-STP

Place of Origin:China

IEC60335 Surface Temperature Probe with 4N Force for Satety Testing 1. Standard of Surface Temperature Probe: IEC60335 2.Application of Surface Temperature Probe: The surface temperature probe is designed according to the requirements of the IEC60335 ...

Brand Name:PEGO GROUP

Model Number:IP56X

Place of Origin:China

PLC Control IP5X and IP6X Dust Ingress Protection Test Equipment for Auto Parts 1. Introduction The sand and dust test chamber helps to evaluate the ability of the equipment to withstand the effects of dust, it is apply to test various auto parts includes ...

Brand Name:PEGO GROUP

Model Number:PG-GNG

Place of Origin:China

IEC60061-3 Lamp Cap Go and Not Go Gauges E40, E39, E12, GX53 with Calibration Certificates 1. Introduction Lamp Cap Go Not Go Gauges are designed according to IEC 60061-3, which specifies the form, dimensions, purpose of use and inspection of gauges for ...

Brand Name:PEGO GROUP

Model Number:IK-PD10

Place of Origin:China

1. Introduction The IK mechanical impact test apparatus is designed according to IEC60068-2-75 Test Ehc and IEC62262 (equivalent EN62262), and can meet the test requirements of IEC60598, EN50102. The IK Code was originally defined in European Standard BS ...

Brand Name:PEGO Electronics

Model Number:PG-TB31

Place of Origin:China

IEC60068-2-31 Repeated Free Fall 500mm /1000mm Rotating Barrel for Mechanical Strength Test 1. Introduction The rotating barrel also called as tumbling barrel is designed according to IEC60068-2-31clause 5.3/figure A.1, IEC60598-1 clause 4.13.5, IEC60884...

Brand Name:Pego

Model Number:PG-IPX12C

Place of Origin:China

IEC60529 Ingress Protection Testing Machine for IPX1 and IPX2 Vertical Drip Test 1. Introduction The IPX1 and IPX2 Ingress Protection Testing Machine is designed and manufactured according to IEC60529, IEC60598-1, GB4208, and GB7000.1 standards. It is ...

Brand Name:PEGO Electronics

Model Number:PG-IPX7

Place of Origin:China

IEC60529 Clause 14.2.7 IPX7 Water Tank Ingress Protection Testing Machine 1. Introduction The IPX7 Water Tank Ingress Protection Testing Machine is designed and manufactured according to IEC60529 clause 14.2.7 and IEC60598-1, and is suitable for waterproof...

Brand Name:Pego Electronics

Model Number:PG-USH

Place of Origin:China

IEC60068-2-75 Annex E Clause 6 Test Ehb Figure E.1 Spring Operated Hammer 1. Introduction The spring operated hammer is designed and manufactured according to the requirements of IEC60068-2-75 and GB/T2423.55, clause 4.13.1 of IEC60598-1, clause 21.1 of ...

Brand Name:Pego Electronics

Model Number:PG-CSV

Place of Origin:China

Low Carbon Steel Vessels for Induction Hotplates to Perform Normal Operation Test IEC60335-2-6 1. Introduction The low carbon steel vessels is to simulate the cooking appliances to perform the normal operation test to induction hotplates. The vessels is ...

Brand Name:JUHUA

Place of Origin:CHINA

Oven Wire Rack For Roasting Vegetables – Stainless Steel Baking Rack For Crispy Food Description Our premium series of Oven Racks and Wire Shelving Components are engineered specifically for heavy-duty residential and commercial cooking appliances, ...

Model Number:DX51D

Place of Origin:CHINA

Brand Name:JUHUA

Custom Length DX51D Galvanized Steel Plate For Appliance Enclosure Description Our premium DX51D (DX51D+Z) hot-dipped galvanized steel coils, sheets, and strips offer exceptional corrosion resistance, uniform zinc coating, and reliable formability for ...

Model Number:SS304

Place of Origin:CHINA

Brand Name:JUHUA

430 Grade Stainless Steel Coil Ferritic Steel Coil Providing Enhanced Heat Resistance And Corrosion Protection For Home Appliance Description Our premium 430 stainless steel coils, sheets, and strips offer a highly cost-effective and corrosion-resistant ...