Pressure Transmitters

Brand Name:kingpo

Model Number:CS9975-SIW

Place of Origin:china

Use 5.6 inch TFT (640*480) to display the setting parameters and test parameters, and the display content is eye-catching and rich;  The tester can store the test results in the format of EXCEL table in U;  Software can be upgraded through U disk;  ...

Brand Name:kingpo

Model Number:C5010

Place of Origin:china

EC 62153-4-6,LV 215-2Test system for shielding effectiveness of electric vehicle cable by three coaxial injection method Two methods to detect the shielding performance of the coaxial cable In the signal transmission, Unshielded cables Compared to shielded...

Brand Name:kingpo

Place of Origin:china

Product Description. The air exchange aging test chamber is suitable for the heat resistance test of electrical insulation materials, the air exchange aging test of electronic parts and plasticized products. Product features: 1. Temperature controller ...

Brand Name:kingpo

Place of Origin:china

Product introduction: CCT composite cycle corrosion test chamber can be traditional salt spray, dry and wet alternating mixed salt spray test and most of the automotive cycle corrosion test. Specifically for the specification requirements will be salt ...

Brand Name:Kingpo

Model Number:ISO5356-figure A.1

Place of Origin:china

ISO 5356-1 Anesthetic and Respiratory Equipment – Conical Connectors – Part 1: Cones and Sockets ISO 5356-1 Introduction In clinical practice, several breathing attachments used in anaesthetic and respiratory equipment may have to be joined together to ...

Brand Name:kingpo

Model Number:CS9975-SIW

Place of Origin:china

Use 5.6 inch TFT (640*480) to display the setting parameters and test parameters, and the display content is eye-catching and rich;  The tester can store the test results in the format of EXCEL table in U;  Software can be upgraded through U disk;  ...

Brand Name:Kingpo

Model Number:IEC60601-1-Figure 33

Place of Origin:china

Body Upper-Carriage Module-IEC60601-1-Figure 33 , IEC60601-clause 9.8.3.3 loading tester 9.8.3.3 * Dynamic forces due to loading from persons Where dynamic forces (due to sitting down, standing up, PATIENT handling PROCESS or the like) can be exerted on ...

Brand Name:kingpo

Model Number:KP-FM302

Place of Origin:china

FMVSS 302 / UN ECE R118 (rev. 2) Annex 6 Horizontal Burning Tester Product introduction The instrument consists of two parts: the control box and the combustion box. The sample is clamped flat by the clamp and placed on the bracket of the combustion box...

Brand Name:kingpo

Model Number:K6116

Place of Origin:china

1, Compliance: This combustion cabinet is produced in strict accordance with IEC60332 ul1581 sect 1080.1 ~ 1080.14 and fully complies with VW-1 (vertical specimen) flame test combustion test. It is applicable to VW-1 of ul1581, UL13, ul444 and ul1655 and ...

Brand Name:kingpo

Model Number:IEC 60598-1 Annex K

Place of Origin:china

IEC 60598-1 Annex K Temperature measurement- Double-walled cylinder Conform to IEC 60598-1 Annex K.1 The average ambient temperature in the draught-proof enclosure is taken to be the air temperature at a position near one of the perforated walls on a level...

Brand Name:kingpo

Place of Origin:china

Model Number:IP-IK1000

IEC 62262 IK Pendulum hammer,IK Rating Test, Pendulum Impact Hammer 1.IK Testing for LED luminaires 2.IEC 62262:2002 3.IK code IK01-IK10 4.To test degree 1.Introduction: The European standard EN 62262 - the equivalent of international standard IEC 62262:...

Brand Name:kingpo

Model Number:KP-GC012

Place of Origin:china

AS/NZS 3112 ABRASION TEST APPARATUS FOR INSULATION ON INSULATED PIN PLUGS Standard: IEC 60884-1- figure 28, BS1363-1 figure 9, EN50075, AS/NZ3112 Application: This device is use for test the abrasion resistance strength of insulation sleeve of plug pins ...

Brand Name:kingpo

Model Number:KP-CZL15

Place of Origin:china

IEC 60884-1-figure 30 Example of test arrangement to verify the fixation of pins in the body of the plug Product details: This device conforms to the standard of IEC 60884-1 Fig30. It is used for testing the firmness of the plug and the plug pin. The plug...

Brand Name:kingpo

Model Number:LX-D

Place of Origin:china

Shore Hardness' gauge IEC 60335-2-80-clause.20.101 20.101 Fan blades, other than those of fans for mounting at high level, shall be guarded unless their leading edges and tips are rounded and – they have a hardness less than D 60 Shore Shore Hardness&#...

Brand Name:kingpo

Model Number:KP-1680S-Test2

Place of Origin:china

KP-1680S-Test2 Implantable Surge Tester for Medical Device Testing Product Attributes Attribute Value Rise Time 1.5ms ≤ tp ≤ 2.5ms Optional USB TestMinder Computer control with auto-trigger via USB Warranty One year Product Name Implantable Surge Tester ...

Brand Name:kingpo

Model Number:KP-1050S

Place of Origin:china

KP-1050S Defibrillation Test Pulse Generator for Medical Device Safety Product Overview The KP-1050S defibrillation test pulse generator evaluates active implantable medical devices' response to defibrillation waveforms, assessing permanent effects, ...

Brand Name:Kingpo

Model Number:KP-1950U

Place of Origin:China

KP-1950U Discharge IC Tester for IEC62368-1 GB4943.1 Compliance Product Attributes Standards IEC62368-1:2018, GB4943.1-2022 Product Description The KP-1950U Discharge IC Tester is a precision instrument designed for electrical safety testing, capable of ...

Brand Name:kingpo

Model Number:KP-TP61A

Place of Origin:china

IEC 60601-1-Test Rod According to IEC 60601-1-clause 8.4.2 Diameter: 4.0(-0.05~+0)mm Length: 100(-0~+0.5)mm TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING IEC 60601-1:2005 + Am.1:2012 Medical electrical equipment - Part 1: General requirements for ...

Brand Name:KINGPO

Six-Axis Stamping Robot Product details BRTIRUS1510A is a six-axis robot developed by BORUNTE ROBOT Co.,Ltd. for complex applications with multiple degrees of freedom. The maximum load is 10KG, the maximum arm length is 1500mm. Lightweight arm design, ...

Brand Name:Kingpo

Place of Origin:China

Energy Saving Feedback Type Energy Storage Battery Performance Test Equipment Overview The Energy Storage Battery Performance Test Equipment is designed for comprehensive evaluation of various energy storage systems, including mobile, home, industrial, and...