Laboratory Clamp

Brand Name:kingpo

Model Number:IEC62368-1-Figure V.3

Place of Origin:china

IEC 60950 Figure 2C / IEC62368-1 Figure V.3 Blunt Probe Testing the Limited Access to Telecommunications Voltages The Blunt probe is required in IEC62368,IEC 60950,IEC 60065, UL and CSA Standards. It is used to check the limited access to ...

Brand Name:kingpo

Place of Origin:china

Product Introduction: This machine is suitable for examining the moisture resistance of electrical and electronic products, components, parts and materials under different temperature and humidity conditions, and can also be used as an adaptability test...

Brand Name:kingpo

Model Number:KP-1210

Place of Origin:china

Zr-1210model respirator resistance detector Product introduction Zr-1210 respirator resistance tester is used to measure the inspiratory and expiratory resistance of the mask under specified conditions.It is applicable to the inspection and inspection of ...

Brand Name:Kingpo

Model Number:ISO14457-figure 3

Place of Origin:china

ISO 14457 Dentistry — Handpieces and motors , ISO 14457 -Figure 3 Five types of test mandrel Test mandrel The test mandrel shall have the dimensions shown in Figure 3. The shape of the shank end for all types of test mandrels shall be either conical or ...

Model Number:ECG101

Brand Name:kingpo

Place of Origin:china

ANSI/AAMI EC12:2000(R2005) Disposable ECG Electrode Performance Tester Notes This instrument uses AC 220V /50H z, to prevent failure or damage, use the tester within the specified voltage range. To ensure safety, ensure that the ground wire in the ...

Brand Name:kingpo

Model Number:KP-1060

Place of Origin:china

Capacitor Discharge Tester Description For IEC Testing of residual voltage after plug disconnect. The KP-1060 disconnects the line at the voltage peak and analyzes results to the requirements of various Standards, allowing quick results. Scope output for ...

Brand Name:kingpo

Model Number:KP-FT06

Place of Origin:china

1, Description This apparatus determines the non-combustibility performance, under specific conditions, of homogeneous products and substantial components of non homogeneous building products. The specimen is subjected to temperatures of 750°C in a ...

Brand Name:kingpo

Place of Origin:china

Fluorescent Axial Force Tester Product Info: The test lamp holder should meet requirement of IEC60061-3 datasheet: Fluorescent with lamp hplder in place bear a pressure force in its axial direction applying to center of the lamp cap with 1minute -------G5 ...

Brand Name:kingpo

Model Number:BS1363-2:1995 figure 20

Place of Origin:china

BS1363-2:1995 figure 20 | Tumbling barrel Product details: This tester conforms to the standard requirement of VDE0620 ,IEC68-2-32,BS1363.1,EN50075,UL60730. it is used to check the drop resistance of electrical accessories. The falling times can be preset...

Brand Name:kingpo

Place of Origin:china

IEC60884clause 12.14 testing equipment of Lateral Strain for socket-outlets with 5N weight​ Standard: IEC 60884-1 2013 clause 13.14 figure 13 Application: This device is use to check whether any damage to the socket-outlets ratings up to 16A and 250V whe...

Brand Name:kingpo

Place of Origin:china

SN441011-2-3:2019-Lehre C2 Swiss Plug Gauge

Brand Name:KingPo

Place of Origin:China

Product Description: Our Electrical Safety Test Equipment is an essential tool for ensuring the safety and quality of electrical products. This product falls under the category of Electrical Safety Test Equipment and is designed to perform Blankets ...

Brand Name:Kingpo

Model Number:IEC 61010-2-012-Figure 103

Place of Origin:china

Scratching TooL ,IEC 61010-2-012-Figure 103 Scratching TooL Model KP-ST10 According to IEC 61010-2-012-Figure 103 Material Hard-soldered carbide tip K10 Surface roughness 1.6μm Details of scratching TooL tip Figure 103

Brand Name:kingpo

Model Number:IEC 60601-1-Figure 34

Place of Origin:china

11 .2.2 M E EQUIPMENT and ME SYSTEMS used in conjunction with OXYGEN RICH ENVIRONMENT 11 .2.2.1 RISK of fire in an OXYGEN RICH ENVIRONMENT In ME EQUIPMENT and ME SYSTEMS , the RISK of fire in an OXYGEN RICH ENVIRONMENT shall be reduced as far as possible...

Brand Name:kingpo

Place of Origin:china

Product Description: The IEC62368 Test Equipment is a versatile and reliable instrument designed for conducting comprehensive inspections and performance tests in accordance with the IEC 62368 standard. This state-of-the-art equipment boasts a compact size...

Brand Name:KINGPO

Model Number:RDL21520

Place of Origin:CHINA

8K Signal Generator Attribute Value Accuracy ±0.5% Operating Voltage AC220V ± 10% 50HZ Standard Signal Source for Display Energy Efficiency Test Product Overview The 8K signal generator is a specialized video signal source designed specifically for display...

Brand Name:kingpo

Model Number:S2140A

Place of Origin:china

UL507-Figure 8.2 Probe For Fan Impellers And Other Moving Parts Of Stationary Fans UL507-figure 8.2 Probe for fan impellers and other moving parts of stationary fans and fans intended to be permanently connected electrically Parameter: 1,Probe Length:106mm...

Brand Name:KINGPO

Grinding Robot Product details BRTIRUS1820A is a six-axis robot developed by BORUNTE ROBOT Co.,Ltd for complex applications with multiple degrees of freedom. The maximum load is 20KG, the maximum arm length is 1850mm. Lightweight arm design, compact and ...

Brand Name:KingPo

Model Number:KP-1802

Place of Origin:China

KP-1802 Self Ballasted Lamp Load Cabinet for Load Switching Capacity Test Product Information Sample and restrictions: Switches for controlling self-ballasted lamps. Test Purpose Used to test the load switching capacity of switches for controlling self-...

Brand Name:Kingpo

Model Number:BS EN 50637:2017-Figure 201.103

Place of Origin:china

Loading pad, BS EN 50637:2017-Figure 201.103 Loading pad designed according to the standard BS EN 50637:2017-Figure 201.103 Model KP-06373 According to standard BS EN 50637:2017-Figure 201.103