Flow Measuring Instruments

Brand Name:kingpo

Model Number:FTech-ASTM162

Place of Origin:china

STM E162 Radiant Panel flame propagation properties Test apparatus for material for rail train Description ASTM E162 is one most widely used test standard to evaluate the propagation properties of material in USA. The heat resource use gas radiant panel ...

Brand Name:Kingpo

Model Number:7006-25A-2

Place of Origin:china

E27 Lampholder gauges | "GO" Gauge For Lampholder E27 | 7006-25A-2 Purpose: to check a) the minimum dimensions of the lampholder screw thread according to sheets 7004-21 and 7004-27 b) dimension X according to sheet 7005-20 c) the machnical ...

Brand Name:kingpo

Place of Origin:china

Walk-in Constant Temperature-humidity Test Chamber Function Description Constant Temperature and Humidity Test Chamber a.k.a. environmental tester is specialized in testing properties of various kinds of material’s heat resistance,cold resistance,dry ...

Brand Name:kingpo

Place of Origin:china

High Pressure Service Life Tester Function Description The tester can simulate products such as mobile phone to repeatedly press on tested sample.make aluminum round rod with some hardness as an indenter;drive it using air cylinder;adjust pressure to be ...

Brand Name:kingpo

Model Number:KP-CY-150 / KP-CY-500

Place of Origin:china

Ozone Resistance Test Chamber Function Description The product is suitable for examining the obvious difference of rubber material under difference ozone concentration and temperature.To what extent damage will be caused by tensile strain ozone test and ...

Brand Name:kingpo

Model Number:KP-CK10

Place of Origin:china

Residual Discharge Tester System Briefing: Applied to electronic remnant’s discharging experiment;auto-matically cut off at the peak and trough and come up with experimental data. Application field: electrical appliance remnant’s discharging experiment ...

Brand Name:kingpo

Place of Origin:china

Full Scale VOC Release Capsule Product Purpose Full scale VOC release capsule can provide standard testing environment(such as appointed temperature,relative humidity,air exchange rate and airflow rate) or simulate real indoor environment and test the ...

Brand Name:Kingpo

Model Number:KP-8475

Place of Origin:china

Vicat test -IEC62368 - clause - 5.4.1.10.2 Description: Vicat softening temperature uses single-chip control, LED digital display of temperature and deformation on the operation panel to set test parameters and test results can be read. During the test...

Brand Name:kingpo

Model Number:IEC62368-1-Figure Y.1

Place of Origin:china

Gasket test-IEC 62368-1-Figure Y.1 | Compression test Following the test specified in b), the same specimens shall be cooled for a period of 24 h to the minimum temperature specified by the manufacturer or -33 °C if no minimum ambient temperature is ...

Brand Name:kingpo

Model Number:KP-1200

Place of Origin:china

Zr-1200model mask resistance tester Product introduction Zr-1200 mask resistance tester conforms to yy0469-2011 technical requirements for surgical masks.When different airflow flows through a certain area of the mask, the pressure at both ends of the mask...

Brand Name:kingpo

Model Number:KP-1220

Place of Origin:china

ZR – 1220 model Mask tightness tester Product introduction ZR - 1220 type respirator fit tester is a mask/respirator fit test of special equipment, at the same time compatible with OSHA and GB GB 19083-2010 medical respirator technical requirements of the ...

Model Number:MS2675DN-IID

Place of Origin:china

Brand Name:kingpo

1. Product Overview 1.1 Product Profile The MS2675DN-IID tester is an insulation resistance tester, it has 4 sets of memory modes with RS232 and PLC interfaces. The test circuits provided by this tester meet the Household and Similar Electrical Appliances...

Brand Name:kingpo

Model Number:Model KP9280

Place of Origin:china

This Pink Noise Generator meets the requirements for pink noise in IEC 60065, Clause 4.2 and 4.3 and IEC 62368-1, Annex E. It is especially developed for all types of tone frequency amplifiers,when you need 2 channels/phase 90° Technical Specification •...

Brand Name:Kingpo

Model Number:ISO5356-figure A.1

Place of Origin:china

ISO 5356-1 Anesthetic and Respiratory Equipment – Conical Connectors – Part 1: Cones and Sockets ISO 5356-1 Introduction In clinical practice, several breathing attachments used in anaesthetic and respiratory equipment may have to be joined together to ...

Brand Name:kingpo

Model Number:7006-123-1

Place of Origin:china

GU10q Cap gauge 7006-123-1 Standard:IEC 60061-3,IEC 60968-1 test sample :GU10q Lamp Cap Material:Stainless steel

Brand Name:kingpo

Model Number:VDE0620-1

Place of Origin:china

DIN-VDE0620-1:2021 Bild 16a temperature rise plug gauge Prufestecker 2P+AC 16A DIN-VDE0620-1 plug and socket gauge Figure number Project name Qty DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum ...

Brand Name:kingpo

Model Number:ISO 10079-1

Place of Origin:china

ISO10079-1:2015 Test Equipment List ISO10079-1:2015 Test Equipment List Clause Name Test Name Note 6.1.2&7.5.2 Container capacity: (ISO10079-1, Sub-Clause 6.1.2) &Overflow protection of electrical suction equipment: (ISO10079-1, Sub-Clause 7.5.2) 6.1.3 ...

Brand Name:kingpo

Place of Origin:china

IEC 62368-1 Annex G.8.2.2 Resistor loading box 1. IEC 62368-1, Annex G.8.2.2 2. Resistance: 3840ohm(60W), 1920ohm(120W),960ohm(240W),480ohm(480W),240ohm(960W),120ohm(1920),60ohm (3840W),480ohm(short circuit) 3. The loading box should be metal enclosure wit...

Brand Name:kingpo

Model Number:KP62680

Place of Origin:china

IEC 62680- 1-2/ IEC 62680- 1-3 USB TYPE-C Compliance Testing Plan The EU officially issued the revised directive on universal chargers Directive (EU) in the Official communique 0J on 7 December 2022/2380 to supplement the specific implementation ...

Brand Name:SKYLINE

Model Number:SL-F15

Place of Origin:China

Product Description: The Flammability Testing Equipment is a crucial tool for conducting fire resistance testing on cables used for wiring or grid applications. With dimensions of 1750 mm (W) x 680 mm (D) x 1400 mm (H), this device is designed to ...