Flow Measuring Instruments

Brand Name:kingpo

Place of Origin:china

USB Type-C Connectors and Cable Assemblies Compliance - Figure D-1 Example of 4-AxIs Continuity Test Fixture Table D-1 Force and Moment Requirements Receptacle configuration with respect to mounting surface Force at 15 mm from receptacle shell mating edge...

Brand Name:kingpo

Model Number:IEC 62368

Place of Origin:china

IEC 62368 Test Equipment.IEC 62368-1 TESTING AND MEASURING EQUIPMENT No. Items Description 1 Temperature and humidity chamber IEC62368-1-cl.4.1.4 Model:KP-HWS1000L 2 Test Apparatus for device forming mains plug IEC62368-1-cl.4.7 Model :KP-LJ220 Technical ...

Brand Name:kingpo

Model Number:KP-QIV13

Place of Origin:china

Qi-v1.3-FOD Reference Foreign Object Annex A Reference Foreign Object construction (normative) A.1 Reference Foreign Object #1 (RFO#1) A.2 Reference Foreign Object #2 (RFO#2) A.3 Reference Foreign Object #3 (RFO#3) A.4 Reference Foreign Object #4 (RFO#4)

Brand Name:kingpo

Place of Origin:china

Test arrangement for checking mechanical withstanding of insulating materials in thin sheet layers 1.Application: This device is used to test the Insulation anti damage strength verification for non separable thin layer materials.Confirm to IEC60950 Safety...

Brand Name:kingpo

Place of Origin:china

Tabletop constant temperature and humidity test chamber. Product introduction: This machine is mainly used for small parts and a small amount of measurement, is the most reliable research and development of electronic products choice. Applicable to ...

Brand Name:kingpo

Model Number:ISO 80369-7 Fig C.2

Place of Origin:china

Male Reference Luer Slip Connector For Testing , Female Luer Connectors For Leakage ISO 80369-7 Fig C.2 Male reference luer slip connector for testing female luer connectors for leakage, separation from unscrewing, stress cracking and non-interconnectable ...

Brand Name:Kingpo

Model Number:ISO5356-figure A.1

Place of Origin:china

ISO 5356-1; Anesthetic and Respiratory Equipment – Conical Connectors – Part 1: Cones and Sockets ISO 5356-1 Introduction In clinical practice, several breathing attachments used in anaesthetic and respiratory equipment may have to be joined together to ...

Brand Name:kingpo

Model Number:IEC60601-2-52-Figure 201 .104

Place of Origin:china

Loading pad | IEC60601-2-52-Figure 201 .1 04 Loading pad 201 .5.1 02 Loading pad The loading pad (see Figure 201 .1 04) is a rigid circular object, (355+/–5) mm in diameter, the face of which has a convex spherical curvature of 800 mm radius with a 20 mm ...

Brand Name:kingpo

Model Number:ISO5356-figure A.1

Place of Origin:china

ISO5356-1 Gauges For Testing HME patient port connector ISO 5356-1 Anesthetic and Respiratory Equipment – Conical Connectors – Part 1: Cones and Sockets ISO 5356-1 Introduction In clinical practice, several breathing attachments used in anaesthetic and ...

Brand Name:kingpo

Model Number:KP-60601A

Place of Origin:china

ME Equipment Rough Handling Tester Comply with IEC60601-1,GB9706.1-2020 standard 9.4.2.4.2, 9.4.2.4.3, 15.3.5 chapter requirements Technical parameters: 1. Power supply: AC 220V 50/60HZ 2, driving mode: servo motor, horizontal drive, automatic simulation...

Brand Name:kingpo

Model Number:IEC 60695-11-2 Figure A.1

Place of Origin:china

Burner -IEC 60695-11-2 Figure A.1 name IEC 60695-11-2 Figure A.1 Burner Flame Test Equipment keyword flame burner Material brass

Brand Name:kingpo

Model Number:KP-FT02

Place of Origin:china

IEC60695-11-5 Table Type Needle Flame Tester for Assessing the Internal Fault Conditions Caused By Small Flame Product Description According to IEC60695-2-2 and IEC60695-11-5 Needle Flame Tester is applied in the production and quality control department...

Brand Name:kingpo

Model Number:KP-OT62

Place of Origin:china

IEC60065 Figure 11 Plug Torque Test Apparatus Product information: This plug torque tester conforms to the standard of IEC60065 figure 11. It is used for checking whether the mechanical stress which occurs when the Direct Plug-in Equipment with plug pin ...

Brand Name:kingpo

Model Number:KP-CG95

Place of Origin:china

IEC 62196 Vehicle Drive Over Testing Apparatus For Charging Plug Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is ...

Brand Name:kingpo

Model Number:KP-CG96

Place of Origin:china

UL 2251 Electric Vehicles Plugs Endurance with Load Tester Product information: The test equipment is used to verify whether electrical accessories such as electric vehicle charging interfaces, industrial plugs, socket-outlets and couplers can withstand...

Brand Name:kingpo

Model Number:62198

Place of Origin:china

Product Description IEC 62196-1 Test Plug Gauge Of Vehicle Connector Withdrawal Force Test Die Steel Product Overview: The Test Plugs Are Required By IEC 62196-: 2022 Clause 14.1.5, 14.1.6, According To The Relevant Standard Sheets, Shall Have Finely ...

Brand Name:KingPo

Place of Origin:China

25° Horizontal Angle Blankets Mechanical Strength Test Apparatus IEC60335-2-17 Figure BB.1 To BB.3 for Blanket Evaluation Product Specifications Attribute Value Dimension 2500*800*2500mm (L*D*H) Driving Sprocket Speed 33rpm/min Horizontal Angle of Arms 25...

Categories:Electrical Safety Test Equipment

Country/Region:china

Vacuum Current Carrying Hose Test Machine for IEC 60335-2-2 Testing Equipment Overview The Vacuum Current Carrying Hose Test Machine is a specialized testing apparatus designed to evaluate the durability, electrical safety, and mechanical performance of ...

Brand Name:kingpo

Model Number:KP-TP61B

Place of Origin:china

IEC 60601-1-Test Pin According to IEC 60601-1-figure 8 TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING IEC 60601-1:2005 + Am.1:2012 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Clause ...

Brand Name:KINGPO

BRTIRWD2206A 6 Aixs Robot 2200mm Arm Length 6KG Max Loading Product details BRTIRWD2206A type robot is a four-axis robot developed by BORUNTE for welding application industry. The robot is compact in shape, small in size and light in weight. Its maximum ...