Brand Name:HongCe

Model Number:HDD8301

Place of Origin:China

IEC 60745-2-5 Test Probe A With φ35*5 Stop Face For Circular Saws Test Test method: IEC60745-2-5 clause 19.101.2.2 The upper guard on the side opposite the motor need not completely cover the blade. The perpendicular projection of the upper guard on to the...

Brand Name:HongCe

Model Number:HT-I09

Place of Origin:China

IEC60950-1 Test Pin For Information Technology Equipment Test , Tip Diameter 3mm IEC60950-1 clause 2.1.1.1 Access to energized parts c) A test with the test pin, Figure 2B, which shall not contact bare parts at HAZARDOUS VOLTAGES when applied to openings...

Brand Name:HongCe

Model Number:HDD8301

Place of Origin:China

..., diameter 12mm, length 50mm Standard: IEC 60745-2-5 : Particular requirements for circular saws, clause 19.101.2 and Figure 105 Application: This probe is applicable to verify the upper guard protection against to touch the blade. Test sample: Circular ...

Brand Name:HongCe

Model Number:HT-I02A

Place of Origin:China

IEC60335-1 Clause 20.2 Test Probe With 50mm Circular Stop Face/ Finger Length 80mm Compliance is checked by inspection, by the test of 21.1 and by applying a force not exceeding 5 N by means of a test probe that is similar to test probe B of IEC 61032 but ...

Brand Name:HongCe

Model Number:HT-I32

Place of Origin:China

IEC60335-2-11 Test Finger Probe For Measuring Surface Temperatures 0.3mm Thermocouple IEC60335-2-11 11.101 Cooking ranges and ovens are placed as specified in 11.2. However, appliances intended to stand on the floor are positioned with their backs against...

Brand Name:HongCe

Model Number:HT-U14

Place of Origin:China

UL60950-1 Figure NAF2-3 Accessibility Wedge, Probe Tip Thickness 2mm​ Standard description(UL60950-1 clause F.4.4): For HOUSEHOLD / HOME OFFICE DOCUMENT SHREDDERS , a warning statement shall not be used in lieu of construction features that prevent access...

Brand Name:HongCe

Model Number:HT-I02T

Place of Origin:China

IEC60529-1 Test Finger Probe Test Finger Probe B With Force Of 10N , 20N , 30N Standard: IEC 61032 figure 2, IEC60950 figure 2A, IEC60884, IEC60335, UL507, and UL1278 figure 8.4. Application: This probe is intended to verify the basic protection against ...

Brand Name:HongCe

Model Number:HT-I04T

Place of Origin:China

Length 100mm Diameter 1mm - Test Probe D With 1 N Force Scale Display IEC60529 The 1mm test rod meets IEC61032 figure 4 test probe D and EN Standards including IEC60529 for IP4 and suffix D codes. It is used to verify the protection of persons against ...

Brand Name:HongCe

Model Number:HT-I23

Place of Origin:China

IEC62151 Figure 3 - Test Probe - Length 80mm Diameter 12mm - For Information Technology Equipment IEC62151 clause 4.2.2.1 Accessibility The equipment shall be so constructed that in USER ACCESS AREAS there is adequate protection against contact with bare...

Brand Name:HongCe

Model Number:HT-I01

Place of Origin:China

Diameter 50mm Test Probe A Made Of Stainless Steel And Nylon, Accord With IEC60529 IP1​ Product introduction: This probe made of stainless steel and nylon, the sphere made of stainless steel, the baffle and handle made of nylon. The diameter of sphere is ...

Brand Name:HongCe

Model Number:HT-I02

Place of Origin:China

UL1278 Figure 8.4 Articulate Probe Test Probe B - Verify Accessibility of Live Parts Product information: An electrical part of a heater shall be so located or enclosed that protection against unintentional contact with uninsulated live parts will be ...

Brand Name:HongCe

Model Number:HT-I03

Place of Origin:China

IEC 60065 Test Probe C 2.5mm Diameter 100mm Length for HAZARDOUS LIVE TEST IEC60065-2014 Clause 9.1 .5 Pre-set controls If a hole giving access to pre-set controls is marked as such on the enclosure or in the instruction for use, and the setting of this ...

Brand Name:HongCe

Model Number:HT-I04

Place of Origin:China

IEC 60065 Test Probe D 1mm Diameter 100mm Length for HAZARDOUS LIVE TEST IEC60065 Clause 9.1 .4 TERMINALS The use of a single-pole plug or a bare wire to make connection with a contact of a TERMINAL for earth or antenna or for audio, video or associated ...

Brand Name:HongCe

Model Number:HT-I06A

Place of Origin:China

ISO 20653 Test Finger Probe Test Probe 2 - 12.5mm steel ball Tolerance 0.05mm Standard:ISO 20653, IEC61032 figure 6 probe 2,IEC60529 of IP2. Application:It is intended to verify the degree of protection of enclosures against ingress of solid foreign ...

Brand Name:HongCe

Model Number:HT-U01

Place of Origin:China

UL507 Fig 9.2 Articulate Probe With Web Stop Test Finger Probe for Accessibility of Live Parts Description in UL507 Clause 9.1~9.3: 9 Accessibility of Live Parts 9.1 General 9.1.1 To reduce the risk of unintentional contact that involves a risk of electric...

Brand Name:HongCe

Model Number:HT-U03

Place of Origin:China

UL1278 UL507 Probe for Film-coated Wire 19.1 mm to Verify Accessibility of Live Parts​ Description in UL1278 Clause 8.1~8.5: 8 Accessibility of Live Parts 8.1 An electrical part of a heater shall be so located or enclosed that protection against ...

Brand Name:HongCe

Model Number:HT-U02

Place of Origin:China

UL507 Probe for Film-coated Wire ELECTRIC FANS TEST 101.6mm length 19.05mm Diameter Description in UL507 Clause 9.1~9.3: 9 Accessibility of Live Parts 9.1 General 9.1.1 To reduce the risk of unintentional contact that involves a risk of electric ...

Brand Name:HongCe

Model Number:HT-I02

Place of Origin:China

IEC62368 Jointed Test Probe / Finger Length 80mm Diameter 12mm​ Standard: Conforms to IEC 62368-1:2018 clause 5.3.2, T.3 and Figure V.2, IEC61032 figure 2 test probe B,IEC950 Figure2A, IEC884, IEC335, UL507, EN60529 figure 1, UL1278 figure 8.4 and etc. ...

Brand Name:HongCe

Model Number:HT-I33

Place of Origin:China

IEC60335-2-14 Stainless Steel Test Finger Probe Diameter 40mm For Hand Held Blender Product information: Hand-held blenders shall incorporate a biased-off switch, its actuating member being positioned in a recess or otherwise guarded to prevent accidental ...

Brand Name:HongCe

Model Number:HT-U14

Place of Origin:China

IEC 62368-1 Figure V4 Test Finger Probe Wedge Probe For Testing Document Shredders Standard description(IEC 62368-1 8.5.4.2.4): The media destruction device is tested with the wedge probe of Figure V.4 applied in any direction relative to the opening: −...