textile ignitability and burning tester

Brand Name:PRECISION

Model Number:SBB20

Place of Origin:CHINA

... Ignitability and Burning Tester is a crucial instrument. It is designed to comprehensively evaluate the ignitability and burning characteristics of textile fabrics, providing essential information for manufacturers, regulators, and consumers alike. 1.

Brand Name:GOLD

Model Number:GD-ASTM D6413

Place of Origin:China

...Burning Tester for Textiles ASTM D6413 Fabric Vertical Flammability Tester Introduction: This textile vertical burning tester is designed and manufactured according to relevant standards such as CFR 1615/1616, CA TB117, and ASTM D6413. It is primarily used to assess the flame retardancy of children's pajamas or pajama fabrics when exposed to a small open flame. ASTM D6413 Fabric Vertical Flammability Tester

Model Number:LR-JC-01

Place of Origin:China

Brand Name:Lonroy

...45° Textile Flammability Tester 1. Uses Touch screen control textile 45 ° burning tester is based on the specifications stipulated in the national standard 14645-2014 and developed, applicable to conform to the standard of all kinds of textiles under ...

Brand Name:ZL

Model Number:ZL-5044

Place of Origin:CHINA

... retardant properties of various flame retardant textiles.It is designed and made according to GB/T 5455-1997 standard, which can be used to measure the tendency of after flame time, flame retardant and carbonization of textiles. [ Basic Specification]

Place of Origin:China

Brand Name:HongCe

Model Number:HVF-5

...Burning Tester ISO9772-2001 / UL94 Product information: Foam horizontal burning tester conforms to the standard requirements of ISO9772-2001,UL94 and so on. It is suitable for testing the horizontal-vertical combustion performance of the small foam plastic sample whose density is no-less than the measured density of 250kg / m3. This product uses the integral intake ignition...

Brand Name:YUYANG

Model Number:YYX44

Place of Origin:China

...Tester Automatic Burning Tester Flammability Test Chamber Product introduction: Automotive interior accessories burning test device is based on the federal motor vehicle safety standards 302 in Europe, Canada and Japan, the equivalent of the standard is ISO3795. FMVSS 302 provides motor vehicle passengers. A combustible material is something that can burn (i.e., combust) in air. A combustible material is flammable if it ignites

Brand Name:Sinuo

Model Number:SN7710

Place of Origin:China

...Textile Fabrics Burning Behavior Flame Spread Properities Testing Chamber Application: The textile fabrics burning behavior tester is designed according to ISO 6941:2003 “Measurement of flame spread properties of vertically oriented specimens”. It is used to access the properties of textile fabrics in response to flame contract under controlled conditions, suitable for vertical burning...

Brand Name:YUYANG

Model Number:YYF002

Place of Origin:China

Description: The plastic combustion performance test machine is suitable for measuring and evaluating the combustion characteristics of plastic materials. Flash point and auto-ignition point tester for measuring the temperature of the plastic flash fire...

Brand Name:Delta

Model Number:BCV

Place of Origin:China

...Burning Tester Introduction: BCV Bunched Cable Fire Testing Cable Burning Tester is a series conforming to IEC 60332-3-10 (Category A~D) standards. The test measures the expansion of vertical flame to the electronically or optically vertical cable or wire using the standard ignition...

Brand Name:kingpo

Model Number:KP-FM302

Place of Origin:china

... 6 Horizontal Burning Tester Product introduction The instrument consists of two parts: the control box and the combustion box. The sample is clamped flat by the clamp and placed on the bracket of the combustion box. The flame is ignited by the control...

Brand Name:BAXIT

Model Number:BXT-3137

Place of Origin:Shanghai, China

Needle flame and horizontal vertical test machine Product introduction SPZY-2 horizontal and vertical and needle-flame combustion machine, which fully meets the national standard and related new UL and IEC standard equipment, is the only original ...

Place of Origin:China

Brand Name:GC

Model Number:GC-ZRS-C

Glow Wire Flame Test Chamber With Manual Control Product Description This testing machine is mainly used to simulate the thermal stress caused by heat sources or ignition sources such as hot components or overloaded resistors in a short time under fault...

Brand Name:Haida

Model Number:HD-W810-5

Place of Origin:China

...Tester Application Flammability Tester is used to test the burning properties of textile fabrics, such as clothing fabrics, decorative fabrics, tent fabrics, etc. Testing standard GB/T 14644 Textiles - Determination of burning rate in 45° direction 16CFR 1610 American clothing fabric flame retardant standard ASTM D1230 for textile flammability testing Technical parameters Ignition...

Brand Name:SKYLINE

Model Number:SL-S18T

Place of Origin:China

... properties of vertically oriented specimens. It is also applicable to all kinds of textile material of flammability test; Technical parameters The ignition time setting range 0 ~ 99.99 s The combustion timing range 0 ~ 999.9 s Fire mouth Angle with the

Brand Name:TESTEX

Model Number:TF310

Place of Origin:China

...Igniter 45 Degree Flammability Tester for Fabric Flammability Test 35 kg Application 45 Degree Flammability Tester: This tester is used finding out the material flammability (fabric burning test) under controlled conditions. The automatic igniter is provided to make sure the 45-degree fabric flammability tester...

Brand Name:JIEDONG

Model Number:JD-3051

Place of Origin:Guangdong, China

...-shaped burner of a specified size (Φ0.9mm), and uses a specific gas (butane) to ignite the sample at a 45° angle to see if the sample is ignited and burned. And the length of the burn to assess the fire risk of small flames inside the equipment due to

Brand Name:lixian

Model Number:HZ-Building Material Fire Tester-12

Place of Origin:CHINA

... smoke generated by the determination of smoke, is the test of textile materials, solid material burning smoke production of special equipment. Building Material Fire Tester Standards compliant: GB / T 8627, ASTM D2843 Building Material Fire Tester The

Brand Name:HOOHA

Model Number:FTech-FTPC 7

Place of Origin:DONGGUAN

...Textiles and Films Fire Resistance Tester High precision Textiles and Films Fire Resistance Tester Introduction: This tester is designed according to IMO FTPC PART 7. It can test the flame spread state under the small flame . It is used to simulate the textiles and films under risk of ignition...

Brand Name:Gaoxin

Model Number:GX-CZF-B6

Place of Origin:China

The instrument is an integral box design, mainly composed of a control system and a combustion chamber. The sample is installed on a sample holder inclined at a 45° angle in the combustion chamber, and the burner is close to the sample, and the sample is ...