signal superimposer video optical multiplexer

Brand Name:AEO

Place of Origin:China

...Video Multiplexer 500m 4 BNC with RS485 Control Through Analog Signal Superimposer Technical Parameters Nominal input & output level 1 Vp-p Nominal input & output impedance 75 Ω Video interface 4 Channels Transmission distance 500m Video interface type BNC Trunk interface type BNC Transmission signals Video, RS485 Operating temperature -20℃ ~ 70℃ Working voltage DC 12 V ±5% MTBF 50 000 hours Overview 4ch Video Multiplexer...

Brand Name:Fiber Linker

Model Number:FL-VM-201

...difficult construction. Using frequency reuse and signal superimposed technology makes 1 channel 485 control signal (alarm signal, audio signal) or a video signal superimposed onto another 1 channel video signal transmission with a video coaxial cable. You

Brand Name:ho-link

Model Number:H-TVI/CVI/AHD-1V1D-T/RF

Place of Origin:China

...video optical transmitter and receiver (1 channel video+audio) video over fiber converter, FC, 20KM 1080P Description 1-channel video digital video optical multiplexer adopt the advanced international digital video and optical fiber transmission technology. It can transmit 1-channel video signal via 1 fiber cable real-time, synchronously, no-distortion and high quality . 1-channel digital video optical multiplexer...

Brand Name:FOCABLE

Model Number:1310/1550nm WDM

Place of Origin:China

...Optic Multiplexer 1310 / 1550nm , High Channel Isolation Wavelength Division Multiplexer (WDM) is the device which uses multiple optical maser to transmit multi beam of different wavelengths of laser technology through a single fiber. Each signal is transmitted in its unique channel after the data (text, voice, video...

Brand Name:HILINK

Model Number:HL-CW-mux-Nch

Place of Origin:Guangdong, China

...Optic Multiplexer -40°C - 85°C Operating Temperature Description Coarse Wavelength Division Multiplexing (CWDM) is the use of the Fiber Optical Multiplexer to different wavelengths of light signals multiplexed to a single optical fiber for transmission, at the receiving end of the link, with the Fiber Optical Multiplexer fiber mixed signal is decomposed into different wavelengths signal...

Brand Name:KCO, Kocent Optec Limited

Model Number:KCO-CDWM-MD-LGX-6CH-LCU

Place of Origin:Guangdong, China

...) is a low-cost WDM transmission technology for metro and access networks. - CWDM is to use optical multiplexer to multiplex optical signals of different wavelengths into a single fibre for transmission. - At the receiving end of the link, with the help of

Brand Name:NUFIBER

Model Number:NF-1V1D-T/R-F20

Place of Origin:China

...quality video using 8-bit digitally encoding and decoding over one multimode or single-mode optical fiber. The modules are directly compatible with NTSC, PAL or SECAM CCTV camera systems. These multiplexer units are typically used in applications that have

Brand Name:Gezhi

Model Number:CWDM12CH

Place of Origin:China

...single fiber to transmit signals. At the receiving end of the link, the mixed signal is decomposed into signals in the fiber by means of an optical demultiplexer. Different wavelengths are connected to the corresponding receiving equipment. The device has

Brand Name:Takfly/OEM

Model Number:8CH CCWDM

Place of Origin:China

... port. Compatct CWDM is the use of the Fiber Optical Multiplexer to different wavelengths of light signals multiplexed to a single optical fiber for transmission, at the receiving end of the link, with the Fiber Optical Multiplexer fiber mixed signal is

Brand Name:Fiberhome

Model Number:FONST 3000 OSCAD

Place of Origin:China

... signal, and provides line input / output signal monitoring ports. It can monitor the spectrum performance of the line input / output optical signal without interrupting services. The OSCAD card receives the line signal and demultiplexes it into the

Brand Name:Gezhi

Model Number:CWDM12CH

Place of Origin:China

...single fiber to transmit signals. At the receiving end of the link, the mixed signal is decomposed into signals in the fiber by means of an optical demultiplexer. Different wavelengths are connected to the corresponding receiving equipment. The device has

Brand Name:E-link China

Model Number:LNK-MV401

Place of Origin:Shenzhen, China

...the control signal of rs485 reverse controller in one coaxial cables transmission. The Video Multiplexer is composed of a Transmitter and a Receiver. From the receiver to the transmitter, it transmits 2~6 channel video signals through one coaxial cable to

Brand Name:Seacent

Model Number:CWDM insert type 16CH mux/demux

Place of Origin:Guangdong,China

...Optical Multiplexer Module Description: CWDM is using optical multiplexers to reuse different wavelengths of light into a single fiber to transmit signals. At the receiving end of the link, the mixed signal is decomposed into signals in the fiber by means of an optical...

Brand Name:Yogel

Model Number:FWDM-T15-ASC-R13/14-ASC-PLGX

Place of Origin:Shanghai

...design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, low-temperature sensitivity, and epoxy free optical path. With high reliability in a wide temperature range, it is suitable for a wide range of

Brand Name:Linkopto , or OEM

Model Number:LTU-40CH-AAWG-Mux ( Demux )

Place of Origin:China

...Optical Multiplexer , DWDM Mux Demux Customized Express Port Description AAWG DWDM Mux Demux Linkopto Athermal Arrayed-Waveguide Grating mainly is used in DWDM system. It transmits signal by making different ITU-T DWDM wavelength signals multiplex to single fiber in receiving terminal. It decomposes composite signal into different ITU-T DWDM wavelength signal...

Brand Name:E-link

Place of Origin:China

Model Number:LNK-PDH-E4G4-SFP

4E1 4GE Phone SNMP HDMI Fiber Extender Optical Multiplexer 4E1+4GE+Phone+SNMP Fiber Optical Multiplexer Overview This device is the point-to-point optical transmission device developed on the basis of VLSI. The device provides 1-4*E1 interface, 1-4*10/100/...

Brand Name:Geehe or OEM

Model Number:Geehe-1✖2 Single Mode WDM

Place of Origin:China Mainland

... signal into the Er-fiber. 1310/1550 WDM can be used to combine or split 1310nm and 1550nm optical signals, which double the fiber transmission capability and ensure bi-direction communication in a single fiber. Features: 1) Low excess loss 2) Low ...

Brand Name:HJY

Model Number:HJY-CCWDM-8~18CH-Module

Place of Origin:China

...Optical Network with 18CH Compact CWDM CCWDM Multiplexer CCWDM Module Application 1. Telecommunications Applications *Fiber Optic System Capacity Boost: CCWDM modules in fiber optic networks multiplex diverse wavelength optical signals into one fiber. In metro network access, operators use them to combine users' signals...

Brand Name:Wangtong

Model Number:CWDM20CH

Place of Origin:China

... which multiplexes a number of optical carrier signals onto a single optical fiber by using different wavelengths (i.e., colors) of laser light. This technique enables bidirectional communications over one strand of fiber, as well as multiplication of