mfr mvr plastic test equipment

Brand Name:LIYI

Model Number:LY- RR

Place of Origin:China

Name: MFR / MVR Plastic Testing Equipment / Melt Flow Index Tester Product Introduction: Quick Detail Machine size(W*H*D) 250*510*350mm Power AC220V±10% 50Hz Barrel parameters Inner hole 9.55±0.025mm Pistons parameters Piston head: 9.475±0.015mm Piston ...

Model Number:ZL-3078

Brand Name:ZL

Place of Origin:Guangdong, China

... testing equipment developed in accordance with GB/T 8323.2-2008 national standards. This instrument determines the specific optical density of smoke produced during plastic combustion, using maximum specific optical density as the test result to

Model Number:XGY-10C

Brand Name:JHH

Place of Origin:Beijing, China

...Testing Machine Professional testing equipment for plastic and composite pipes, designed for constant pressure and burst testing applications. Product Overview This hydrostatic pressure testing machine evaluates the pressure withstand performance of end caps, flanges, and pipes. With a peak pressure of 10MPa within a 0-100bar testing...

Brand Name:KEJIAN

Model Number:KJ-3092

Place of Origin:China

MVR MFR MFI Tester/ Plastic Melt Flow Index Tester Plastic Testing Machine​ Uses: KJ-3092 melt flow rate testing instrument can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-R803-1

...Plastic Testing Equipment Product Description Melt Flow Index tester is used to determine melt-mass flow rate (MFR).melt-Volume flow rate (MVR) and melt density of thermoplastic resin.it is applicable not only to the higher melting temperature, such as polycarbonate, nylon, Fluoroplastics, poly oxide and other engineering plastics, and it also applies to plastic...

Brand Name:YUYANG

Model Number:YYW098

Place of Origin:China

ISO 1133 ASTM D1238 Melt Flow Index Tester Description: The melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) are determined by extruding molten material from the barrel of a plastometer under preset conditions of temperature and load. For melt...

Place of Origin:China

Brand Name:High voltage leakage trace testing machine

Model Number:CF8427

... category, this product is engineered to meet the rigorous demands of quality control and research in the plastics industry. Its advanced features and robust construction make it an essential tool for laboratories and manufacturing units focusing on

Brand Name:DAXIAN

Model Number:DX8534

Place of Origin:China

...application: Mainly applicable to the determination of plastic test pieces, thermal deformation HDT... Three-point loading under the bending stress deformation temperature and plastic Vicat softening temperature test method ... plastic samples under the

Brand Name:LONROY

Place of Origin:Guangdong, China

Model Number:LR-A001-C

MFR MVR Testing Machine /Electronic Loading Melt Flow Index Tester Plastic Test MFR MVR Testing Machine /Electronic Loading Melt Flow Index Tester Discription: This is for high-precision melt flow rate instrument tester, used for testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR/MVR...

Brand Name:Infinity Machine

Model Number:RS-8233

Place of Origin:Made in China

...Plastic Testing Equipment Heating Distortion Resistance Testing Application: Apply for plastic heating deformation resistance testing, put the testing sample on two supporting point in testing machine, forcing the heating rod and rising temperature with 2℃/min. when the center of the testing sample sinking to a specific position (plastic...

Brand Name:Haida

Model Number:60087-HD

Place of Origin:China

HD-DRH-V Thermal Conductivity Tester The thermal conductivity tester is mainly used to test plastic, rubber, glass, fiber, benzene board, extruded plastic board, foamed concrete, hollow glass, wood board, all kinds of heat preservation materials and other...

Brand Name:vouch

Model Number:5600

Place of Origin:china

Automatic Plastic Testing Equipment Combustion Simulation Fire Hazard Test Lab Technology data: Accord with standard:IEC-60695,GB5169 Size:1120w*600d*1020h Flame height adjust:5-...

Brand Name:YOUBI

Place of Origin:CHINA

Model Number:UP-5004

...testing instrument with advanced temperature control accuracy for plastic materials analysis. Product Description The UP-5004 melt flow rate testing instrument is designed to determine the melt flow rate (MFR) or melt volume flow rate (MVR) of various plastic...

Brand Name:JHH

Model Number:XNR-400C

Place of Origin:Beijing, China

...Testing Instrument for Plastic Material Flow Rate Analysis and Evaluatio Summary: XNR-450F tests thermoplastics' MFR/MVR per GB/T 3682—2000, covering PE, PP, ABS, etc. It auto-controls temperature, shows data on a digital screen, and offers manual/automatic/time-controlled cutting. Models AD/BD auto-print data and support new-standard MFR/MVR testing. Technical Parameters: Model No. XNR-400C Measuring Method MVR & MFR...

Brand Name:YUYANG

Model Number:YY166

Place of Origin:China

ASTM D3364 100~450℃ Melt Flow Index Tester MFR MVR Thermoplastics Function The melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) are determined by extruding molten material from the barrel of a plastometer under preset conditions of temperature...

Brand Name:SHC

Model Number:SC-XZ

Place of Origin:China

MFR And MVR Mfi Melt Flow Index Test Equipment Melt Flow Indexer Product Specifications: Model No SC-MI-400 Machine size(W*H*D) 250*540*390mm Temperature ...

Brand Name:LIYI

Place of Origin:China

Model Number:LY-RR

..., polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Characteristics: 1. Fast heating speed, very small overshoot. 2.

Brand Name:LB

Model Number:MFR

Place of Origin:China

... MVR and MFR Tester is suitable for testing fluorine plastic, nylon and other engineering plastics, it is also used to test polyethylene (PE), polypropylene (PP), polyacetal (POM), polyphenylene ethylene (PS) ABS resin, polycarbonate and other plastics.

Brand Name:AI

Model Number:MFR

Place of Origin:China

...nylon and other engineering plastics, it is also used to test polyethylene (PE), polypropylene (PP), polyacetal (POM), polyphenylene ethylene (PS) ABS resin, polycarbonate and other plastics. Features: PLC control, LCD display, following parameters will be

Brand Name:AISRY

Model Number:ASR-5606

Place of Origin:CHINA

...Test Machine Plastic Bottles Drop Tester/Drop Test Equipment Price Product Description Application: Plastic izod impact test machine is mainly used in hard plastic (including plank, materials, plastic profile), the increase of nylon, glass fiber reinforced plastic...