incinerator bottom ash processing

Brand Name:Hengyang

Model Number:HYL-063

Place of Origin:China

... plants, the leftover ash is not all powdery but contains glass, brick, rubble, sand, grit, metal, stone, concrete, ceramics and combusted products such as ash and slag. In order to avoid landfill disposal and recover the most of the valuable material,

Brand Name:MICH

Model Number:WIPAHEHT

Place of Origin:China

...Incineration Plant Ash Hopper Electric Heat Tracing Waste Incineration Plant Ash Hopper Electric Heat Tracing is a special heat trace solution based on MI heating cable for the ash hopper in waste incineration power plant to prevent ash condensing. The flying ash cooling in ash hopper in waste incineration power plant may cause ash solidification, compression or agglomeration and lead to the clogging of ash hopper. Garbage incineration

Place of Origin:Shandong, China

Brand Name:BETTER

Model Number:WFS

#detail_decorate_root .magic-0{width:750px}#detail_decorate_root .magic-1{overflow:hidden;width:750px;height:538.5px;margin-top:0;margin-bottom:0;margin-left:0;margin-right:0}#detail_decorate_root .magic-2{margin-top:0;margin-left:0;width:750px;height:538....

Brand Name:WP

Model Number:LW

Place of Origin:CHENGDU,CHINA

...material with light weight and fine particle size collected by the flue gas purification system in a waste incineration power plant. The ash contains not only a large amount of heavy-metal inorganic harmful substances such as Cd, Cr, Cu, Ni, Pb and Zn, but

Brand Name:Huaemw

Model Number:HY-MF1512

Place of Origin:China

...Ashing Chamber Furnace, Vent Port And Monitoring Window Product Features The Microwave Ashing Chamber Furnace HY-MF1512 has a built-in gas fan to extract flue gases from the furnace chamber while simultaneously supplies fresh air to the furnace, which will ensure that oxygen is always suffcient for the incineration process. Appliacitions HY-MF1512 is especially suitable for pretreatment,carbonization and ashing process...

Place of Origin:China

Brand Name:Gathering

Model Number:GRRO-25

... HYINC-18 is equipped with single door in front,which are intended for loading Of solid waste and ash removing,the incinerator in stand-by mode(com.tem.less than 220°C),the doors can be opened properly.if the incinerator is running in cooling down

Brand Name:ZK

Model Number:1.6x32m-4.7x72m

Place of Origin:China

Enverinomental Friendly Waste Disposal Incinerator Rotary Kiln Horizontal Calcining Rotary Kiln Incinerator Applicable material: Hazardous waste, sludge waste, medical waste, steel mill flue ash, sugar residue, paper mill residue, aluminum slag, ...

Categories:Medical Waste Incinerator

Country/Region:china

...Incineration Customized Rotary Kiln Incinerator for Burning Treatment Production Description: This system is designed for the incineration and treatment of medical waste, It is capable of handling medical waste in vari­ous forms such as solid, semi-solid, and liquid. Our advanced system ensures that the com­bustion process...

Place of Origin:MADE IN CHINA

Brand Name:KANGWEI

Model Number:BIOMASS POWER PLANT

4MW - 30MW Professional Waste Incineration Power Plant Environmentally Friendly 1. Biomass consists of organic residues from plants and animals which are obtained primarily from harvesting and processing of agricultural and forestry crops. Biomass are ...

Brand Name:Dongdai

Model Number:ZTFS

Place of Origin:China

China Continuous City And Village Domestic Rubbish Incinerator Plastic Products Glass Products And Residual Medicine​​ Description Microwave processing technology The core technology of microwave thermal effect sterilization treatment is to use the ...

Brand Name:Facerom

Model Number:FMJ-07/13

Place of Origin:China

Box type incineration muffle furnace Industrial Muffle Furnace FMJ laboratory Box-type Ashing Furnaces upto 1300℃ Description: This type of furnace becomes the best choice for the multi-purpose experiments of the laboratories for its compact design, ...

Brand Name:Meibao

Place of Origin:Zhejiang, China

...incinerator Product Description Regenerative Thermal Oxidizer is also called Regenerative Thermal Oxidation Furnace.Referred to as “RTO incinerator”.It is mainly applied to deal with the low concentration and high air volume organic waste gas (VOC) .Two-chamber and three-chamber structures are common in RTO incinerator. Dealing with high air volume can according to process...

Place of Origin:China

Brand Name:Eternal Bliss

Model Number:EB3007

...;Cr14Ni9; Quality Level: As per National Standard & International Standards. Production Process: Investment Process & Centrifugal Process & Sand Process Including machining process. Special Features: 1. We can make Heat castings with Investment Process &

Place of Origin:China

Brand Name:Jialong veneer

Model Number:Dyed veneer

...Ash Dyed Wood Veneer ,0.45 Mm Thick Dyeing Ash Veneer Quick Detail: Veneer Type: Dyed Veneer Description: 1) enhance the beauty of natural wood veneer 2) pronouced pattern of grain with vivid aesthetic feeling. 3) more color vange available for specifiers 4) The possibility of eliminating stain upon the veneers 5) Adjust strong color difference between the darker or lighter grains. 6) Processing...

Brand Name:LIYI

Model Number:LY-612

Place of Origin:CHINA

...Ashing Furnace Product Description: High temperature ashing furnace for special baking process can be used for aging test of electronic components and plastic chemical products together with iron preheat, quenching, burn, stewing, annealing, ashing test, concise and other high fever processing...

Brand Name:CB

Model Number:JKY-120S

Place of Origin:CHINA

...of the mud, the appearance of neat. Fully suitable for a code burning process requirements, high productivity, low molding water content, reducing energy consumption and loss in production. Is the production of all gangue, high volume fly ash, shale and

Brand Name:Dehai Boiler

Model Number:Superheater

Place of Origin:China

...o superheated steam or dry steam. It is used in power stations. 2. Super-heaters are used in steam engines or in processes, such as steam reforming. 3. There are three types of super-heaters: radiant, convection, and separately fired. A super-heater can

Brand Name:NC8734

Model Number:8734

Place of Origin:Mainland China

... Parts And Accessories Grate Bar For Incinerators Product Details Material Stainless steel, Carbon steel, Alloy steel Application Industry Machinery, Automotive, Electricity Process Mould, Casting, CNC Machining Machining Process CNC Lathe, CNC milling ...

Brand Name:SUPER

Model Number:SP-1200B-12L

Place of Origin:China

...Lab Burning Ashing Muffle Furnace 1100℃ Electric Lab Burning Ashing Muffle Furnace Fast Heating What is an Ashing Muffle Furnace ? The purpose of an ashing muffle furnace is to burn off or “ash” organic material from a sample. This process involves ...