iec60335 1 clause 2 scratched test pin

Brand Name:kerang

Model Number:HT-I34

Place of Origin:CHINA

...:Home appliance fixed insulation accessible part and coated printed board. Feature:Test method: make sure the angle between the pin and the surface of the sample is 80-85°. Then use the pin which is loaded with the axial force of 10±0.5N to scratch the

Brand Name:Pego Group

Model Number:PG-HSP

Place of Origin:China

IEC60335-1 Clause 21.2 Scratch Test Pin Made of Hardened Steel 1. Introduction Hardened steel Pin is designed according to IEC60950 clause 2.10.8.4 and IEC60335-1 clause 21.2. It is applied to do scratch test for accessible parts of solid insulation of household appliance and printed circuit boards, to ensure the material has sufficient strength to prevent penetration by sharp implements. The hardened steel pin...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I34

Scratched Pin Electric Safety Testing Probes Product information: The test pin is used to do the scratch resistant test of the electrical solid insulation surface. It conforms to the standard requirement of IEC60335-1 clause 21. Test method: make sure the angle between the pin and the surface of the sample is 80-85°. Then use the pin which is loaded with the axial force of 10±0.5N to scratch...

Brand Name:JLX

Model Number:LX-R03

Place of Origin:Made in China

...standard requirement of IEC60335-1 clause 21. Test method: Make sure the angle between the pin and the surface of the sample is 80-85°. Then use the pin which is loaded with the axial force of 10±0.5N to scratch the surface of the sample at a speed of

Brand Name:KingPo

Place of Origin:China

IEC60335 Electrical Safety Testing Probe Pin For Scratch Resistance Test IEC60335-1 Clause 21 Scratched Pin For Scratch Resistance Test Of The Electrical Solid Insulation Surface Product information: The test pin is used to do the scratch resistant test of the electrical solid insulation surface. It conforms to the standard requirement of IEC60335-1 clause 21. Test method: make sure the angle between the pin...

Brand Name:KingPo

Place of Origin:China

...household appliances. It conforms to the standard requirement of IEC60950 clause 2.10.8.4 and IEC60335-1 clause 21.2. This device adopts a hardened steel pin for scratching. The end of the pin is form of a cone having a tip angle of 40°, its tip being

Brand Name:Sinuo

Model Number:SN1106

Place of Origin:China

IEC60950-1 Insulation Surface Abrasion Resistance Testing Equipment Product overview: The insulation surface abrasion resistance test appratus is used to check abrasion strength of printed circuit boards or the insulating accessible parts of the household ...