iec 60312 1 impact test equipment

Brand Name:HongCe

Model Number:HCVC01

Place of Origin:China

... whole system is composed of dust removal and dust spread test platform, air performance test platform, dust beating platform, carpet hanging rack, frequency conversion power supply and central control cabinet. Standard of Home Appliance Testing Equipment:

Brand Name:Sinuo

Model Number:SN1714

Place of Origin:China

IEC 60312-1 Vacuum Cleaner Threshold Or Hitting Doorpost Impact Test Equipment Standards For Vacuum Cleaner Threshold Or Hitting Doorpost Impact Test Equipment: This bump testing equipment meets the requirements of IEC 60312-1 clause 6.7, figure 14 and 15. It is used to assess the vacuum cleaner's ability to resist bump when passing through a threshold or hitting a doorpost. A total of 500 cycle tests...

Brand Name:YUYANG

Model Number:YY613

Place of Origin:China

IEC 60331 Wire and Cable Fire-resistance Impact Testing Equipment Descriptions: Wire and Cable Fire-resistance Impact Tester is used to detect the fire resistance of cable wiring or power grid, burning in not less than 830 degrees, the flame, and exerts certain impact vibration, cable integrity test circuit. Standards: IEC 60331 Testing of wire and cable - circuit integrity under flame conditions IEC...

Brand Name:Gaoxin

Model Number:GX-5066-NE

Place of Origin:China

... (or battery pack) on the battery subjected to free weight impact from different heights from different heights, resulting in internal short circuit of the battery. Specification Drop hammer mass 9.1kg Impact height 0~1000mm adjustable(usually 610mm)

Brand Name:PEGO GROUP

Model Number:PG-IK

Place of Origin:China

...Impact Test Equipment with 2J to 20J Stainless Steel Pendulum Impact Hammers 1. Introduction IK pendulum hammer is designed according to IEC60068-2-75 and IEC62262 (equivalent EN62262) , and can meet the test requirements of IEC60598, EN50102. The IK Code was originally defined in European Standard BS EN 50102:1995 and amended in 1998, following its adoption as an international standard (IEC...

Brand Name:Sinuo

Model Number:SN2122C

Place of Origin:China

...11 standards. Equipment Overview 1. Main purpose: This device is composed of two kinds of impact test apparatuses, and two kinds of mechanical strength test methods can be used to perform impact test on EVSE shell. 2. Installation sample: installation of a

Brand Name:ASLI

Model Number:AS-DB-200

Place of Origin:China

Ball Drop Impact Test IEC 60950-1 Impact Test Using A Steel Ball Testing Machine Over 20years factory in China Fast delivery 1 year warranty Professional technical support Drop Ball Impact Tester used to measure the impact resistance by the specified steel...

Brand Name:LABTONE

Model Number:IST300

Place of Origin:CHINA

...Impact Testing Equipment With ISTA, IEC Standard I. Product Application Incline shock tester is mainly used to simulate the impact and damage resistance of product packaging in a real environment, such as handling, loading and unloading, impact during shifting from one cabin to another and impact...

Brand Name:KINGPO

Place of Origin:China

... information: The specimens are subjected to an impact test by means of an apparatus as shown in figure 27. The apparatus, positioned on a pad of sponge rubber 40 mm thick, is placed together with the specimens in a ...

Brand Name:SHC

Model Number:SC-VST

Place of Origin:China

...Impact Testing Machine With Electronic Control Parameters: Test object Equipment enclosures Reference standard IEC 60950, IEC 60065, IEC 60598 Test Impact test - drop and swing Drop height 500-1500mm Impact steel ball 500g Release mode electronic control Swing impact available Power supply 220V 50Hz Description: This device is suitable for drop impact test for equipment enclosure, verify the merchanical strength of equipment

Brand Name:HJ

Model Number:SH-12

Place of Origin:China

Impact Testing Machine Impact Test Using A Steel Ball With 0.5-15m Drop Height Standard: IEC 60598-1 ‘Luminaires – Part 1: General requirements and tests’ clause 4.13.4 a); IEC 60950-1 ‘Information technology equipment – Safety – Part 1: General requirements’ clause 4.2.5 Impact test; IEC 60065-1 ‘Audio, video and similar electronic apparatus – Safety requirements’ clause 12.1.4 Impact test Application: This device is suitable for drop impact

Brand Name:I-suntop

Model Number:GFK-1000

Place of Origin:China

...Optical Fiber Cable Impact Testing Machine is intended to determine the ability of optical fiber cable withstand impact. Apparatus The apparatus allows a hammer with a 25mm rounded edge to drop vertically on a cable sample fixed on a flat steel plate. The

Brand Name:kingpo

Model Number:KP-SH06

Place of Origin:china

Spring Impact Hammer For IEC60068-2-75 IEC Test Equipment Standard: IEC 60068-2-75 Environmental testing –Part 2-75: Tests – Test Eh: Hammer tests. IEC 60065, IEC60335-1, IEC60598-1 and etc. Feature: The construction consists of a moving hammer head...

Brand Name:KeRang

Model Number:KR-GQCJ-010

Place of Origin:China

...Impact Device Standard: IEC 60950-1 Clause 4.2.5, IEC 60598-1 Clause 4.13.4a), IEC 60065 Application: This device is suitable for drop impact test for equipment enclosure. Test sample: Luminaries, Audio, video and similar electronic apparatus, Information technology equipment Feature: Equipment can carry out test in two forms of vertical drop and swing impact Parameters: Impact...

Brand Name:DAXIAN

Model Number:DX8403

Place of Origin:China

IEC 60811-504:2012 Mandrel Test Apparatus & Impact Test Apparatus 1. Remark: The electric low-temperature winding test device is suitable for evaluating and measuring the performance of round cables or round insulated cores at low temperature. The manual ...

Place of Origin:China

Brand Name:ALLIED TESTING

Model Number:TP02

... of person aganist access to to harzardous parts of an IP2 code.Also used to verify protection from access with the back of the hand for an IP suffix B code. Standard test finger probe is made of plastic and steel,very precision.

Brand Name:LCS

Model Number:Safety requirements for power electronic converter systems and equipment – Part 1: General,Impact test

... or Method: SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT –Part 1: General IEC 62477-1:2022 5.2.2.4.3 SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT –Part 1: General EN IEC 62477-1:2022 5.2.2.4.3

Brand Name:AI

Model Number:CFRTM

Place of Origin:CHINA

... refers to IEC60332-3 test.This wire and cable fire-resistant impact test equipment is designed according to IEC 60331-12 and BS6387 -2013 standard. It is used to test if the circuit will maintain integrity under flame temperature is not lower than 830ºC,

Brand Name:ZL

Model Number:ZL-2823D

Place of Origin:China

..., automotive components, transportation and other fields. It can be used with waveform generator for half-sine wave impact test. Meet standards: GB/T2423-2008, GJB150, GJB360, GJB548, GJB1217, MIL-STD-202F, IEC-68-2-27, MIL-STD-810F, MIL-STD-883E and other

Brand Name:Kinte

Model Number:WH-8808

Place of Origin:Guangdong,China (Mainland)

... with 100mm back-end power cord at the cut, as a specimen, into the drum, according to the provisions of the specimen weight set the number of scrolling, so that the test piece falling impact, and then check the extent of damage. The main parameters: 1,