glow wire ignition test

Brand Name:DAXIAN

Model Number:DX8383

Place of Origin:China

...Glowing Wire Ignitability Test Machine Overview: The glow wire test is to test the stability of electronic and electrical products during operation. The glow wire itself is actually a resistance wire loop with a fixed specification. During the test, it must be heated to a specified temperature by electricity, so that the tip of the glow wire contacts the sample for a standard time, and then observe and measure its state. The test...

Brand Name:HongCe

Model Number:GW-2

Place of Origin:China

... of an insulating material from an electrically heated wire is described in the Method for Glow-Wire Ignitability Test on Materials, IEC 695-2-1 /3. Flammability Testing Equipment 34.1 .2 The Glow-Wire Ignition Temperature (GWIT) is to be assigned as the

Model Number:FGW

Glow wire ignition tester,safety test equipment Model FGW: Glow wire ignition tester,safety test equipment Glow wire ignition tester,safety test equipment is designed to test the resistance to fire of insulating parts. It assesses the susceptibility of electrical insulating materials to ignition as a result of exposure to a glowing wire.This test method determines the minimum temperature required to ignite a material by the effect of a glowing

Categories:Rubber Testing Equipment

Country/Region:china

...Glow Wire Flammability Test Chamber IEC 60695‑2‑10 for Electronic Plastic Insulating Material Fire Hazard Test Product Introduction The Glow Wire Flammability Test Chamber simulates thermal stress caused by overheated electrical components under fault conditions. This equipment evaluates the fire hazard risk of solid insulating materials and finished electronic products by applying a standardized electrically heated glow wire onto test

Brand Name:KINGPO

Place of Origin:Mainland China

...Glow Wire Thermocouple Flammability Testing Equipment 1.Product information: Imported with original packaging insulation high temperature resistance armour thermocouple,0.5mm type K, armour heat-resisting1100℃(is superior to the standard 1050℃) 2.Deal board: Use deal board of 20cm*20cm for glow wire testing...

Brand Name:HUST Tony

Model Number:HTB-007

Place of Origin:china

Glow Wire Testing Chamber comply with IEC60695-2-10 -13:IEC 60335-1,IEC 60598-1 and IEC60745 Features: 1.0 They system comply with standards of IEC60695-2-10 :2013 ～ IEC60695-2-13 :2013,IEC 60335-1,IEC 60598-1 and IEC60745. 2.0 Glow wire material: Ni/Cr wire with 4 mm diameter 3.0 Temperature range: 50 ℃ ～ 960 ℃ 4.0 Current range: 0-200 Ampere 5.0 Input power: 220V/50Hz 6.0 Including thermocouple and 1℃ resolution display to monitor the wire

Brand Name:Haida

Model Number:6004-HD

Place of Origin:China

...Wire Ignition Tester Product Description This tester simulates fire hazards as specified in IEC 60695-2-20, UL 60950, IEC 60950-1999, and ASTM D3874-1997. It employs a heating wire of specific dimensions (0.5mm × 250mm) and material (Ni80/Cr20), pre-annealed at a defined power (0.26W/mm) and duration (8-12 seconds). The wire is wound in five full turns around the sample at a 6mm pitch, then tested at the same power (0.26W/mm) until ignition

Brand Name:Sinuo

Model Number:SN772

Place of Origin:China

... index (GWFI) test method for materials” IEC60695-2-13 “Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials” IEC60695-2-10 “Fire hazard testing - Part 2-10:

Brand Name:kingpo

Model Number:KP-GWT01

Place of Origin:china

Glow Wire Tester , glow wire tester without test chamber , IEC 60695-2-10 Glow Wire Tester Introduction Glow wire test is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695-2-10,UL 746A .It makes required material(＞77%Ni/20±1%Cr) and heating wire in required shape(Φ4mm-chromel-filament)heated up to test...

Brand Name:JIEDONG

Model Number:JD-3052

Place of Origin:Guangdong, China

...Wire Bending Glow Wire Test Equipment Glow wire testing machine JD-3052 product description: The glow wire tester heats the specified material (Ni80/Cr20) and the shape of the heating wire (Φ4mm nickel-chromium wire) to the test temperature (550°C to 960°C) for 1 minute, and then burns at a specified pressure (1.0N). The hot test sample is 30s, and the ignition...

Brand Name:HAIDA

Model Number:6001-HD

Place of Origin:Guangdong, China (Mainland)

... stress caused by a glowing element, overloaded resistor, or similar heat or ignition source over a short period. It is used to assess the fire hazard risk using simulation techniques. This test applies to electrical and electronic products, components,

Brand Name:LIYI

Model Number:LY-ZRS

Place of Origin:China

...Glow-wire Test Machine for Electronic Components Usage: Glow-wire Test Apparatus is according to IEC60695-2-1 and 2-10 and Glow wire tester is to test glow wire of lighting lamps, electronic products and household appliances, testing methods of Glow wire, basic testing methods of Glow wire device> and UL 746A, IEC829, DIN695, VDE0471, the Glow wire...

Place of Origin:China

Brand Name:KeRang

Glow Wire Tester GW-1 Standard:IEC60695-2-10, IEC60695-2-13 and UL746A. Application:This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in a short time. It is suitable for electric and electronic products, household appliances and other material to do fire hazard testing. It is also used in the No flame ignition source fire test to test...

Brand Name:ZL

Model Number:ZL-3029

Place of Origin:CHINA

Glow Wire Test Chamber For Electrician And Electronics Fire Hazard Testing Of Products Application The device is designed and manufactured according to the requirements of "glow-wire test method" in IEC60695-2-10:2000, GB/T5169.10-2006, GB/T5169.13-2006 and GB4706.1 standards. It is suitable for electrician and electronics fire hazard testing of products, appliances and their materials to simulate thermal stress caused by heat sources or ignition

Brand Name:HOOHA

Model Number:ZY6112 UL1666

Place of Origin:China

...Glow Wire Test Apparatus Vertical Pipe Vertical Combustion Testing Scope of application: It is suitable for the evaluation of the combustion performance of the wiring and elevator in the piping between the building and the floor. Meet the standard: UL1666>. Main features: Components: The burner consists of a 1/2inch steel pipe, a 1/2inch tube elbow and a steel ignition dispersion disk. Test...

Brand Name:HOOHA

Model Number:ZY6112 UL1666

Place of Origin:Guangdong

...Glow Wire Test Apparatus Vertical Pipe Vertical Combustion Testing Scope of application: It is suitable for the evaluation of the combustion performance of the wiring and elevator in the piping between the building and the floor. Meet the standard: UL1666>. Main features: Components: The burner consists of a 1/2inch steel pipe, a 1/2inch tube elbow and a steel ignition dispersion disk. Test...

Brand Name:LONROY

Place of Origin:Guangdong, China

... Temperature Testing equipment Test Standard IEC 60695-2-10/11/12/13, IEC 60884-1, GB2099.1, IEC 60335-1, GB4706.1, VDE0620. Glow Wire Test Apparatus/Glow wire test chamber/Glow Wire Flammability Temperature Testing equipment Technical specifications This

Brand Name:GESTER

Model Number:GT-MC35H-1

Place of Origin:China

...-screen controller and instrument. New test circuit, stable performance, reliable, simple and easy to operate. wide range of parameter adjustment. The Glow Wire Tester is apply to the latest test standards IEC60695,GB5169, etc. Glow wire test Standards:

Brand Name:lixian

Model Number:HZ-7046

Place of Origin:China

...Glow Wire Tester Equipment Hot Into The Depth 7mm + 0.5mm (Adjustable) Precision Class: 0.5 Glow Wire Tester Equipment summary: The glow wire test apparatus using test box part and control part integration design, convenient installation and commissioning on site. Test case and an important component of the stainless steel manufacturing, high smoke, gas corrosion; regulator manually adjust the current test...