fire safety analysis flame test chamber

Brand Name:Sinuo

Model Number:SN773A

Place of Origin:China

... result from fault conditions, in order to assess the fire hazard by a simulation technique. The results of this test may be used as elements of a fire hazard assessment which takes into account all of the factors which are pertinent to an assessment of

Brand Name:vouch

Model Number:5330

Place of Origin:CHINA

Vertical Flame Test Chamber of Textile products MODEL:5330 It is mainly used for the determination of flame retardant performance of clothing fabric, decorative fabric, tent fabric, rubber, plastic, curtain, building material and other materials with flame...

Brand Name:AI

Model Number:VW-N

Place of Origin:China

... near by of cable or flexible wire when it caught fire.The whole test is carried out in a sealed test chamber with a volume of 4.54m³. Main advantages 1, The vertical flame test chamber is electrolytic plate electrostatic spraying, elegant appearance,

Brand Name:Sinuo

Model Number:SN771

Place of Origin:China

...Flame Test Chamber Complied Standards & Clauses UL 94 “Tests for Flammability of Plastic Materials for Parts in Devices and Appliances” IEC 60695-11-3 “Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods” IEC 60695-11-10 “Fire hazard testing -- Part 11-10: Test flames -- 50 W horizontal and vertical flame test methods” IEC 60695-11-20 “Fire...

Brand Name:HeJin

Model Number:NF-2

Place of Origin:China

Flame Test Chamber Needle-Flame Test Apparatus PLC Control 4mm Coper Block Standard: IEC 60695-11-5 Fire hazard testing – Part 11 -5: Test flames – Needle-flame test method – Apparatus, confirmatory test arrangement and guidance. Application: The Needle-Flame Test Apparatus to simulate the effect of a small flame which may result from fault conditions, in order to assess by a simulation technique the fire...

Brand Name:Gold

Model Number:GD-JASOD612

Place of Origin:China

...wall insulation for automobiles, keep cables under fire conditions until flaming, and self-extinguish after the flame is removed within 15s. Standards: · JASO D 618-2008 Low-tension cables with thin wall insulation for automobiles Technical parameters: ·

Brand Name:HOOHA

Model Number:ZY6239

Place of Origin:China

...surface of the combustible substrate is tested, and it is also applicable to the determination of the flame resistance time of the flamefaced fire retardant coating Meet the standard: GB/T12441-2005 (appendix A) Main parameters: 1. The structure of this

Brand Name:SKYLINE

Model Number:SL-F11

Place of Origin:China

IEC 60695 Needle Flame Test Chamber Electronic Product Flame Test Apparatus, IEC 60695 Needle Flame Test Chamber Introduction The Needle Flame Test Chamber evaluates fire resistance caused by internal faults such as leakage current in cables, wires, and ...

Brand Name:HOOHA

Model Number:HH52016

Place of Origin:Guangdong

... flame test chamber is suitable for test and determination of low-tension cables with thin wall insulation for automobiles, keep cables under fire conditions until flaming, and self-extinguish after the flame is removed within 15s Standard: • JASO D

Brand Name:MENTEK

Model Number:MHG-125L

Place of Origin:China

... energy saving design, noise reduction and fire resistant technology, can ensure the safety of colleagues in quiet and efficient work.My company has twenty years experience specializing in the production of test chamber, we have a professional team, from

Brand Name:Delta

Model Number:UL94

Place of Origin:China

UL94-X IEC60695-11 Horizontal and Vertical Flame Test Chamber Introduction: UL94-X Horizontal and Vertical Flame Test Chamber is widely applied throughout the industry, especially in electrical manufacturing, where it is widely used to test electrical ...

Brand Name:KINGPO

...t tilts with the angel of 45°and provide it with butane gas. The fire hazard of the equipment when there is flammule inside the equipment that caused due to the fault condition is assessed by whether the specimen can be ignited or the combustion time and

Brand Name:YUYANG

Model Number:YY164

Place of Origin:China

....15; GB/T5169.16; GB/T5169.17 (IEC60950-11-10), UL 94 and other standards. The horizontal and vertical testing machine uses a Bunsen burner of a specified size and a specific gas source (methane or natural gas) to ignite a number of samples in a

Brand Name:YUYANG

Model Number:YYB001

Place of Origin:China

...Testing Machine Flame Test Chamber Flammability Tester For Plastic DONGGUAN YUYANG INSTRUMENT CO.,LTD is Located in Wanjiang District (Dongguan City, Guangdong Province,China),a famous historical town with prosperous industry and convenient transportation. We are a high-tech enterprise which is specialized in developing and manufacturing Fire Testing Equipment, Building Material Fire...

Brand Name:DAXIAN

Model Number:DX8221

Place of Origin:China

Fire Safety Helmet Flame Retardant Performance Tester​ Scope of application: It is widely used in safety helmet production enterprises, major quality inspection units and construction engineering testing stations. Performance characteristics: 1. Electronic ignition; automatic timing positioning of burner. 2. Ignition time: 0-999.9 seconds, arbitrary setting, afterburning time, smoldering time are automatically recorded, digital display. 3. Flame

Brand Name:Haida

Model Number:6040-HD

Place of Origin:China

Product Overview: The HAIDA 6042-HD is a professional laboratory-scale testing system designed to evaluate the flammability characteristics of fabric-core and steel-cord conveyor belts. Using propane gas burners, it provides reliable combustion performance...

Brand Name:Kinte

Model Number:WH-8920(UL94)

Place of Origin:Guangdong,China (Mainland)

.... Scope of application: The combustion testing machine is mainly used for plastic or film in the direct combustion of the fire under the determination of non-flammable properties of plastics. (HB, V, VMT), the device has the advantages of accuracy,

Brand Name:kingpo

Model Number:KP-FT06

Place of Origin:china

... 4.6.2, Annex A.3. It is used to simulate that the flammable liquids used in electrical and electronic equipment may ignite due to overheating and leak out of the fire protection enclosure, causing electrical fires and endangering the reliable operation of

Brand Name:Infinity Machine

Model Number:RS-8224

Place of Origin:Made in China

... of Plastic Material Specified for Manufacturing Equipment and Parts, GB/T2408-1996 Testing Method of Burning of Plastic Material: horizontal and vertical as well as the relevant clauses in IEC60065 for a purpose of testing the burning characteristics of

Brand Name:PEGO

Model Number:HVR-4

Place of Origin:China

...-11-4 and IEC60695-11-3. The fire hazard is evaluated by burning rate, after glow time, after flame time and damage length of the specimen. HVR-4 horizontal and vertical flame test apparatus is applied to the V-0, V-1, V-2, HB and 5V materials, it is