electric ignition flash point testing equipment

Brand Name:HTI

Model Number:HTB-047

Place of Origin:Guangdong,China(Mainland)

...Flash Point Testing Equipment ISO 2719 ASTM D93 Description: The flash point of a volatile material is the lowest temperature at which it can vaporize to form an ignitable mixture in air. Measuring a flash point requires an ignition source. At the flash point, the vapor may cease to burn when the ignition source is removed. This automatically closed flash point tester, used to measure open and closed flash point...

Brand Name:GDZX

Model Number:ZX-BS

Place of Origin:China

...Heating: follows ASTM D93, GB/T261-2008A required temperature rising curve. 2. Automatic ignition, cooling, printing and display the testing results 3. Accurate measuring, good repeatability and stable performance, easy operation. Technical Indicators 1.

Brand Name:YUYANG

Model Number:YY120

Place of Origin:China

...Flash Point Testing Equipment Description: This instrument is designed according the standards GB/T3536-2008 Test Method for Flash Point and Fire Point of Petroleum Products - Cleveland Open Cup Method, ASTM D92 and ISO 2592. It is applies to determine the flash point and fire point of petroleum products which the flash points higher than 79°C except fuel oils. Standards: GB/T3536-2008 Test

Brand Name:Lonroy

Model Number:BGD 235/238

Place of Origin:China

...Flash Point Testing Equipment 600W Paint Testing Equipment BGD 236 Automatic Flash Point Tester 1.Description Fully automatic flash point measuring instrument, compared with the manual instrument, the following features are added: * The instrument is built-in atmospheric pressure sensor, the pressure is automatically corrected, no need to set the atmospheric pressure value artificially. * The flash...

Brand Name:ZL

Model Number:ZL-1025A

Place of Origin:China

...IP36 3.Professional supplier Equipment overview: Cleveland open cup flash point test equipment is applicable for determining measurement of flash-points and burning-points of petroleum products (the Cleveland open cup method) except petroleum products with

Brand Name:Shengtai Instrument

Model Number:SK107

Place of Origin:China

SK107 fully automatic closed flash point tester, domestically produced sensor, atmospheric pressure calibration SK107 is a fully automatic closed-cup flash point tester, which is developed by centralized surgery. The instrument adopts microcomputer ...

Brand Name:Shengtai Instrument

Model Number:SH105B

Place of Origin:CHINA

SH105B automatic closed cup flash point tester is designed and manufactured as per standards GB/T261Determination of Flash Point - Pesky-Martens closed cup method and ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester. It...

Brand Name:HOOHA

Place of Origin:China

Description: This instrument is designed according the standards GB/T3536-2008 Test Method for Flash Point and Fire Point of Petroleum Products - Cleveland Open Cup Method, ASTM D92 and ISO 2592. It is applies to determine the flash point and fire point...

Brand Name:Advanced Instruments

Model Number:PMCC-M

Place of Origin:China

Product Description ASTM D93 Closed Cup Flash Point Tester is designed and made as per the National Standard of People's Republic of China GB/T261-2008 "Test Methods for Flash Point of Petroleum Products by Pensky-Martens Closed Cup Method". ...

Brand Name:GLO

Model Number:GLO-KS9000

Place of Origin:China

Product Overview: The fully automatic flash point tester is a professional detection instrument used to measure the flash point of flammable liquids (such as petroleum products, chemical raw materials, lubricants, etc.). The "flash point" refers to the ...

Brand Name:HeJin

Model Number:HAI-1

Place of Origin:China

...Current Arc Ignition Tester Flammability Testing Equipment 33A Arc Burning Test Product Introduction: As the source manufacturer, HJ Company launched the HAI-1 High Current Arc Ignition Tester, which is designed for electrical and electronic, automotive...

Model Number:FGW

...ignition tester,safety test equipment Model FGW: Glow wire ignition tester,safety test equipment Glow wire ignition tester,safety test equipment is designed to test the resistance to fire of insulating parts. It assesses the susceptibility of electrical insulating materials to ignition as a result of exposure to a glowing wire.This test method determines the minimum temperature required to ignite...

Brand Name:Sinuo

Model Number:SN778

Place of Origin:China

...Ignition Coil Test Method Apparatus Complied Standards & Clauses IEC60695-2-20 “Fire hazard testing - Part 2: Glowing/Hot wire based test methods - Section 20: Hot-wire coil ignitability test on materials” Equipment Overview Application: Suitable for fire hazard tests on solid electrical insulating materias of information technology equipment, low-voltage switchgear and control equipment...

Brand Name:SKYLINE

Model Number:SL-F60B

Place of Origin:Dongguan, China

Fabric Surface Resistivity Tester EN 1149-1/ EN 1149-2 AATCC 76 Introduction This instrument can be used to measure the anti-static clothing, protective clothing of various fabrics, carpets, films and other insulating materials protective clothing surface ...

Place of Origin:China

Brand Name:KeRang

Electric Wire And Cable Burning Test Chamber Feature: Using integral intake automatic ignition system, combustion time delay only 0.1s to ensure that the full combustion of the gas. Using PLC intelligent control system, touch screen operation interface...

Brand Name:SAMYON

Model Number:SY-261D

Place of Origin:CN

...Flash Point Tester Application: It is used to make determination of the closed cup flash point of the petroleum products by Pensky-Martens Closed Cup method. Standard: ASTM D93 Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester GB/T 261-2008 Determination of Flash Point - Pensky-Martens Closed Cup Method Parameters: Item Name Details 1 Igniting device Electric ignition. igniter

Brand Name:Btutest

Model Number:LHYT-0633

Place of Origin:Made in China

...Flash And Fire Point Tester Asphalt Testing Equipment Standard: ASTM D92 AASHTO T48 NF T60-118 ISO 2592 IP 36 EN 22592 Description: This instrument is suitable for Cleveland Open Cup (COC) to determine the flash point and ignition point of viscous petroleum asphalt, coal asphalt and liquid petroleum asphalt materials with flash point above 79 ℃ to evaluate the construction safety Asphalt Testing Equipment...

Brand Name:SHUOBODA

Model Number:BD-D92-001Z

Place of Origin:China

... and kindling temperature of oil products. (except fuel oil and oil products with open cup flash point lower than 79℃) The test is automatized in the whole process: auto-striking, auto-igniting, and auto examining. According to the applied codes, the

Place of Origin:China

Brand Name:HongCe

Model Number:HWI-1

...Equipment IEC60695 Hot Wire Ignition Tester , HWI Test Equipment Product information: This tester conforms to the standard requirement of IEC60695-2-20. It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time. Hot-wire coil ignition test

Brand Name:KINGPO

...Test Equipment HWI Hot Ignition Wire Tester IEC60695 Flammability Testing Equipment HWI Hot Wire Ignition Tester Lab Equipment IEC60695 Hot Wire Ignition Tester , HWI Test Equipment Product information: This tester conforms to the standard requirement of IEC60695-2-20. It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition