distance measurement needle flame test gauge

Brand Name:vouch

Model Number:5600

Place of Origin:CHINA

...Measurement Needle Flame Test Apparatus Standard IEC60695 Fire Hazard Testing Automatic Instrument The Needle Flame Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. The Needle Flame Tester consists of a diameter of 0.9mm needle burner that tilts to 45degree from the vertical and is fueled with butane gas. The test...

Brand Name:kingpo

Model Number:IEC 60695-11-5 Figure A.3

Place of Origin:china

IEC 60695-11-5 Gauge to measure flame height and the distancebetween burner and copper block, Needle flame test

Brand Name:Haida

Model Number:6010-HD

Place of Origin:China

... test instruments. During measurement, the copper block is positioned 6±0.5mm above the needle flame burner. The flame is ignited, and the time required for the copper block temperature to rise from 100°C±5°C to 700°C±3°C must be within 23.5±1.0

Brand Name:PEGO GROUP

Model Number:NF-1H

Place of Origin:China

... degree from the vertical and is fueled with butane gas. The fire hazard of the specimen is assessed by measuring the burning duration of the specimen, and any ignition of the wrapping tissue and white pine board below the specimen. Needle flame tester is

Brand Name:YUYANG

Model Number:YY709

Place of Origin:China

Wire and Cable Smoke Density Tester, IEC61034 Cable Tester and Wire Tracker Product description: Test the smoke density of the wires and cables Test index: Optical density(OD) and specific optical density(DS) of the smoke Measuring principle: Lambert-beer ...

Brand Name:Sinuo

Model Number:SN773

Place of Origin:China

Needle Flame Tester Electronic Steel Testing For Fire Hazard Measurement IEC 62368-1 Product information: The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts with the angel of 45°and provide it with butane gas. The fire hazard of ...

Brand Name:KINGPO

Model Number:NF-1

Place of Origin:Mainland China

Needle Flammability Test Equipment Needle Flame Tester Product Introduction The test machine is designed and manufactured according to the requirements of the relevant standards IEC60695-11-5, the needle-flame tester is the special instrument used for the fire hazard test of the small flame caused by the fault conditions in the simulating technology assessment equipment. It is applicable to the measurement...

Brand Name:HongCe

Model Number:CK-5

Place of Origin:China

...,IEC60335-2-9 clause 29,and IEC60335-1 Clause 29 etc. They are used to determine the shortest path between two conductive parts, or between a conductive part and the bounding surface of the equipment, measured along the

Brand Name:HOOHA

Place of Origin:China

...spread of flame,flame condition of ignition at multiple distances,critical flux,and total heat release value.It can also measure the burning characteristics of vertical specimen.After recording time of ignition and extinguishment at each distance,we can

Brand Name:HTI

Model Number:HTB-025

Place of Origin:Guangdong,China(Mainland)

...Flame Testing Equipment Standards ISO 5658-2 ASTM E 1321 Description: It’s suitable to evaluate burning characteristics of construction materials and measure the spread of flame,flame condition of ignition at multiple distances,critical flux,and total heat release value.It can also measure the burning characteristics of vertical specimen.After recording time of ignition and extinguishment at each distance...

Place of Origin:Guangdong, China (Mainland)

Brand Name:AFK

Model Number:YC-100H

Double Needle Double Pipe Differential Stainless Steel Case Pressure Gauge Diameter: 100 mm Stainless steel case and internals Accuracy: 1.5% Measuring range:Min. low 0-0.16--10Mpa Protect Class: IP65 Working Medium Temperature : 80 Degrees Celsius Working...

Brand Name:HUATEC

Model Number:LX-C

Place of Origin:CHINA

Detailed Product Description Accurate handheld design peak hold type durometer LX-C-2 twin needle, high precision shore durometer Function: LX-C-2 measured compression rate of 50% when stress for 0.5kg/c ㎡above contains a foaming made of rubber microporous...

Brand Name:SHC

Model Number:SC-GWAC

Place of Origin:China

...Testing Equipment Accessories 1.Flame height gauge Material: thickness of 1-1.5mm stainless steel, IEC606095-11-4 picture 2, IEC606095-11-3 picture 2. Deal board Copper block Platinum pole Flame height gauge Use deal board of 20cm*20cm for glow wire testing Horizontal-vertical tester, needle flame tester dedicated thermometry copperΦ5.5,1.76g(50W)/Φ9,10g(500W)/4*6,0.58g(needle flame...

Brand Name:DAXIAN

Model Number:DX8651

Place of Origin:China

... the spread of flame,flame condition of ignition at multiple distances,critical flux,and total heat release value.It can also measure the burning characteristics of vertical specimen.After recording time of ignition and extinguishment at each distance,we

Brand Name:Cencho

Model Number:1/8”~1”

Place of Origin:Hebei, China

...Needle Valve 1. SS needle valve is a kind of valve that can be adjusted accurately. SS needle valve has a wide range of uses. For example, the cutting distance used for flame cutting, the knob for adjusting flame temperature is SS needle valve. 2. The SS needle valve of instrument is an important part of instrument measurement pipeline system. The SS needle...

Brand Name:Sinuo

Model Number:SN7712

Place of Origin:China

Consumables for Flammability Testing Equipment Complied Standards & Clauses The consumables are for various of flammability test chambers, such as glow wire test apparatus, needle-flame test apparatus, tracking leakage test apparatus, horizontal and ...

Brand Name:GOLD

Model Number:GD-ISO5658

Place of Origin:China

...Flame Spread Test Machine with ISO 5658 Introduction: IMO thermal radiation flame propagation tester is used for the combustion characteristics of building materials, high-speed train materials, and ship materials, and measures the flame spread speed, ignition heat, and total heat release according to distance and CEF (critical thermal radiation flux). This test...

Place of Origin:Zhejiang China

Needle valve is a valve that can be accurately adjusted, with a wide range of uses, such as the cutting distance for flame cutting, adjusting the flame temperature knob is needle valve. Instrument needle valve is an important part of the instrument measurement...

Brand Name:AI

Model Number:SFT

Place of Origin:CHINA

... spread rate of flame, flame for ignition by distances, CFE (Critical Flux at Extinguishment) and total heat release. This test method is originated from ISO 5658-2 (Reaction to fire tests Spread of flame- Part 2 Lateral spread on building products in

Brand Name:I-SUNTOP

Model Number:XL-313B/C

Place of Origin:china

... requirement, Application range:It is designed to measure the insulation thickness of the measuring wire.It is desktop-type, the scale is bolted to the base, and it is not required to carry the hand. The needle fixture is also accurate for the test of the