dc 4ghz rf dummy load

Brand Name:Vinncom

Model Number:VN-LD-4G-100W-ONM

Place of Origin:China

DC-4GHz 100W Dummy Load /Termination Load Good VSWR Wide band DC-4000 ROHS Compliance Part Number VN-LD-4G-100W-ONM Operating Frequency ( MHz ) DC-4000 Impedance ( Ohm ) 50 VSWR ≤1.25 Application Indoor&Outdoor Operating Temperature ( ℃ ) -40 ~ + 80 ...

Brand Name:Vinncom

Model Number:VN-LD-4G-100W-ONM

Place of Origin:CHINA

...4GHz RF Dummy Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load

Brand Name:ZD

Model Number:ZD-DL-3GHz-300W-NF

Place of Origin:China

DC-3GHz 300 W N Female Connector Coaxial RF Dummy Load with 50 Ohm RF dummy load introduction: N male RoHS Aluminium black oxide dc 3GHz 5W 50 ohm RF dummy load is a device used to simulate an electrical load during testing. In an RF System a dummy load is used to simulate an antenna. By using a dummy load instead of an actual antenna, the transceiver can be tested and configured without radiating radio waves. N male RoHS Aluminium black oxide dc

Brand Name:YLT

Model Number:chip

Place of Origin:China

...DC- 4GHz BeO AlN Al2O3 6.35 * 6.5 1. We supply various electronic components and welcome your inquiry 2. Recovery of electronic components 3. Sincerely look forward to your cooperation! Flange Termination 100watt 50ohm RF Termination Microwave Resistor High Power Dummy Load Used and refurbished 100% DC Resistance Check Tested MILITARY/INSTRUMENTATION RESISTIVE COMPONENTS Features: • DC...

Categories:RF Termination Load

Country/Region:china

FEATURES: ★Wide frequency band, wide coverage. ★PIM optimized design. ★Ideal for all kind of IBS/DAS/PDAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications Frequency Range(MHz) DC-6000 VSWR ≤...

Brand Name:ELT

Model Number:K-JR-0.5W

Place of Origin:Shaanxi, China

RF Load 0.5 Watts DC-40GHz K(2.92mm) Male VSWR ≤ 1.3 Chip Resistor RF load/termination (also known as a dummy load) from Xi'an Elite Electronic is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, etc. Our coaxial radio requency load termination is manufactured in a RF load design. The low-power matched RF load

Place of Origin:changzhou

Brand Name:XINLIANFENGYUAN

Model Number:AC-190

F Male Terminator, RF Dummy Load 1. Low cost 2. ISO 9001 & TS 16949 certified 3. RoHS & REACH compliance 4. Made in China Features: Excellent insertion/withdrawal ...

Brand Name:ZSX

Model Number:BNC-JK

Place of Origin:China

Nickel-plated Brass RF Adapter BNC Male To Female Connector BNC-JK is a 50Ω straight BNC female to BNC female RF adapter with bayonet locking for fast and secure connection. It features brass body, nickel-plated shell and gold-plated contacts, ensuring low...

Place of Origin:Sichuan, China

Brand Name:Sinoscite

Model Number:SNSD

Waveguide Aluminum Material Silver-plated Matched Load Components Quick Details Place of Origin:Sichuan, China Brand Name:sinoscite, Microwave Material:Aluminum material, silver-plating Applications:Microwave test Characteristic:Compact, full bandwidth, ...

Model Number:ZCT-50RN-18T

Place of Origin:Chengdu,China

Brand Name:Zysen

50W DC-18GHz N connector Coaxial Termination ​ DC-4GHz, 8GHz,12.4GHz,18GHz are available with N, SMA connector . Zysen also offer a series Coaxial Termination frequency up to 67GHz , Power handling from 0.5 to 2000watts,connector SMA,N, 2.92mm or chip, ...

Brand Name:LENOLINK

Model Number:LD10-DIN

Place of Origin:CHINA

... termination to properly terminate the output port of a device or to terminate one end of an RF cable. Lenolink Termination loads are characterized by low VSWR, high power capacity and performance stability. Widely used for GMS/DCS/UMTS/WIFI/WIMAX etc.

Brand Name:DALEE

Model Number:DL50011209

Place of Origin:Guangdong,China(Mainland)

...RF Connectors 1-4 generation 100 watt dummy load with gold flash Product Details: Product name: DALEE RF Connector Secification: 1-4 generation Type : Female Certification: ISO9001,UL,ROHS and the latest REACH Voltage Rating: 60 VAC Operating Temprature: -40℃ - +85 ℃ Nominal Characteristic Impedance: 50 ohm Applicable Frequency: DC~6 GHz Vspr: 1.3 MAX.(DC...

Brand Name:ZENITHSUN

Model Number:DRLB

Place of Origin:China

50kW 650V-1000V,DC Portable Variable Resistive Dummy Load Banks Cabinet Structure 1.An assembly-type enclosure contains DR series or DQ series or AS series or other high power rating ...

Place of Origin:China

Brand Name:BONENS

Model Number:RIG

RIG RF resistor flange mount 100 ohms 50ohms dummy load resistor Custom designs available RF Attenuators and RF Resistors and RF Terminations. Product Description The following are the commonly used sizes, we can also customize the size according to your ...

Model Number:BNC-KWE

...RF Connectors High-quality PCB mount RF connectors featuring four BNC female connectors arranged in two rows, designed for reliable RF applications. Application RF Type BNC Contact Material Phosphor Bronze Housing Material Brass Model Number BNC-k Product Name BNC Type RF Coaxial Connector Impedance 75 Ohms Frequency Range DC-4GHz...

Categories:RF Interconnects

Country/Region:china

...RF Adapters - Between Series BNC PLUG TO SMA JACK VSWR:1.3MAX DC-4GHz Manufacturer: Amphenol Product Category: RF Adapters - Between Series RoHS: Details REACH - SVHC: Details Side 1 RF Series: SMA Side 1 Gender: Jack (Female) Side 2 RF Series: BNC Side 2 Gender: Plug Maximum Frequency: 4 GHz Impedance: 50 Ohms Adapter Style: Straight Shell Plating: Nickel Body Material: Brass Contact Plating: Gold Packaging: Bulk Brand: Amphenol RF

Brand Name:Sinrui

Model Number:BNC-50J3

Place of Origin:China

Products Name: DC 4GHz RF BNC 50 Ohm Male straight coaxial Connector Panel Mounting with cable Products Descrption: BNC connectors have a bayonet-...

Place of Origin:Hebei,China

Brand Name:Triumph Load

Model Number:48V 200A battery test dummy load bank

Introduction 48V 200A battery test dummy load bank (namely battery discharger, battery load bank, battery discharge tester), is designed for the capacity test and maintenance of continuous battery sets through intensive discharging. The unit features in ...

Brand Name:Terui

Model Number:SMA-50JRN-50JR-18A

Place of Origin:China

RF Coaxial Terminations SMA RF Termination Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or ...

Brand Name:Lihua Motor/ HCS Motor

Model Number:RF-130

Place of Origin:Dongguan,China

... Shaft Length: L±0.5 (customizable) Mounting Hole Spacing: 10.2 mm / 13.2 mm / 15.8 mm Mounting: M*0.4 Model Voltage(V) No Load Rated Load Stall Range Rated Speed Current Torque Speed Current Output Torque Current R/min A m.Nm R/min A W