cnas cold bending test device

Brand Name:SKYLINE

Place of Origin:China

...test whether the wire or rope lamp has cracks when it is wound at low temperature. The lamp is wound on the appliance shown in Figure 2, with a winding diameter of 4-5 times its own ...

Brand Name:HongCe

Model Number:HDX1307

Place of Origin:China

... bending performance of wire and cable at low temperature. The equipment is mainly composed of low temperature thermostat, winding device and material testing system. It is suitable for circular wire and cable with outer diameter less than or equal to

Brand Name:Pego Electronics

Model Number:PG-CBT

Place of Origin:China

... clause 8.1 and figure 1, IEC60884-1, VDE0472, GB2951.4 and GB2099-94, for bending test at low temperature for insulation of cable. The cold bend test is applied to the cores of circular cross-section having an external diameter up to and including 12.5mm,

Brand Name:KingPo

Place of Origin:China

... test of the circular insulation wire core whose diameter is small and the sector-shaped insulation wire core which can not be used for dumbbell. The apparatus shall be held in a refrigerator before and during the test. The diameter of the mandrel shall be

Brand Name:Sinuo

Model Number:SN2307

Place of Origin:China

Cold Bend Test Apparatus For Cables ≤Ø 12.5mm IEC60811-1-4 Clause 8.1 And 8.2 Product description: This device is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a major axis dimension up to and including 20 mm. According to the standard IEC60811-1-4 clause 8.1 and 8.2, common test...

Brand Name:HeJin

Model Number:HDX1307

Place of Origin:China

... Methods for general application-Test at low temperature clause 8.1 and 8.2 and figure 1. Figure 1 Cold Bend Test Apparatus Application: This test is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a

Brand Name:AI

Model Number:AIC22170

Place of Origin:China

...bending test device is used to detect optical fiber cables to withstand repeated bending capability, which meets the test requirements to optical cable of method E6. Adopt reciprocating motion structure, completely eliminate the possibility of emergence lock, swing arms are smooth and low noise. Non-contact sensor detects repetitive bending times that avoid abrasions to devices...

Brand Name:CHENGFENG

Model Number:CF9069

Place of Origin:China

..., meters, components and other electrical and electronic products under high and low temperature environments. It can be used for testing in various scientific research institutions and factory and mine central laboratories. This testing machine is

Place of Origin:China

Brand Name:KeRang

Cold Bending Test Machine HDX1307 Standard:IEC60811-1-4 clause 8.1 and 8.2, common test methods for insulating and sheathing materials of electric and optical cables-part 1-4:Methods for general application-Test at low temperature. Application:This test is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a major axis dimension up to and including 20 mm. Test...

Brand Name:DAXIAN

Model Number:DX8393

Place of Origin:China

DX8393 Wire and Cable Two Three Wheel Bending Testing Equipment 1, Applicable scope: Mainly suitable for measuring the mechanical strength of PVC insulated cables or rubber insulated and extra flexible wires with a rated voltage of 450/750V or below, and ...

Brand Name:ZL

Model Number:ZL-7039

Place of Origin:China

... Leather Testing Machine, is designed for comprehensive testing of shoe soles and finished footwear. This equipment evaluates bending resistance and identifies cracking locations to enhance product quality. Key Features Tests resistance to bending of

Brand Name:LONROY

Place of Origin:Guangdong, China

... Test Device Metal Wire Repeated Bend Performance Tester Product Description Product Description This machine is primarily used for repeated bending tests of metal wires to examine their performance under repeated plastic deformation and to identify any

Brand Name:Gaoxin

Model Number:GX-5010

Place of Origin:Guangdong,China

... for the cold weather resistance test of soles, rubber and plastic products of shoe and synthetic leather to understand the adaptive capacity to cold weather. The inner testing box can install various bending fixtures. The machine use stainless steel for

Model Number:UP-4009

Brand Name:YOUBI

Place of Origin:CHINA

...Testing Machine ISO 5423 Rubber Cold Bending Resistance Tester Product Introduction The UP-4009 Low Temperature Flexing Testing Machine features a vertical design that eliminates the need to bend over when gripping specimens, making operation more convenient and user-friendly. This machine is used to test...

Brand Name:JIEDONG

Model Number:JD-3006

Place of Origin:Guangdong, China

... test with headphone cable, USB cable, power cord, etc. The product to be tested is fixed to the test fixture and a certain load is applied. The wire is fixed on the swing arm of the device and the wire is at an angle of 45° to the terminal. The number of

Brand Name:HTI

Model Number:HTX-060

Place of Origin:Guangdong,China(mainland)

... leather and other materials or finished products, and to understand the situation of materials or finished products to adapt to cold climate or cold regions. Standard: ASTM-D1790, D1593, JIS-K6545, the HB-T2877 Specification: Temperature range: -50 ° C

Model Number:GD-EN 511

Brand Name:GOLD

Place of Origin:China

.... This device tests the temperature drop value when gloves come into contact with cold surfaces, enabling calculation of glove thermal resistance. It is primarily used to evaluate gloves' ability to resist hand heat loss and ...

Brand Name:Dongjun

Model Number:DJ-DZ-398

Place of Origin:Dongguan, China

... wires, cables and metal wires. It simulates the repeated bending scenarios that wires may encounter during installation, use and transportation, with adjustable bending angle, speed and number of cycles. The equipment clamps one end of the wire firmly and

Brand Name:wangtebei

Model Number:GW-50

Place of Origin:China

GW- 50mm Bending Test Equipment for Metal Application: This testing machine can be used to do cold bend and rebend test on plane. This machine is suitable for bend test of the metallic material -rods and bars, the plate, spiral steel, and widely applies...

Brand Name:Liyi

Model Number:LYH-300D,LYH-600D,LYH-1000D,LYH-2000D

Place of Origin:Guangdong, China

...Testing Machine Metal Universal 300kn Tensile Test Device Product Description 1. Liyi hydraulic universal testing machine is mainly used to execute the tension, compression, bending, shearing etc. Test for metal materials. Attached simple accessories and devices...