astm d1929 ignition temperature test apparatus

Brand Name:YUYANG

Model Number:YYF002

Place of Origin:China

ASTM D1929 Ignition Temperature Testing Equipment For Plastic Sample Intruduction Plastic ignition temperature tester according to GB4610-2008 plastic hot air furnace method of determining the ignition temperature plastic ignition temperature tester design and manufacture, in full compliance with GB4610-2008, while meeting the requirements of ISO871-2006 standards, used to assist in testing...

Brand Name:DAXIAN

Model Number:DX1012

Place of Origin:China

... ignition temperature and spontaneous ignition temperature of plastics using a hot-air furnace. Standards: - ISO 871 - ASTM D 1929 - GB/T 4610 - GB/T 9343 Specification: Temperature of copper furnace: - Can be constant between 150~450 ℃ ; - Equipped with

Brand Name:HTI

Model Number:HTB-016

Place of Origin:Guangdong,China(Mainland)

...Testing Equipment Plastic Ignition Temperature Test Apparatus Description: Decompose and release the combustible gas from plastic material under regulated testing conditions,ignited by outer flame and burned a certain time,to measure the minimum temperature of the material.Application comparison within material through the testing results. Standard: ASTM...

Brand Name:AI

Model Number:AIC-61241

Place of Origin:CHINA

...Ignition Temperature Test Apparatus Introduction The Minimum Ignition Temperature Test Apparatus is a way of testing the sensitivity of the ignition that the dust cloud is in the heated environment. When a lot of dust is exposed in heating the air and the air temperature is high enough, it may lead to spontaneous combustion. This method can test the minimum ignition temperature...

Brand Name:HOOHA

Place of Origin:China

...the material.Application comparison within material through the testing results. Standard: ASTM D 1929,GB/T 4610,GB/T 9343, ISO 871 Specification: Furnace tube inner diameter 100 ± 5mm, length 240 ± 20mm, not less than 750 ℃ temperature ceramic tube;

Brand Name:shengtai Instrument

Model Number:SH0325

Place of Origin:CHINA

Product Description: One of the key features of this product is its ability to perform the ASTM D4684 Engine Oil Borderline Pumping Temperature Test. This test is crucial for determining the lowest temperature at which an engine oil can flow through the ...

Place of Origin:China

Brand Name:CHENGFENG

ISO 871/ ASTM D1929 Test Equipment for Autoignition Temperature Flammability of Plastics Specification Temperature control accuracy ±2°C, adjustable between 150°C~450°C Display accuracy ±0.5°C Timer accuracy 0.1s Stainless steel container dimensions ...

Brand Name:VOUCH

Model Number:5114

Place of Origin:CHINA

... test, combustibility test of electronic industry, home electronic appliance and materials. The glow wire apparatus and common test procedure is to simulate the effect of thermal stressed witch may be produced by heat sources such as glowing elements or

Brand Name:LONROY

Place of Origin:Guangdong, China

...Ignition Temperature Tester Autoignition Test Apparatus Spontaneous Combustion Device Self-heating Point Analyser Applicable Standard GB/T 21756-2008 Chemical products for industrial use – Determination of the relative self-ignition temperature of solid substances Solid Self-Ignition Temperature Tester Autoignition Test Apparatus...

Brand Name:lixian

Model Number:HZ-Building Material Fire Tester-12

Place of Origin:CHINA

... smoke generated by the determination of smoke, is the test of textile materials, solid material burning smoke production of special equipment. Building Material Fire Tester Standards compliant: GB / T 8627, ASTM D2843 Building Material Fire Tester The

Brand Name:kingpo

Model Number:FTech-ASTM162

Place of Origin:china

...Test apparatus for material for rail train Description ASTM E162 is one most widely used test standard to evaluate the propagation properties of material in USA. The heat resource use gas radiant panel heating and a gas burner ignited. This method is widely used in flame propagation properties of the test...

Brand Name:JINHAIHU

Model Number:XRW-300F

Place of Origin:BEIJING, CHINA

... programmable controller temperature control using computer display operation.The product is simple to operate, convenient to use, stable in performance, high in precision, and can monitor the test temperature and deformation amount in real time during the

Brand Name:Sinuo

Model Number:SN772

Place of Origin:China

...Test Apparatus Initiation Temperature And Flammability Index Testing Product information: This device is manufactured according to the standard of IEC60695-2-10, IEC 60695-2-11, IEC 60695-2-12, IEC60695-2-13, it is required by IEC 60335 clause 30, IEC 60598, UL746A, etc. This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition...

Brand Name:SKYLINE

Model Number:SL-S025

Place of Origin:China

...Test Apparatus Non-Combustibility Tester Performance Characteristics Measures incombustibility of uniform and non-uniform building materials Evaluates rising furnace temperature, mass loss, and specimen ignition Single Zone Furnace operates up to 900℃ with Kanthal Ribbon Heater Precise 750±5℃ temperature control via PID and Power controller Stabilized voltage supply for rapid temperature...

Brand Name:Sinuo

Model Number:SN772

Place of Origin:China

... index (GWFI) test method for materials” IEC60695-2-13 “Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials” IEC60695-2-10 “Fire hazard testing - Part 2-10:

Brand Name:SHC

Model Number:SC-GW01

Place of Origin:China

...the testing temperature of 550 ℃ ～ 960 ℃ for 1 min by using the glow wire tester with large current. Then using required pressure (1.0N) vertically burns the test sample for 30s. By observing whether the test sample and bedding object ignite or the

Brand Name:Haida

Model Number:HD-W810-5

Place of Origin:China

Equipment Details For 45°Flammability Tester Application Flammability Tester is used to test the burning properties of textile fabrics, such as clothing fabrics, decorative fabrics, tent fabrics, etc. Testing standard GB/T 14644 Textiles - Determination...

Brand Name:Shengtai instrument

Model Number:SH017

Place of Origin:China

ASTM D217 Automatic Constant Temperature Cone / Needle Penetration Tester SH017 SH017 Automatic Constant Temperature cone/needle penetration Tester is designed and manufactured according to the technical requirements and relevant regulations of GB/T269 ...

Brand Name:YUYANG

Model Number:YYJ07

Place of Origin:China

...control (A) Salt spray test: NSS, ACSS 1. testing room : 35 ℃ ± 1 ℃ 2 saturated air barrels : 47 ℃ ± 1 ℃ (B) anti-corrosion test: CASS (copper acetate) 1.testing room: 50 ℃ ± 1 ℃ 2 saturated air barrels: 63 ℃ ± 1 ℃ 2, air supply system

Brand Name:LIB

Model Number:S-010

Place of Origin:China

...apparatus are compatible with multiple test standards including automotive standards and they can be alternated,cycled between varied humidity programs with the traditional salt spray. Salt mist cyclic corrosion apparatus meet the requirements of basic, continuous salt spray tests conducted at a single temperature only, such as ASTM B117 and similar international test...