50 ohm rf termination load

Place of Origin:China

Brand Name:Huawei/ZTE

Model Number:N Male Connector for RG8U/LMR400

N Male Connector for RG8U/LMR400 | 50 Ohm RF Coaxial Connector This N Male Connector for RG8U/LMR400 serves as a reliable RF coaxial termination part for RG8U and LMR400 coax cables. It features standard 5/8-24 threaded coupling, so it locks tightly and ...

Brand Name:Customization

Model Number:50 Ohm RF Termination Load Connector

Place of Origin:China

...RF testing equipment, and microwave transmission networks. By terminating unused RF ports with a stable 50-ohm load, the device helps minimize signal reflections, reduce standing wave ratios, and protect sensitive RF equipment from performance degradation.

Model Number:LCTR1007

...RF termination (also known as an RF load or dummy load) designed for coaxial termination in 50 Ohm applications. Operating from DC to 18 GHz, this SMA female termination effectively absorbs incident energy with minimal reflection, preventing potential damage to devices or signal degradation. It is commonly used in RF, microwave, and millimeter wave systems to terminate...

Brand Name:Vinncom

Model Number:VN-LD-4G-60~80W-ODf

Place of Origin:CHINA

80 Watts 3.8GHz 4GHz DIN Female Rf Termination Dummy Load Good VSWR Good water resistance Better heating shrink Part Number VN-LD-4G-60~80W-ODf Operating Frequency ( GHz ) 0-4 Impedance ( Ohm ) 50 VSWR ≤1.20 IM3 (dBc @ 2×43dBm) -110 / -120 Application ...

Brand Name:Vinncom

Model Number:VN-LD-4G-100W-ODM

Place of Origin:CHINA

...RF Dummy Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load

Brand Name:ZD

Model Number:zd-att-10n

Place of Origin:China

...expanding power range and controlling power level, they are also used in accurately measuring power or spectrum of RF microwave transmitters accompany with small power meter, comprehensive tester or spectrum analyzer. DTS serial coaxial fixed attenuators'

Brand Name:BONENS

Model Number:RIG

Place of Origin:Sichuan, China

...50 ohm RF Resistor High Frequency Resistance Dummy Load Resistor product name: Electronic component passive component RF resistor 50 ohm 100 ohm 1000W flange installation terminal resistor ceramic power resistor product description: Description: RIG high power resistance is also called RIG RF resistor, RF RF resistor, high frequency RF resistor, flange RF resistor, load RF resistor, RF...

Categories:RF Termination Load

Country/Region:china

FEATURES: ★Wide frequency band, wide coverage. ★PIM optimized design. ★Ideal for all kind of IBS/DAS/PDAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications: Input Power(W) 5 10 30 50 RF ...

Brand Name:DALEE

Model Number:DL50011207

Place of Origin:Guangdong,China(Mainland)

... and the latest REACH Voltage Rating: 60 VAC Operating Temprature: -40℃ - +85 ℃ Nominal Characteristic Impedance: 50 ohm Applicable Frequency: DC~6 GHz Vspr: 1.3 MAX.(DC~3GHz). 1.5 MAX.(3~6GHz) Contact plating : 1u’’/1.5u’’ Grounded ...

Brand Name:KRONZ

Model Number:KRF800-A50F03B

Place of Origin:Guangdong, China

... DC–1GHz VSWR ≤ 1.25 :1 Operating Temperature -55 to +150℃ Temperature Coefficient ±150ppm/℃ Product Features High power 50Ω RF termination solution Flange mount design for secure installation Aluminum Nitride (AlN)

Brand Name:BOGES

Model Number:ZL-BNCMFOD-001

Place of Origin:Dongguan, Guangdong, China

... Frequency for 50 Ohm RF Coaxial Cable​ Product Description : RF coaxial BNC connectors which is designed to provide low reflection from DC to 11 GHz under extreme environmental conditions, especially shock and vibration. Cable terminations are available...

Brand Name:Zysen

Model Number:ZSBP28000-400U7CK

Place of Origin:Chengdu,China

...50 Ohms RF Microwave Filter Zysen's bandpass filter P/N ZSBP28000-400U7CK, Pass band frequency 27.8 to 28.2GHz, bandwidth 400MHz, insertion loss better than 2.2dB, VSWR is 1.4:1 Max, and rejection better than 30dB, connector with 2.92mm female. Frequency Range 27.8~28.2GHz Insertion Loss 2.2dB max VSWR 1.4:1 max Stop Band Rejection 30dB min @ DC-27.5GHz 30dB min @ 28.5-40GHz Impedance 50 ohms...

Brand Name:Zysen

Model Number:ZSBP28000-400U7CK

Place of Origin:Chengdu,China

...50 Ohms RF Microwave Filter Zysen's bandpass filter P/N ZSBP28000-400U7CK, Pass band frequency 27.8 to 28.2GHz, bandwidth 400MHz, insertion loss better than 2.2dB, VSWR is 1.4:1 Max, and rejection better than 30dB, connector with 2.92mm female. Frequency Range 27.8~28.2GHz Insertion Loss 2.2dB max VSWR 1.4:1 max Stop Band Rejection 30dB min @ DC-27.5GHz 30dB min @ 28.5-40GHz Impedance 50 ohms...

Brand Name:ZSX

Model Number:SMP/SMA-KK

Place of Origin:China

50 Ohm RF Adapter DC-6GHz Female To Female Coax Adapter SMP To SMA SMP Female to SMA Female RF Adapter RF Adapters are passive components used in signal transmission systems for Radio Frequency applications (typically 3 kHz to 300 GHz frequency band). These adapters facilitate reliable connections and signal conversion between different RF...

Brand Name:ELT (Elite)

Model Number:SMA-JB2D

Place of Origin:China

...50 Ohm RF Connector For 2# Simi Rigid / Flexible Cable SMA connectors are small, high frequency RF coaxial connector. It has the advantages of small size, wide frequency band, superior mechanical and electrical performance, high reliability, etc. It is the most widely used RF...

Brand Name:Sinrui

Model Number:BNC-KYA

Place of Origin:China

Products Name: RF BNC 50 Ohm DC 4GHz Female straight coaxial Connector Nut Mounting & Panel Mounting with cable Products Descrption: BNC connectors have a bayonet-lock interface. It exists in 50 and 75 ohm versions. Typically, they are specified for use...

Brand Name:GRF

Model Number:LBQ-3

Place of Origin:CHINA

... range of -40°C to +85°C. This makes it the ideal choice for use in a variety of environments and applications. With an insertion loss of only 0.5 dB, the RF Power Filter is able to effectively filter out unwanted electromagnetic interference (EMI)

Categories:Custom Cable Assembly

Country/Region:china

...cable is a flexible 50 Ohm RF cable assembly designed for signal connection between antennas, RF equipment, wireless communication systems and other RF devices. The RG58 jumper cable can be assembled with various commonly used RF connectors, including N, ...

Place of Origin:Shanghai, China

Brand Name:Bing Wire & Cable

Model Number:SR-070C

... copper tube construction with 100% RF shielding, this 50 Ohm RF coax cable utilizes a silver-plated copper center conductor with no steel content, verified non-magnetic for MRI systems, quantum ...

Place of Origin:China

Brand Name:KINGTONE OR OEM

Model Number:Low Loss 195 Coaxial Cable

50 Ohm Cable Low Loss 195 with 0.94mm Bare Copper with 89% Tinned Copper Braid Quick Detail: Low Loss 195 Coaxial Cable 50 Ohm Communication Cable 0.94mm Bare Copper 89% Tinned Cooper Braiding Designed for Flexibility, Low Loss, RF Shielding ISO, CE, RoHS, UL Description: KT0501 50 ohms...