16mm rails elevator progressive safety gear

Brand Name:SUNNY

Model Number:SN-SG-HN1600

Place of Origin:China

... Rail Status Dimensions (Fixed Installation) mm 0.40-1.00 0.46-1.65 600-1600 10/15.88/16 GB Dry/Lubricated 176x186x60 FAQ 1. Are the elevator wire ropes durable? The elevator wire rope has special provisions and requirements. Configuration is not only for

Brand Name:SUNNY

Model Number:SN-SG-L01

Place of Origin:China

...elevator / Paranomic elevator Progressive Safety Gear / elevator parts Progressive Safety Gear *1 Optimized model *2 Standard model SN-SG-L01 Rated speed : ≤2.5m/s Tripping speed: ≤3.23m/s Total mass(P+Q): 500kg-3000kg*1 500kg-3600kg*2 Width of rails’guiding surface: 9mm/10mm/15.88mm/16mm SN-SG-L02-Instantaneous Safety Gear Rated speed : ≤0.63m/s Tripping speed: ≤0.8m/s Total mass(P+Q): ≤1500kg Width of rails...

Brand Name:Zanfeng

Model Number:ZF.QS12D/X01

Place of Origin:China、sahnghai

... as emergency braking device or stop brake device. Its main function is to stop the operation of the elevator urgently by clamping the guide rail in case of abnormal situations such as overspeed and fracture, so as to protect the safety of passengers and

Brand Name:GYG

Model Number:GX-188

Place of Origin:China

ELEVATOR SAFETY GEAR GX-188 , PROGRESSIVE SAFETY GEAR , ELEVATOR SAFETY PARTS RATED SPEED 2.5M/S The elevator safety gear is a device under the control of speed governor, when the elevator over speed its rated speed or in the case of suspension rope breakage or slack, the car stop in emergency and clamp on the guide rail. It provides effective protection to the safe operation of the elevator...

Brand Name:WELLIFT

Model Number:WT

Place of Origin:China

...Total Lift Weight P+Q: ≤2800kg Type: Elevator Parts Applicable of guide rail T-8K T-13K T-18K Saftety gerar action needed pull force suggested setting range 200-300N Used: Passenger Elevator Model: Car Parts Please feel free to contact us if you have any

Place of Origin:China

Brand Name:KANGBO

Model Number:SC200/200(BD)

Place of Origin:CHINA

... that is 4.5mm thick. 2. Gear rack The gear rack is made of 55# steel and its service life is about 10 years. 3. Power system Same as the engine of a car, the elevating conveyor is the core part of an elevator. The housing is made of 104# GB aluminum to

Brand Name:KN

Model Number:KM86375G16

Elevator oil cup function, To lubricate the parts, different oil is used for different parts of the elevator: the two ends of the motor are greased for the bearing, oil for the shaft sleeve, and gear oil for the reduction box. Butter: is the common name for calcium-based grease. Details for Kone Elevator Lift Spare Parts LUBRICATOR GUIDE RAIL 16MM...

Brand Name:haoxiang

Model Number:DSL2-4

Place of Origin:Guangdong, China

... of 5 tons. It features a full-electric drive motor, which powers a gear pump through a heavy-duty chain, ensuring absolute safety during operation. With multiple control points and interlocking mechanisms for different floors, it guarantees safe usage,