PLC G5/G13 Lampholders Axial Force Test Device Clause 4.4.4 For Fluorescent Lamps
|
...) for fluorescent lamps according to IEC60598-1 clause 4.4.4. It is applied to assess the fixing device of lamhpolder should have adequate mechanical strength so as to withstand rough handling as may be expected in normal use. The test should be checked by...
Pego Electronics (Yi Chun) Company Limited
|
Luminaries Fluorescent Lamp Holder Axial Force Test Device IEC 60598-1
|
... to IEC60598-1 clause 4.4.4 Product Overview For Fluorescent Lamp Holder Axial Force Test Device: It is applicable to axial pressure is applied to the G5 lamp holder of 15N, 30N axial pressure exerted on the G13 lamp holders, pressure holding time 1...
Sinuo Testing Equipment Co. , Limited
|
IEC62196 Electric Vehicle Charging Interface Insertion Force Test Device
|
...Force Test Device Complied Standards & Clauses for Charging Interface Insertion Force Test Device IEC 62196-1:2020 clause 14.1.5, 14.1.6, fig13, fig14. IEC 62196-1:2014 clause 17.2. Technical Parameters for Charging Interface Insertion Force Test Device Test......
Sinuo Testing Equipment Co. , Limited
|
Fluorescent Lamp Holder IEC60598-1 Axial Force Test
|
...Axial Force Tester Technical parameters: Power 220V 50Hz The axial force 15N (bar weight), 30N (superimposed by a 15N vias weight onto the bar) Fixtures V-type fixture, front and back adjustable Holding specimen height range 0-250mm Product information: The test equipment is designed and manufactured according to IEC60598-1 clause 4.4.4 standard test item requirements, test content: axial......
Guangzhou Shice Equipment Co., Ltd.
|
Adhesive Force Test Device for Hot Dip Galvanizing Coating
|
...hot dip galvanizing coatings. During the test, the free dropping hammer is used to hit the zinc coating to test whether the zinc coating confirms to the standard requirement. This item is appropriate for the manufacture factory like the iron tower and the...
Dongguan Kingpo Technology Limited
|
Socket Pull-out Force Test Device Test Plug Roughness ≤ 0.8mm Weight 1 Set Stackable Professional Plug Socket Tester
|
... safety and convenience. As a source manufacturer, we deeply understand the far-reaching impact of every detail on user experience and safety. The HC9916 socket pull-out force test device is like a...
Guangzhou HongCe Equipment Co., Ltd.
|
PLC Control Furniture Testing Device For Drawer Mechanical Durability Testing
|
PLC Control Furniture Testing Device For Drawer Mechanical Durability Testing Application: Drawer Durability Tester is used to test the durability of the drawer slides of furniture. Apply a certain load inside the drawer, repeated pull-out and close of the drawer. After a certain number of cycles, check if the slide is still able to meet the requirements. Technical Parameter: Model TNJ-005 Maximum stroke 400mm Speed 0.25m/s Test......
Dongguan Hust Tony Instruments Co.,Ltd.
|
Tension and Compression Type Force Testing Devices Load Cell IN-LFSMC-A
|
Tension and Compression Type Force Testing Devices Load Cell Load Cell Dimenison Load Cell Dimension Items UNIT TECHNICAL DATA Rated capacities(Emax) t ......
Innovation Electronic Co.,Ltd
|
ASTM D6055 Package Testing Equipment , PLC Control Package Clamp Force Testing Machine
|
... 2.Up to ASTM D6055 3.PLC control Safety protection Overload protection, overvoltage protection & limited position protection device Clamp Compression Testing Method of Large Products 1.Before placing the packaged product between platens, verify that the...
Dongguan Haida Equipment Co.,LTD
|
220V 50Hz Axial Force Tester , Environmental Luminaries Test Equipment
|
... test item requirements, test content: axial pressure is applied to the G5 lamp holder of 15N, 30N axial pressure exerted on the G13 lamp holders, pressure holding time I minutes, then quit, deformation detection lamp holder shall not ......
KingPo Technology Development Limited
|
Submit your “plc axial force test device” inquiry in a minute :