EN 50281-2-1 Minimum Ignition Temperature Test Equipment For Electrical Products
|
...Minimum Ignition Temperature Test Apparatus Introduction The Minimum Ignition Temperature Test Apparatus is a way of testing the sensitivity of the ignition that the dust cloud is in the heated environment. When a lot of dust is exposed in heating the air and the air temperature is high enough, it may lead to spontaneous combustion. This method can test the minimum ignition temperature......
Advanced Instruments Co.,Limited
|
IEC 61241 Resistant Fuel Oil Minimum Ignition Temperature Test Machine
|
... to maintain circuit integrity when subject to fire alone or fire with shock where the test condition is based upon flame with a controlled heat output corresponding to a temperature of at least 750˚C or fire with shock at a temperature of at least...
Delta Technology (Chongqing) Co., Ltd.
|
50hz Combustible Dust Flammability Testing Machine For Minimum Ignition Temperature
|
...Minimum Combustible Dust Minimum Ignition Temperature Tester Introduction: This machine is a way of testing the sensitivity of the ignition that the dust cloud is in the heated environment. When a lot of dust is exposed in heating the air and the air temperature is high enough, it may lead to spontaneous combustion. This method can test the minimum ignition temperature......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Laboratory Flammability Testing Equipment Plastic Ignition Temperature Test Apparatus
|
...Testing Equipment Plastic Ignition Temperature Test Apparatus Description: Decompose and release the combustible gas from plastic material under regulated testing conditions,ignited by outer flame and burned a certain time,to measure the minimum temperature of the material.Application comparison within material through the testing......
Dongguan Hust Tony Instruments Co.,Ltd.
|
ISO 871 / ASTM D1929 Plastic Ignition Temperature Testing Equipment
|
...the material.Application comparison within material through the testing results. Standard: ASTM D 1929,GB/T 4610,GB/T 9343, ISO 871 Specification: Furnace tube inner diameter 100 ± 5mm, length 240 ± 20mm, not less than 750 ℃ temperature ceramic tube;...
Dongguan HOOHA Electrical Equipment Company Limited
|
Plastic Spontaneous Ignition Temperature Flammability Testing Equipment For ISO 871 / ASTM D1929
|
...Ignition Temperature Testing Equipment for ISO 871 / ASTM D1929 Description: Decompose and release the combustible gas from plastic material under regulated testing conditions,ignited by outer flame and burned a certain time,to measure the minimum temperature of the material.Application comparison within material through the testing......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
High Accuracy Minimum Ignition Energy Tester MIE Test EN 13821
|
...combustible materials (such as dust, gas, or steam) under specific conditions. The instrument accurately quantifies the minimum energy required to cause combustion or explosion of combustibles by simulating real scenes such as electrostatic discharge and...
Chongqing gold mechnical and electrical equipment Co., Ltd
|
A2L, IEC 60335-2-40 Annex KK Test Equipment for hot surface ignition temperature
|
Test method for hot surface ignition temperature for A2L, IEC 60335-2-40 Annex KK KK.1 General The hot surface ignition temperature of A2L refrigerants shall be determined according to Annex KK. The refrigerants shall be sprayed onto a horizontal flat plate surface which is set at the test temperature. The test system consists of a hot plate, a spray tube and a chimney. Figure KK.1 , Figure KK.2 and Figure KK.3 display the set-up of the test...
KingPo Technology Development Limited
|
Ignition Temperature Tester Plastic Spot Temperature Tester GB4610-2008
|
...Temperature Tester, Is Designed and Manufactured in Accordance with GB4610-2008 Product Description CF8602 Plastic Spot Temperature Tester Product Description: Also known as: GB4610-2008 ignition temperature tester GB/T9343-2008 plastic hot air furnace ignition temperature tester DX8602 ignition temperature tester is designed and manufactured in accordance with GB4610-2008 "Determination of Ignition Temperature......
Dongguan Chengfeng Testing Equipment Co., Ltd
|
Standard GB5169 Glow Wire Test Apparatus , Hot Wire Ignition Test Flammability Temperature Test
|
... test, combustibility test of electronic industry, home electronic appliance and materials. The glow wire apparatus and common test procedure is to simulate the effect of thermal stressed witch may be produced by heat sources such as glowing elements or...
Suzhou Yangyi Vouch Testing technology Co.,Ltd
|
Submit your “minimum ignition temperature test” inquiry in a minute :