10KN Sole Adhesion Tester / Shoe Testing Machine For Tear , Break Test
|
... tension, bending, peeling, compression, sagging, adhesion, tear and other mechanical tests and analysis to metal and nonmetal raw material and workpiece. 1.Mechanical test like tensile,compression,bending,......
SKYLINE INSTRUMENTS CO.,LTD
|
Footwear Adhesive Tester For Adhensive Strength Between The Shoe Soles And All Side
|
...all side. Meet the standard GB / T 3903.3-94. Machine Principle: the finished shoes fitted on boot tree clamped on the adhesive tester, Using peel knife to peel the part between the soles and all sides, Measuring the adhesive force as peeling, and then...
Dongguan Zhongli Instrument Technology Co., Ltd.
|
120W Shoe Sole Flex Tester Bend Speed 140 Times Per Minute 90° Bending
|
...Sole Flex Tester,Bend Speed 140 Times Per Minute And 3group Test Class Number Product introduction Shoe Sole Flex Tester is to test the use life after the sole flexed. The sole may break or craze after long-time roller bending. When using this machine, impale several holes at the place where has max bending rate, then fix the two ends of the sole......
Haida Equipment Co., Ltd
|
LCD Digital Display HUATEC HKSM-1 Adhesion Tester Pull Method
|
LCD Digital Display HUATEC HKSM-1 Adhesion Tester (Pull Method) Application field HKSM-1 puller adhesion tester can measure the adhesion of metal, paint, spray, waterproof material, adhesive, chrome plating, nickel plating, concrete and other material coatings. The working principle of the instrument is to use the hydraulic system to measure the adhesion......
HUATEC GROUP CORPORATION
|
ASTM D1630 Compliant Rubber Shoe Sole Abrasion Tester with LCD Control and Vacuum Cleaner
|
UP-1009 Compliant With ASTM D1630 NBS Rubber Shoe Sole Abrasion Tester Application Determine the resistance to abrasion of vulcanized rubber or other compounds used for the soles and heels of footwear. Not recommended for materials less than 2.54 mm (0.......
Dongguan Youbi Test Equipment Co.,Ltd
|
Pull-off Coating Adhesion Tester,Digital Pull Off Adhesion Tester,Bond Strength Usage Pull-off Adhesion Tester Small Met
|
... diameter of coating away from its substrate using hydraulic pressure. The pressure is displayed on a digital LCD, representing the coating's strength of adhesion to the substrate. Application Methods Cross-Cut Test Assesses paint and coating resistance to...
DONGGUAN LONROY EQUIPMENT CO LTD
|
GB/T4852 Steel Ball Initial Tape Adhesion Tester
|
...Adhesive Tape Testing Machine , Initial Adhesion Tester Usage: Steel Ball Adhesive Tape Initial Adhesion Testing Machine is suitable for testing sensitive adhesive tape and the product similar to the pressure sensitive adhesive tape products. Definition: Initial adhesion——Objects and pressure-sensitive adhesive tape with small pressure brief contact between the cohesive surface, the adhesion of adhesive......
Guangdong Aisry Instrument Technology Co., Ltd.
|
Paint Coating Pull off Strength Tester ASTM D7234 Digital Pull off Adhesion Tester
|
... the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. The pressure is displayed on a digital LCD and represents the coating’s strength of adhesion to the substrate....
DongGuan Q1-Test Equipment Co., Ltd.
|
GB/4852, PSTC7 CertificatedTape Rolling Peel Adhesion Test Equipment Primary Adhesive Tester 2.5kg
|
...Adhesion Test Equipment Primary Adhesive Tester 2.5kg Uses: Primary Adhesive Tester is applicable in primary adhesive test of tape. Roll the specified steel ball through chute. Measure the distance that the steel ball had rolled on the surface of plate which sticked by the adhesive......
GUANGDONG KEJIAN INSTRUMENT CO.,LTD
|
Electronic Tape 30° Tilt Angle 500g Adhesion Tester
|
..., ( normal use 30°) Rolling ball Steel, from 1/32” ~ 1” Weight 500g Run-up segment 100mm Principle : Definition: Initial adhesion: Objects and pressure-sensitive adhesive tape with small pressure brief contact between the...
Perfect International Instruments Co., Ltd
|