Home > Electrical Equipment & Supplies > Electrical Supplies > Plugs & Sockets >

Iec Ev Connector Testing Equipment

1-10 Results for

iec ev connector testing equipment

from 462 Products

EV Connector Testing Equipment Standard Test Probe B IEC 62196

EV Connector Testing Equipment Standard Test Probe B IEC 62196 Complied Standards & Clauses Conforms to IEC 62196-1:2022 clause 10.1. IEC 62196-1:2022 clause 10.1. Equipment Overview This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test......

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China

EV Connectors Testing Equipment IEC 62196 Test Finger Probe B with 42V Electric Indicator

...be used to test the EV socket-outlets and vehicle connectors, it's strictly designed according to IEC61032 figure 2, and meets the requirements of IEC62196-1 clause 10.1, UL507, UL1278 figure 8 and IEC60529 figure 2. The test finger probe is intended to...

Pego Electronics (Yi Chun) Company Limited

Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China

IEC 62196 Vehicle Testing Equipment 5000N Drive Over Test For Plug / EV Connector

IEC 62196 Vehicle Testing Equipment 5000N Drive Over Test For Plug / EV Connector Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from being left on the ground. It is required by IEC 62196-1:2022 clause 33, IEC 62752:2016 clause 9.34, etc. Test...

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

AC220V EV Battery Testing Equipment GB 8897 IEC 62133 Standard

AC220V EV Battery Testing Equipment GB 8897 IEC 62133 Standard Battery Impact Tester Instruction: Put the battery on the plane.Put a bar at a diameter of 15.8mm(5.8inch)crosswise on the central positio.Drop a 9.1-10kg object at the height of 610±......

Dongguan Kingpo Technology Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

8 Channel EV Battery Test Equipment , Neware 3V - 60V Car Battery Discharge Tester

8Channel EV Battery Test Equipment Manufacturers Discharge Battery Testing System Features 1. High-level power density system with multi-channel integration and capable for energy recovering. 2. HMI operation, smart calibration. 3. ......

Neware Technology Limited

Address: 15/F, Tower 3, Excellence City, No.128, Zhongkang Rd., Shenzhen, CHINA 518049

IEC 60669-1 Test Equipment Self Ballasted Lamp Bulb Load Box Three Test Stations

... – Part 1: General requirements clause 19.3 Test for switches intended for self ballasted lamp loads. Application of Self Ballasted Lamp Load Box: Switches intended for self ......

HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

Address: No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China

IEC 62133 Battery Testing Equipment Electric Vibration Testing System

..., fire or explosion. The electrodynamic vibration test system is a precision test equipment that simulates the actual working environment of a battery. The vibration test system consists of four parts: vibration test bench, power amplifier, controller and...

Guangzhou HongCe Equipment Co., Ltd.

Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

IEC 60529 IP Testing Equipment , IPX1 IPX2 Movable Rain Drip Box Ingress Protection Test Equipment

... is designed and manufactured according to IEC 60529 Degrees of protection provided by enclosures (IP Code), this equipment is widely used in lamps, electric and electronic products certification testing of IPX1,IPX2. This device has been widely adopted by...

KingPo Technology Development Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

Fire Resistance Test Furnace IEC 60331 , Impact Test Equipment For Wire / Cable

IEC 60331 Wire and Cable Fire-resistance Impact Testing Equipment Descriptions: Wire and Cable Fire-resistance Impact Tester is used to detect the fire resistance of cable wiring or power grid, burning in not less than 830 degrees, the flame, and exerts certain impact vibration, cable integrity test circuit. Standards: IEC 60331 Testing of wire and cable - circuit integrity under flame conditions IEC......

DONGGUAN YUYANG INSTRUMENT CO., LTD

Address: B1505, FORTUNE PLAZA, No.1, Yuanmei Road, Nancheng District, Dongguan City, Guangdong Province, China

IEC 60754 Wire Testing Equipment , Cable Halogen PH And Conductivity Testing Equipment

... cables and the determination of gas acidity by measuring ph and conductivity. Remark: - IEC 60754-1, 2 Electric Cables Halogen Acid Gas Release Tester, Cable Corrosion Tester measures gas volume of Halogen Acid (IEC 60754-1), pH concentration(PH Meter,...

DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD

Address: No.168 Zhen'an West Road Changlian Industry Mansion Xiabian Community Dongguan China

Submit your “iec ev connector testing equipment” inquiry in a minute :

*From:	Your email address is incorrect!
To:	DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD Products: IEC 60754 Wire Testing Equipment , Cable Halogen PH And Conductivity Testing Equipment
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “iec ev connector testing equipment” inquiry

*From:
Your email address is incorrect!
To: Sinuo Testing Equipment Co. , Limited
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

Inquiry Cart 0