IEC 62368-1 Clause V.1.2 Figure V.2 Jointed Test Probe For Equipment
|
... clause 5.3.2, 8.5.4.3, V.1.2 and figure V.2, IEC60884-1:2013 clause 10.1, 16.2, IEC 60669-1: 2017 Clause 10.1 &13.3.3 &20.1 &21.1, etc. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the...
Sinuo Testing Equipment Co. , Limited
|
UL Standard / IEC 62368-1 Figure V.1 heat-treated steel Jointed Test Probe Simulating Human Finger Movement
|
...IEC 62368 -1-Figure V.1 Heat-treated steel Steel Jointed Test Probe Simulating Human Finger Movement Application: This jointed Test Finger Probe is strictly designed and manufactured according to UL507,UL982,UL1278,UL1062,UL1310,UL474,UL60065 . Palm simulator and restricted joint movement simulates human finger movement. Made of all nylon. Bell-Core accessory available.This ul jointed test finger probe......
KingPo Technology Development Limited
|
IEC 60529 Jointed Test Finger Probe Stainless Steel With 50N Force
|
Test Finger Probe Access Probes of IEC 60529 Jointed Test Finger With 50N Force Standard: IEC 60529 Degrees of protection provided by enclosures (IP Code) Figure 1 – Jointed test finger. IEC 61032 Protection of persons and equipment by enclosures –Probes for verification Figure 2–Test probe B. And other standard such as IEC 60335-1, IEC60884-1, IEC 60598-1, IEC60065-1, IEC 62368......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC62368 Jointed Test Probe / Finger Length 80mm Diameter 12mm
|
..., IEC335, UL507, EN60529 figure 1, UL1278 figure 8.4 and etc. Standard description: Test Finger Probe IEC62368-1 T.3 Steady force test, 30 N Test Finger Probe The test is conducted by means of the straight unjointed version of the applicable test probe of...
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 62196 Jointed Test Finger EV Connector Testing Equipment
|
IEC 62196 Jointed Test Probe For Electric Vehicle Connector Test Complied Standards & Clauses IEC 62196-1Ed.4CDV 2020 clause 10.1. Equipment Overview This is a precision test finger made in accordance with many standards like IEC 62196-1Ed.4CDV 2020 clause 10.1. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger probe...
Sinuo Testing Equipment Co. , Limited
|
80mm Blunt Probe As Per IEC 60950 IEC 60065 IEC 62368-1 For Testing TNT Circuit
|
Blunt Probe as Per IEC60950, IEC60065 and IEC62368-1 for Testing TNT Circuit 1. Introduction The blunt probe is designed according to IEC60950 figure 2C, IEC60065 figure B1, IEC62151 figure 3, UL6500 figure B.1, IEC62368-1 figure V.3. It is applied to ......
Pego Electronics (Yi Chun) Company Limited
|
IEC Standard Articulated Test Probe with 10N Thrust, IEC 61032
|
...standards of CSA, IRAM, UL. IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts. The Jointed Test Finger was made on stainless steel and Polyamide handle. Material: Stainless Steel. Handle: Polyamide....
HK LEE HING INDUSTRY CO., LIMITED
|
Stainless Steel IEC 62368 Figure V.5 Terminal Probe
|
...Test Probes IEC62368 probe no. Probe Name IEC 62368 Figure V.1 Jointed test probe for equipment likely to be accessible to children IEC62368 Figure V.2 Jointed test probe for equipment like to be accessible to children IEC62368 Figure V.3 Blunt probe, Telecom Test Probe IEC62368 Figure V.4 Wedge probe IEC62368 Figure V.5 Terminal probe I) IEC 62368 Figure V.1 Jointed test probe......
Guangzhou Shice Equipment Co., Ltd.
|
Standard Test finger probe,test probe B iec 61032 EN60335,testing probe
|
... of person aganist access to to harzardous parts of an IP2 code.Also used to verify protection from access with the back of the hand for an IP suffix B code. Standard test finger probe is made of plastic and steel,very precision....
ALLIED TESTING (HK) CO.,LTD.
|
EU Portable Energy Storage Certification LVD 2014/35/EU EN IEC 62368 Lighting Test
|
...IEC 62368) Some EU Portable Energy Storage Certification experimental methods: Overcharging of rechargeable battery pack. The battery pack is charged only to withstand any single fault condition that may occur in the charging circuit and can cause the battery pack to overcharge. To minimize the test......
Shenzhen LCS Compliance Testing Laboratory Ltd.
|
