CHT-800 Temperature Humidity Test Chamber 800L -20°C~+150°C 20-98% RH for Packaging Test
|
...Test Chamber (Constant Temperature and Humidity Chamber) is a professional environmental testing instrument used to simulate temperature and humidity conditions for product reliability evaluation. It fully complies with IEC 60068-2-78, GB/T 2423.3, ISO 6270-2 and is widely used in electronics, automotive, battery, material and packaging industries. Key Features 800L large capacity chamber Packaging damp heat testing...
Dongguan Chengfeng Testing Equipment Co., Ltd
|
IEC 60068-2-2 Constant Temperature and Humidity Test Chamber 80L with Temperature Range -20℃→+150℃
|
..., appliances, and plastic components. It verifies product reliability during storage and transportation in controlled environmental conditions. Sample Limitations This equipment is prohibited from testing or storing:...
Sinuo Testing Equipment Co. , Limited
|
ISO 9360-2-figure 1 Test Chamber
|
ISO 9360-2-figure 1 Test Chamber ISO 9360-2-figure 1 Test Chamber...
KingPo Technology Development Limited
|
Keysight N8975A Noise Figure Analyzer with 10 MHz to 26.5 GHz Range Simultaneous Noise Figure and Gain and APC 3.5 (m) Connector
|
Keysight N8975A Noise Figure Analyzer 10 MHz-26.5 GHz One Box Solution APC 3.5 mm Product Overview The Keysight (Agilent) N8975A is a high-performance noise figure analyzer designed for fast, accurate and repeatable noise figure (NF) measurement from 10 ......
Shenzhen Meigaolan Electronic Instrument Co. Ltd
|
1m3 Chamber Volume IP Test Equipment Dust Test Chamber IEC 60529 Figure 2
|
... number 5 and 6. IEC 60598-1 Luminaires – Part 1: General requirements and test clause 9.2 test for ingress of dust, solid objects and moisture. Application: It artificially simulates the dust environment to test the dust-proof ability of the...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IPX5X IPX6X 1000L Sand And Dust Test Chamber PLC Control Figure 2
|
... of protection provided by enclosure (IP code)> Fig 2, IEC60598-1-2008 and etc. It artificially simulates the dust environment to test the dust-proof ability of the test samples. The test device is suitable for electrical products’ sand and dust test of...
Guangzhou HongCe Equipment Co., Ltd.
|
SUS304 Stainless Steel High Pressure Jetproof Test Chamber with IEC60529 ISO20653 Compliance and 8000-10000 Kpa Pressure
|
...IPX69K high temperature and high pressure jet spray test chamber is designed according to IEC60529, DIN40050-9 figure 7 and ISO20653 figure 8 and 9 standards. This equipment performs IPX5, IPX6, IPX6K and IPX9K testing with user-defined parameters via a...
Pego Electronics (Yi Chun) Company Limited
|
IPX3–IPX6 Waterproof Test Chamber Rain & Jet Spray Testing Equipment for Auto Parts
|
...(IP Code)> IPX3,IPX4, IPX5 and IPX6 test, figures 5 and figure 6. Product Overview The IPX3–IPX6 Waterproof Test Chamber is specially designed to evaluate the water resistance performance of products under simulated rain and jet spray conditions,...
Sinuo Testing Equipment Co. , Limited
|
Heat insulation design, energy-saving box, anti deformation CCT Cycle Corrosion Test Chamber
|
... humidity---95%~100%RH Drying mode: Room temperature range---+70℃ Humidity control mode: humidity range see figure below Design Advantages: 1...
DongGuan Q1-Test Equipment Co., Ltd.
|
5000hrs Insulators Accelerated Aging Test Chamber IECIEC62217-2012
|
...Test Machine 1. Test sample: Two test insulators of the same design with a creepage distance between 500mm and 800mm, 2. Procedure: Conduct the test in a sealed, damp, and corrosion-resistant test chamber, with a volume not exceeding 20M3. Figure B1 is a schematic diagram of this test chamber......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|