4J36 Rod Invar Alloy Bar Fe Ni Alloy Controlled Expansion Material
|
...4J36 alloy rod, also known as Invar 36, is a low expansion Fe-Ni alloy containing about 36% nickel. It is widely recognized for its extremely low coefficient of thermal expansion (CTE) around room temperature. This property makes 4J36 ideal for applications requiring dimensional stability under temperature fluctuations, such as precision instruments, measuring devices, aerospace, and cryogenic engineering. Key Features Fe-Ni...
Huona (Shanghai) New Material Co., Ltd.
|
Low Expansion Ferro Nickel Alloy Invar 36 Bar Round Rods FeNi36 /4J36
|
... notable for its uniquely low coefficient of thermal expansion (CTE or α). 4J36 (Invar) is used where high dimensional stability is required, such as precision instruments, clocks, seismic creep gauges, television shadow-mask frames, ......
BLOOM(suzhou) Materials Co.,Ltd
|
Nilo 36 Low Expansion Alloy 4J36 Bar Strip Wire Readily Weldable
|
...below this point, 4J36 is magnetic and the expansion rate is very low. And when the temperature goes above this point, it becomes non-magnetic and the expansion rate goes bigger. Chemical composition Element C P S Si Mn Ni Fe Weight(%) 0.05 max 0.020 max 0...
Suzhou Xunshi New Material Co., Ltd
|
Invar 36 bar UNSK93600 ASTM F1684 Nilo 36 wire low expansion coefficients
|
... l-23011 CL7UNS K93602/03 Alloy 36 (Invar) / K93603 / ASTM F1684 Widely known under several trades names such as Invar* and Nilo 36**, this grade is a 36% nickel-iron alloy. It exhibits a near zero rate of thermal expansion from around 100oC up to 200oC....
JINXING MATECH CO LTD
|
Precision Alloy Invar 36 Rod FeNi36 4J36 Alloy Bar 3.0 - 50.0mm Diameter
|
... range of temperature. It has a low coefficient of expansion from cryogenic temperatures to about 260℃. In the dry air at home temperature, invar 36 has good resistance to corrosion. But in moist air, it may go corrosion. Invar 36 is suitable for the...
Shanghai Tankii Alloy Material Co.,Ltd
|
4j36 Round Bar 4J36 Invar Alloy Bar with ASTMUNSK93600 W. Nr.1.3912 Bright Bar
|
...4J36 ASTM F1684/ ASTM B753 UNS K93600 W.Nr.1.3912 BS X1NiCrMoCu AFNOR Fe-Ni36 Chemical composition: Alloy % Ni Cr Fe C Mn Si Co Mo P S Invar 36 Min. 35 Balance Max. 38 0.5 0.1 0.06 0.35 1.0 0.5 0.02 0.025 Mechanical properties: Density 8.1 g/cm3 Melting point 1430 °C Characteristic as below: 36 alloy......
JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
|
asme sb649 ASTM B649 UNS N08031 alloy 31 round bar rod
|
...Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire The material shall be supplied in the solution-treated or in cold drawn condition as required. Heat treatment shall be waived for forging quality material. Nickel Alloy Bars - Nickel Alloy Wires - Nickel-Chromium-Molybdenum Alloys......
AW SUNNY STEEL
|
ASTM B335 Alloy B / B-2 / B-3 Nickel Alloy Steel Square Bar , square metal rod
|
...Alloy B / B-2 / B-3 Nickel Alloy Square Bar Alloy B Chemical composition: % Ni Mo Fe Co Cr C Mn Si P S V min balance 26.0 4.0 - - - - - - - 0.20 max 30.0 6.0 2.5 1.00 0.050 1.00 1.00 0.040 0.030 0.40 Alloy B-2 Chemical composition: % Ni Mo Fe Cr Co C Mn Si P S min balance 26.0 - - - - - - - - max 30.0 2.0 1.00 1.00 0.020 1.00 0.10 0.040 0.030 Chemical composition % Ni Mo Ni+Mo Cr Fe......
Jiaxing MT stainless steel co.,ltd.
|
Tungsten alloy billet,rod, bar, dart barrel,blank,semi-finished product,cutter bar,knife
|
Introduction of Tungsten Alloy billet for dart Billets are actually tungsten cylinder rods after surface grinding by center-less processing, and their weights are varied from different tungsten contents and rod sizes. Usually we provide products according......
Mudanjiang North Alloy Tools Co., Ltd.
|
AZ31 , AZ61 , AZ80 , Magnesium Alloy Extruded Rods / Bars / Billet
|
...Alloy Extruded Rods / Bars / Billet Details: Name: magnesium alloy bar,dissolvable magnesium bar. Hilbo magnesium alloy material Co., Ltd. Quality Inspection Report NO:JB/MS03-150-1880 Model Specifications Process Furnace No. Chemical Composition (%) Low power test Al Zn Mn Fe Si Cu Ni Mg Low power Surface quality Size Ø80*1000 Extrussion 9537 6.5 0.83 0.40 0.005 0.1 0.05 0.005 Balance OK OK OK AZ61A Magnesium alloy...
Dongguan Hilbo Magnesium Alloy Material Co.,Ltd
|
Submit your “fe ni alloy invar 4j36 bar” inquiry in a minute :