AS/NZS 1530.3 Ingitability Testing Equipment Heats Samples Via A Gas Radiant Plate And Calibrate
|
...samples via a gas radiant plate and calibrate with a heat flow meter. Test sample is placed in a vertical position, near the radiation plate, exposed in a clear area calibrated radiation flux.Close to the pilot flame is assembled with the test sample, but not in contact with the test sample.After ignition, it can record ignition......
Dongguan Chengfeng Testing Equipment Co., Ltd
|
AS/NZS 1530.3 Ingitability Testing Equipment For Fire Tests On Building Materials
|
...Testing Equipment is designed according to AS/NZS1530.3. The equipment heats samples via a gas radiant plate and calibrate with a heat flow meter. Test sample is placed in a vertical position, near the radiation plate, exposed in a clear area calibrated radiation flux.Close to the pilot flame is assembled with the test sample, but not in contact with the test sample.After ignition, it can record ignition...
Advanced Instruments Co.,Limited
|
Lab Testing Equipment Flame Temperature Calibration Device 50W
|
...combustion test equipment. Calibration Procedure Position the copper block 10±1mm above the needle flame burner. Ignite the flame; the time for the copper block temperature to rise from 100°C±2°C to 700°C±3°C must be 44±2 seconds to validate the...
Hai Da Labtester
|
ASTM D1929 Ignition Temperature Testing Equipment For Plastic Sample
|
...Ignition Temperature Testing Equipment For Plastic Sample Intruduction Plastic ignition temperature tester according to GB4610-2008 plastic hot air furnace method of determining the ignition temperature plastic ignition temperature tester design and manufacture, in full compliance with GB4610-2008, while meeting the requirements of ISO871-2006 standards, used to assist in testing......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
ISO 5657 Flammability Testing Equipment Radiant Heat Source Ignitability Of Building Products
|
...is capable of testing any sample of size 165mm x 165mm and up to a maximum of 70mm thick, and measures the ignition characteristics of exposed surfaces of essentially flat materials and specimens. Standards: - ISO 5657 Features: - The sample orientation is...
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
IEC 60601-1 Oxygen Rich Environment Spark Ignition Test Chamber For Spark Ignition Test
|
... and restrictions: Medical device boards or devices in oxygen-rich environments 3. Application: It is used for spark ignition test of medical device boards or devices in oxygen-rich environment, and is used to evaluate the fire risk of its equipment under...
Sinuo Testing Equipment Co. , Limited
|
45 degree Flammability Tester Toys Testing Equipment to check flammable performance of the textile
|
... room with glass window,after ignition automatic time (0.01 second precision) automatic or manul ignition. Manual firing device, including sample holder and brushing device. Parameters: Manual firing device, including sample holder and brushing device....
Dongguan Hust Tony Instruments Co.,Ltd.
|
IEC60335-2-17 Figure 112 Spark Ignition Test Apparatus For Testing Flame Resistance
|
IEC60335-2-17 Figure 112 Spark Ignition Test Apparatus for Testing Flame Resistance of Flexing Parts 1. Introduction The spark ignition test apparatus meets the requirements of IEC60335-2-17 clause 30.101 and figure 112. It’s used for the flame resistance ......
Pego Electronics (Yi Chun) Company Limited
|
UL 746A High Current Arc Ignition Combustion Testing Equipment
|
... – Use in Electrical Equipment Evaluations" clause 49 UL 498 "Attachment Plugs and Receptacles" clause 114 IEC 60950-1 “Information technology equipment - Safety - Part 1: General requirements” ...... Equipment Overview Samples and Restrictions:...
Sinuo Testing Equipment Co. , Limited
|
ASTM D1230 45 Toys Testing Equipment Degree Automatic Flammability Testing Equipment
|
...Testing Equipment Description 45 degree flammability tester, check the flammable performance of the textile Stainless testing room with glass window, after ignition automatic time (0.01 second precision) automatic Parameters Manual firing device, included sample holder and bush. Spread time scope 0-99.99s, Firing time: 1s or specified, resolution: 0.01s Igniter......
SKYLINE INSTRUMENTS CO.,LTD
|
Submit your “calibrated ignitability testing equipment for samples” inquiry in a minute :