9508H One-Component Heat-Curing Type TC >8.0 W/M·K Excellent Workability Low Static / Transient Stress On Substrates
|
9508H TDS-EN.pdf 9508H is one-component Heat-curing type; TC >8.0 W/M·K; Excellent workability and Low static/transient stress on substrates Product Description Light green gel One-component heat-curing type Silicone thermal conductive composite Product Features: High thermal conductivity ＞8W/m∙K Excellent workability Low static/transient stress on substrates High reliability under various conditions 9508H......
Shanghai Huitian New Material Co., Ltd
|
Industrial Hot Air Electrical Drying Heating Curing Oven For Electrical Components
|
...t is evenly distributed by a circulation system, all while maintaining a clean environment through features like air filtration and sealed construction to prevent contaminants from entering during heating, drying, or curing processes. 2. Application The...
Wuxi Wondery Industry Equipment Co., Ltd
|
Heat Curing Silicone Epoxy Potting Compound Material For Encapsulation Connectors 2 Component Epoxt Potting Material Customization Acceptable
|
Heat Curing Silicone Epoxy Potting Compound Material For Encapsulation Connectors 2 Component Epoxt Potting Material Customization Acceptable Product descriptions: HN-5508 epoxy resin at room temperature or low temperature, with low viscosity, long ......
Shenzhen Hanast New Material co.,LTD
|
Dowsil Tc-6020 is Two-Component Heat Conductive Potting
|
...component liquid silicone rubber (A/B ratio 1:1) Thermal conductivity: 2.72 W/m · K Viscosity: 10800 cP for component A/9960 cP for component B before mixing Curing method: room temperature curing or heating accelerated curing (60-100 ° C) Product Introduction DOWSIL™ TC-6020 is a two-component......
Shenzhen Huazhisheng New Material Technology Co., Ltd.
|
Heat Curing Solvent Based Offset Printing Ink Environment Friendly
|
...: Solvent Based Ink Printing Type: Offset Printing Ink Drying: Heat Curing Performance: Suitable Print Speed: 8, 000-10, 000 Rph Component: Pigment, Vehicle and Modifier Setting Time: 4 Minutes Type ECOO-INK-F Features Printing speed: 8,000rph-10,000rph ......
Hangzhou Ecoographix Digital Technology Co., Ltd.
|
Stable Fiber Optic Components Uniform Heating Bake Oven Machine Connector Heat Opatch Cord Fiber
|
Tool kit Uniform Heating Bake Oven Machine Connector Heat Opatch Cord Fiber Curing Oven Fiber Optic Components 1, Overview: Fiber curing furnace is a professional adhesive fiber heat curing of a device is a necessary equipment for production of optical ......
Shenzhen Hicorpwell Technology Co., Ltd
|
Low Shrinkage One Component Thermal Epoxy Glue For Electronic Product Encapsulation
|
...heat cured epoxy adhesive for bonding two parts of electronics Product Summary: TIE™380-45 is a one component, heat cured epoxy adhesive. It has excellent thermal conductivity and bond strength. TIE™380-45 is a good choice for high speed production lines because it has the rheology to allow stencil printing and a fast, one component, heat cure......
Dongguan Ziitek Electronical Material and Technology Ltd.
|
Waterproof RTV Heat Resistant Silicone Adhesive For Car Engine
|
... moisture. It is resistant to oil, sewage, antifreeze and automatic gear oil It features fast curing, sensor safe, low odor and non-corrosive. No corrosion, good adhesion to engineering plastics such as aluminum, copper, stainless steel and other ......
Foshan Kingdeli Viscose Co., Ltd.
|
One Component Epoxy Thermal Conductive Adhesive 2.5 W / m - K High Performance Gray Solid Appearance
|
...Component Epoxy Thermal Conductive Adhesive 2.5 W / m - K High Performance Gray Solid Appearance TIE™380-25 is a one component, heat cured epoxy adhesive. It has excellent thermal conductivity and bond strength. TIE™380-25 is a good choice for high speed production lines because it has the rheology to allow stencil printing and a fast, one component, heat cure......
Dongguan Ziitek Electronic Materials & Technology Ltd.
|
100 Ports Epoxy Fiber Optic Curing Oven For ST FC SC LC SMA Connectors
|
... is suitable for fiber optic connector manufacturers, used for heating and curing all kinds of fiber optic connectors.It can simultaneously cure 100 core joints and 42 integrated joints at one time respectively.Adopt Japanese electronic component control,...
Shenzhen Chuanglixun Optoelectronic Equipment Co., Ltd.
|
Submit your “9508h one component heat curing” inquiry in a minute :