IEC 60332 Single Cable Vertical Flame Tester , 45degree Flame Spread Test Machine
|
...Flame Spread Tester Description: Single Cable Vertical Flame Spread Testing Machine is the most widely used and lower cost of cable fire performance test equipment; It meets the standards IEC 60332-1-1:2004 in the provisions of technical indicators and requirements. Single cable combustion Tester is used to test the flame......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
ISO 15025 BS EN 469 Vertical Textiles Flame Retardancy Test Machine ISO 11612 Fabric Burning Tester Flammability Test Device
|
... Textiles Flame Retardancy Test Machine ISO 11612 Fabric Burning Tester Flammability Test Device Product Overview The fabric flame retardancy tester is designed to determine the vertical-orientation burning behavior of materials requiring flame retardancy......
DONGGUAN LONROY EQUIPMENT CO LTD
|
ASTM E162 Radiant Panel Flame Spread Test Machine ASTM D3675 For Building Materials
|
... Panel Flame Spread test Machine ASTM D3675 Radiant Panel Flame Spread Tester Product Introduction: ASTM E162 is one of the standard methods widely used in the United States to test the flame propagation performance of materials. Its testing principle ......
Chongqing gold mechnical and electrical equipment Co., Ltd
|
ISO 5658-2 Lateral Flame Spread Testing Equipment For Walls Surfaces by ASTM E 1317
|
... spread rate of flame, flame for ignition by distances, CFE (Critical Flux at Extinguishment) and total heat release. This test method is originated from ISO 5658-2 (Reaction to fire tests Spread of flame- Part 2 Lateral spread on building products in...
Advanced Instruments Co.,Limited
|
BS476-7 Surface Flame Spread Test Apparatus
|
...Flame Spread Test Apparatus BS476-7 Product introduction: The flame spread tester is developed and produced according to the BS476-7 standard, and is used to measure the lateral flame spread performance of building products. The speed of flame spread performance/flame spread......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Radiant Plate Flame Spread Testing Machine For Building Surface Materials ASTM E162
|
... Spread Tester uses gas-fired radiant panels to test the flammability of building surface materials (ASTM E162) and foams (ASTM D3675). The Flame Spread Index (IS), which is determined by factors such as flame spread and heat dissipation. It is used as a...
Dongguan Chengfeng Testing Equipment Co., Ltd
|
Vft ISO 15025 Flexible Materials Vertical Flame Spread Test Apparatus
|
...Flame Spread Test Apparatus Introduction: VFT ISO 15025 Flexible Materials Vertical Flame Spread Test Apparatus is suitable for the measurement of limited flame spread properties of protective clothing. The flame from the burner is applied for 10 s to the surface or the bottom of textile specimens which are vertically oriented. Features: VFT ISO 15025 Flexible Materials Vertical Flame Spread Test...
Delta Technology (Chongqing) Co., Ltd.
|
Surface Flammability Test Equipment , HTB-048 Radiant Panel Flame Spread Test Apparatus
|
..., or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire-hazard or fire-risk assessment of materials, products, or assemblies under actual ......
Dongguan Hust Tony Instruments Co.,Ltd.
|
120KG Flame Spread Testing Device For Suit Clothing EN 367 ISO9151 Standards
|
... (TPI) or other terms used in previous versions of this test. Heat transfer index is calculated from the mean time in seconds to achieve a temperature rise of 24±0.2℃when testing by this method using a copper disc and a starting temperature of 25±5℃....
DONGGUAN YUYANG INSTRUMENT CO.,LTD
|
Vertical Flame Spread Testing Equipment For Textiles With Horizontal Burner Angle And Industrial Fuel Gas
|
Vertical Flame Spread Tester for Textiles Description: Vertical Flame Spread Tester for Textiles evaluates the vertical flame spread properties of textiles in accordance with GB/T 5456-2009 and ISO 6941. It measures flame propagation on vertically oriented......
Guangdong Haida Equipment Co., Ltd.
|