VersaMax IC200ALG264 GE 16 Channel Analog Input Module With 15 Bit Resolution

1. Product Snapshot

2. Key Features & Benefits

• 16 single-ended or 8 differential inputs – software selectable, 4 – 20 mA default
• 15-bit resolution – < 0.1 % full-scale accuracy, ±0.05 % linearity
• Built-in 24 V transmitter supply – 24 VDC @ 200 mA total, short-circuit protected
• Open-wire & short-circuit detection – diagnostic bit raised within 1 ms
• 250 µs per-channel update – 4 ms for all 16, scalable averaging filter 1 – 64 samples
• Differential mode – 300 V AC common-mode rejection for noisy plants
• Hot-swap ready – insert/remove under power when used with IC200CHS002/005 carriers
• Global certs – CE, UL 508, CUL, RoHS; –40…+85 °C storage

3. Technical Specifications

4. Typical Applications

• Water-treatment flow & pressure transmitters
• Packaging line drive feedback (0 – 20 mA)
• HVAC valve position (4 – 20 mA)
• Oil & gas well-head choke position
• OEM skids needing 16 loops in 110 mm width

5. Compatible Carriers

• IC200CHS002 – box-style screw terminals (most popular)
• IC200CHS005 – spring-clamp version for vibration zones
• IC200CHS001 – barrier-style for extra isolation

6. Installation & Wiring Tips

1. Use shielded twisted-pair – connect shield at panel entry only.
2. Torque terminals to 0.4 N·m – over-tightening may crack housing.
3. Maintain 25 mm clearance above module for hot-insertion.
4. Verify transmitter burden – total loop resistance ≤ 750 Ω (module 250 Ω + wire + supply).
5. Enable 24 V supply in software if loop-powered transmitters are used.

7. Software Configuration (Proficy Machine Edition)

• Select range per channel: 4 – 20 mA, 0 – 20 mA, 0 – 24 mA
• Set temperature unit °C or °F; enable 50/60 Hz noise rejection
• Choose filter depth 1 – 64 samples for noisy environments
• Map diagnostic bits to %I or %M for open-wire alarms

8. What’s in the Box?

• 1 × IC200ALG264 analog module, factory-sealed
• 1 × quick-start card (English)
• 1 × terminal torque label