VBA Series Energy Saving Compact type Booster Regulator

Assuming an intake pressure of 0.5MPA and a required boost to 0.8MPA, with an average air flow rate of 500L/Min, based on the boost ratio and pre selected flow rate of VBA20A, comparing the flow characteristics of 20A, the intake P1=0.5MPA. When the air consumption is equal to 500L/MIN, the intake pressure is around 0.85MPA, which is higher than the predetermined 0.8MPA and meets the design requirements. Therefore, the VBA20A model is selected for use
Assuming that the intake pressure is 0.5MPA, it is required to increase the pressure to 0.8MPA, and the average air flow rate is 50OL/Min. The outlet pressure should not fluctuate
Based on the selection results of Example 1, the VBA20A model was chosen because the booster valve is based on the piston type boosting principle, and the outlet pressure will have periodic pulsation. Therefore, a small air storage tank was selected to filter the pulsation. Since there are no special requirements, the air storage tank can be selected based on the on-site situation. Now, a 10L air storage tank is selected as the matching tank
Other selection cases
If the booster valve is used for periodic gas consumption, or if there are requirements for inflation time when inflating sealed containers, you can contact customer service for assistance in selection reference
The function of gas cylinders
Relieve pressure fluctuations at the outlet of the pressure boosting valve
In situations where intermittent movements cause air consumption to exceed supply capacity, concentration can be used
The amount of air consumed is stored in a gas tank for use. If it is caused by continuous actions
If the air consumption exceeds the supply capacity, using gas cylinders will not be effective.
Precautions for using gas cylinders
one
An oil mist separator needs to be installed on the side near the booster valve. If the quality of compressed air is not guaranteed, it will result in poor operation of the booster valve (unable to boost) and reduced durability.
two
In situations where dry air is used (atmospheric dew point below 17C), the lifespan may be shortened due to the evaporation of internal lubrication.
three
The supply on the inlet side is approximately 2 times (boost ratio 2) or 4 times (boost ratio 4) the usage on the outlet side, as the boost valve is powered by air pressure. Therefore, the supply on the inlet side should be the sum of the flow rate on the outlet side and a portion of the discharge from the E port.
four
The setting of export pressure should be more than 0.1MPA higher than the inlet pressure. If the pressure difference is below 0.1MPA, it will cause unstable movement and poor movement.

NINGBO SANMIN IMPORT & EXPORT CO.,LTD. was established in 2014.Our company is mainly engaged in instrumentation, pneumatic and hydraulic industry accessories and services, has more than 10 series of core products.Focusing on the production of automatic machinery to provide a variety of options, products have a wide range of applications.

Sanmin is an industrial and trade enterprise, has a strict quality control system from material selection, inspection workshop, product testing, production, inspection, packaging design to shipment.At present, the company's trade scale is expanding day by day, the customers spreads over more than 20 countries.

We are strictly abides by Chinese laws and regulations, and has won the trust of customers at home and abroad with good reputation. Welcome to telephone and send E-mail to communication, sincerely cooperate, and seek common development.

Supply Original FESTO,SMC,CKD,NORGEN,MARSH,BELLOFRAM,BELGAS,MUELLER,SBFEC.

NINGBO SANMIN IMPORT AND EXPORT CO.,LTD.

INA CHEN

Whatsapp/wechat: +86 15168536055

Desk phone :+86 0574 88915660

Skype: fhtrust

INA@PNEUHYDR.COM