| Impedance | 75 Ohms |
| Frequency Range | 0-6 GHz |
| VSWR (f = GHz) for Straight Cabled Connectors (RG-179 cable) | 1.13 + .04f |
| Working Voltage (Vrms maximum) for RG-179 (Sea Level) | 335 Vrms |
| Dielectric Withstanding Voltage (VRMS minimum at sea level) for
RG-179 | 1000 VRMS |
| Corona Level (Volts minimum at 70,000 feet) for RG-179 | 250 Volts |
| Insertion Loss (dB maximum, tested at 1 GHz) for Straight cable
connectors | 0.1 dB |
| Insulation Resistance | 10,000 megohms minimum |
| Contact Resistance (milliohms maximum) - Center contact (straight
cabled connectors, uncabled receptacles) - After Initial
Environmental | 5.0 |
| Contact Resistance (milliohms maximum) - Outer contact - After
Initial Environmental | 1.0 |
| Contact Resistance (milliohms maximum) - Braid to body (gold plated
connectors) - After Initial Environmental | 1.0 |
| RF Leakage (dB typical tested at 2.5 GHz) for Cable connectors | -55 dB typical |
| RF High Potential Withstanding Voltage (Vrms minimum, tested at 4
and 7 MHz) for RG-179 | 700 Vrms |
| Engagement Design | Compatible with CECC 22220, Series MCX 50 Ohm |
| Engagement Force | 5.6 pounds maximum axial force |
| Disengagement Force | 8 pounds maximum axial force, 1 pound min. |
| Contact Retention | 2.3 pounds min. axial force (captivated contacts) |
| Cable Retention (Axial Force) for Connectors for RG-179 | 20 pounds |
| Durability | 500 cycles minimum |
| Temperature Range (All connectors) | -65C to +165C |
| Material - Bodies | Brass per QQ-B-626, gold plated** per MIL-G-45204 .00001 min. |
| Material - Interface spring | Beryllium copper per QQ-C-530, gold plated per MIL-G-45204 .00003"
min. |
| Material - Contacts (Female) | Beryllium copper per QQ-C-530, gold plated per MIL-G-45204 .00003"
min. |
| Material - Insulators | PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457 |
| Material - Expansion Caps | Brass per QQ-B-613, gold plated per MIL-G-45204 .00001" min. |
| Material - Crimp Sleeves | Copper per WW-T-799, gold plated per MIL-G-45204 .00001" min. |
| Material - Mounting Hardware (nuts) | Brass per QQ-B-626, gold plated per MIL-G-45204 .00001" min. |
