This is a handheld device for drone detection and neutralization. Through radio sensing and jamming technologies, it detects and identifies commercial drones, as well as finds drone direction, locates drones and pilots and jams drone signals. It comes with a screen to display real-time drone information. PC1 works independently offline or with multiple devices networking to cover a larger area. It's able to transmit its location back to a management platform.

1. Full Coverage of Drone Models: Capable of identifying and detecting common brand drones such as DJI, Autel, Dahua and Yuneec, as well as the self-assembled FPV and WiFi drones.
2. Portable & Mobile: Adopts a handheld design for easy carrying and rapid deployment.
3. Detachable Battery Design: The battery features a detachable structure for quick replacement, which helps extend the device’s battery life.
4. Backpack-Mounted Design: Shoulder strap is reserved at both ends of the product, allowing the installation of a shoulder strap as needed for backpack-style carrying.
5. Dual Power Charging Modes: The device can be directly charged via a power cable, or the battery can be removed for separate charging.

1. Integrated Design: This product integrates detection, direction finding, localization and countermeasure capabilities. After detecting and locking the position of the target drone, it can immediately activate countermeasure modes (repelling and spoofing) to achieve effective disposal of the target.
2. Drone Localization: Capable of locating the target drone, and displaying real-time drone position (block information), direction information and distance information (the distance between the drone and the device location).
3. Pilot Localization: Capable of locating the drone pilot, and displaying real-time pilot (remote controller) position (latitude and longitude or block information), direction information and distance information (the distance between the pilot and the device location).
4. Direction Finding: Enables detection and direction finding of target drones, and presents drone direction information via radar charts or signal strength comparison.
5. Intrusion Alarm: The device will issue an alarm prompt when detecting drone intrusion.
6. Identity Recognition: Upon startup, the device enters detection mode. When a target drone is detected, it will display drone model, frequency (supporting real-time frequency hopping display), signal strength and other information in the detection list.
7. Countermeasure Status Display: The main interface of the device can display the currently activated countermeasure status in real time.
8. Blacklist & Whitelist: A whitelist can be configured; the system will not issue an alarm when detecting drones on the whitelist.
9. RID Monitoring: Equipped with Remote ID monitoring function, supporting multiple standard protocols.
10. Data Transmission: The device can transmit detection and other relevant data to the backend management and control platform via wireless network.
11. Networked Localization: With wireless network access function, it can transmit device location, detection and countermeasure status information to the management and control platform, supporting unified dispatching and management of multiple devices in large areas.
12. Language Switching: The device supports one-click switching of display languages (supporting five languages).
13. Automatic Warehousing: Real-time warehousing is available for newly detected WiFi-enabled drones.
14. Pan-Tilt Mounting [Optional]: The optional pan-tilt can be used for rapid deployment to complete fixed-point setup.