Name: FL101 clamp on flow meter for oil
Brand: Flo-Instru
Price: 1 USD

Product Details
Company Profile

FL101 clamp on flow meter for oil

FL101 Clamp On Flow Meter for Oil

Product Overview

The FL101 In-Line Ultrasonic Flow Meter is specially designed for measuring the flow of various liquids in pipelines, enabling real-time flow measurement in production processes. The instrument outputs digital signals, analog signals, and more to facilitate measurement and control of production processes.

With industrial upgrading requirements demanding richer outputs for automation, traditional flow meters with simpler outputs often fall short. Flo-Instruments addresses this with an in-line flow meter featuring full straight pipe design without pressure loss, double union connection, and simple installation.

Key Benefits

Advanced Measurement

Built-in advanced measurement chip with time resolution up to 20ps

Four-line OLED display showing date, signal, instantaneous, and accumulated data

Clear visibility in low light and dim environments

User-Friendly Interface

Innovative drop-down list menu method

Four touch buttons for easy setup

Simplified Chinese, Traditional Chinese, and English language switching

Robust Construction

IP66 protection rating

Injection molding structure

Double union connection for easy and reliable installation

Product Dimensions

Model	Nominal Pipe Diameter	L	A	B	C	D
PVC-U-20	DN15	146	182	53.5	93.7	20
PVC-U-25	DN20	149	189	57.3	98.2	25
PVC-U-32	DN25	157	205	70	108	32
PVC-U-40	DN32	157	211	83	118.5	40

Unit: mm

Note: "L" is the length of the pipe section cut off during installation; "D" is the outer diameter of the installed pipe section.

Compatible Media

Since its market introduction, this product has been widely used in the cleaning equipment industry. Due to its simple installation, operation, and reliable measurement performance, it continues to expand into new industries.

Main industries: semiconductors, food, medicine, drinking water, detergents, printing and dyeing, chemical products, etc.

Measured Media Examples:

Dilute sulfuric acid
Liquor
Hydrocarbon
Alcohol
Sodium chloride
Sodium carbonate
Triethylamine
Ethylenediamine
Propylene oxide

As the market expands, we continue to discover new measurable media. We encourage users to share applications to help us continuously enrich and improve our products.

Measurable Media Criteria:

Stable flow rate in the pipeline
Pressure maintained at 0.3MPa
No bubbles (cavitation) generated due to flow

Many more media have been measured - welcome to consult for specific applications.

Technical Specifications

Product Name: FL101 In-line Ultrasonic Flow Meter

Accuracy: ±1.0% (0.3m/s~5.0m/s)

Flow Velocity: 0.1m/s~10.0m/s

Linearity: ±1.0% (0.3m/s-5.0m/s)

Repeatability: 0.40%

Response Time: 500ms

Screen Display: 1.54" 240*240 IPS LCD 360° rotation

Menu Language: Simplified Chinese/Traditional Chinese/English

Display Unit: Supports metric and imperial unit selection

Display Data: Instantaneous flow, flow velocity, cumulative volumes

Totalizer: 7-digit flow totalizer

Cumulative Data: 10 years 64 months 64 days

Operation Key: Four touch buttons

Calendar Battery: CR1220

Power Supply: 24VDC@3W

Analog Output: 4-20mA, maximum load 600Ω

Communication Interface: RS485, support ModBus RTU protocol

Relay Output: (Optional) 30VDC@1A

Media: Water, solutions, chemical reagents (impurities ≤ 4%), etc.

Protection Level: IP66

Installation Method: Pipe sections integrated, PVC-U pipes connected by unions

Pipe Size: OD20 (DN15-½"), OD25 (DN20-¾"), OD32 (DN25-1"), OD40 (DN32-1½")

Pipe Section Material: UPVC

Media Temperature: 0°C-60°C

Working Temperature: -10°C-50°C

Ambient Humidity: Relative humidity 0%-95%, no condensation

Applicable Viscosity: <300CST (mm²/s)

Cable Length: Standard: 2m(6.6ft), extendable to 20m(66ft)

Installation Guide

Step 1: Cutting the Pipe

According to installation point selection requirements, cut a section of the pipe at the installation location.

Step 2: Insert Nuts into Pipe

Unscrew the two nuts from the meter and insert them into the pipe.

Step 3: Glue Pipe Joints

Apply PVC glue to the two pipe joints on the instrument and plug them into the pipes.

Step 4: Install Flow Meter

Place the meter in the middle and tighten the nut to complete installation. Pay attention to flow direction during installation.

Step 5: Power On and Run

Connect the other end of the cable to a 24V DC power supply, power on and observe operation.

Package Contents

Ordering Information

FL101	Code	Pipe Size Range [DN & Inch & OD]
	A	DN15 \| 1/2" \| OD20
	B	DN20 \| 3/4" \| OD25
	C	DN25 \| 1" \| OD32
	D	DN32 \| 1-1/4" \| OD40

Code	Output Mode
1	4-20mA, RS485, Relay

Code	Cable Length
L	6.6ft(2m) - Default if no choice specified
L+	Other lengths available on request

Complete Ordering Example: FL101 | A | 1 | L

Product Tags:


*From:	Your email address is incorrect!
*To:	Flo-Instruments Co., Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Clamp-on Ultrasonic Flowmeter
Model Number:	FL101
Communication Interface:	RS485, support Modbus RTU protocol
MOQ:	1
Pipe Diameter Range:	OD20,OD25,OD32,OD40
Brand Name:	Flo-Instru
Power Supply:	24V DC
Delivery Time:	3-5 working days
Payment Terms:	T/T
Display:	1.54’’ 240*240 IPS LCD 360° rotation
Packaging Details:	Conventional Packaging
Certification:	ISO:9001, CE
Flow Range:	0.1m/s ~ 10m/s
Place of Origin:	Shenzhen, China
Accuracy:	±1.0%

FL101	Code	Pipe Size Range [DN & Inch & OD]
	A	DN15 \| 1/2" \| OD20
	B	DN20 \| 3/4" \| OD25
	C	DN25 \| 1" \| OD32
	D	DN32 \| 1-1/4" \| OD40

FL101 clamp on flow meter for oil

FL101 clamp on flow meter for oil

FL101 clamp on flow meter for oil

24V DC Power Supply Clamp-on Ultrasonic Flowmeter

RS485 Communication Interface In-line Ultrasonic Flow Meter

±1.0% Accuracy FL101 Flow Meter

FL101 clamp on flow meter for oil