Single Girder Electric Wire Hoist With Modular design European Style 16T 18M

Single Girder Electric Wire Hoist With Modular design European Style 16T 18M

1. Electrical control system:

Complies with the standards of the International Electrotechnical Commission (such as IEC).

The protection level is usually IP55 or higher, which can effectively prevent dust and splash water and adapt to harsh industrial environments.

The standard configuration is usually 380V/400V, 50Hz three-phase AC (commonly used in China), and other voltages/frequencies can be customized according to requirements.

Flexible control method: can be equipped with a flashlight (hanging button box), remote control (wireless or wired) or operated in the driver's cab.

Lifting speed: The standard configuration is usually single speed (such as about 3-4 m/min), but it is more common and practical to configure dual speed (normal speed + slow speed, such as 4 m/min + 0.8 m/min) or variable frequency speed regulation to achieve more accurate hoisting positioning and soft start/stop.

2. Complete safety devices (compliant with CE and other requirements):

Overload protection: Overload is usually prevented by electrical systems (such as thermal relays) or mechanical overload limiters (more reliable, directly cutting off the lifting power).

Upper and lower limit switches: Mechanical or electronic limit switches that automatically cut off the power supply of the lifting motor when the hook reaches the highest or lowest limit position to prevent top or excessive lowering.

Emergency stop button: A conspicuous emergency stop button is provided on the control device (flashlight/remote control) to cut off the main power supply in an emergency.

Phase sequence protection/phase loss protection: Prevent the motor from being damaged by the wrong phase sequence of the power supply or phase loss operation.

Brake wear monitoring (optional): Advanced models may be equipped with a brake pad wear detection device.

Wire rope anti-loosening protection (optional): Prevent excessive relaxation of the wire rope when the hook is empty or without load.

3. Working level and application:

European hoists are usually designed for higher working levels (such as FEM 1Am, 2m, 3m or M4, M5, M6). 16 tons 15 meters configuration is often used in occasions with medium frequency of use and load rate