Product Details
Company Profile

FPV Video Receiver 1.7G VRX Support FPV Goggles for FPV VTX Analog Receiver Module

FPV Video Receiver 1.7G VRX Support FPV Goggles for FPV VTX Analog Receiver Module

I.Main Features

lChannels 8CH;

lSupport FatShark,Skyzone and other glasses VR headset display straight plug and analog

display and other connection use;

lHigh-sensitivity reception-97 dBm;

lEfficient DC/DC power input: 7-36V;

lSupport 5V voltage output;

lShort click switch channel;

II.Product Parameter

lReceiver (ground end):

lInput voltage:7-36V DC(2-6S)

lOutput voltage:5V/0.5A

lVideo system:PAL/NTSC

lNumber of channels:8 channels

lChannel selection:Short click switch frequency

lReceiving frequency: 1680-1960MHz

lSensitivity:-97 dBm(MAX)

lAntenna interface:SMA(outer screw inner hole)

lModulation type:FM

III.Transmitter operation and adjustment part:

1.Frequency table

CH1

1680

CH2

1720

CH3

1760

CH4

1800

CH5

1840

CH6

1880

CH7

1920

CH8

1960

2.Use a key to adjust the channel,short click switch channel,as shown in the figure below.

Channel control short press to switch the channel
frequency	CH1	CH2	CH3	CH4	CH5	CH6	CH7	CH8
channel	1680	1720	1760	1800	1840	1880	1920	1960
The green indicator light on	1	2	3	4	5	6	7	8

IV.Matters need attention:

lPlease install the antenna and then connect the power supply to avoid equipment failure;

lSelect the appropriate working frequency and set the transmitter to the same frequency as the receiving end(see the frequency table for details);

lThe input voltage is 7-36V(2-6S),do not use over the voltage range;

lThe output voltage current is 5V/0.5A.Please note that if the power is supplied to other equipment through the receiver output,the working current is limited to 0.5A.Do not use the voltage output end of the product over the 5V0.5A,otherwise the receiver may be damaged;

lBoth 5V and 5V-OUT are output terminals,do not connect to the power input terminal or the battery,otherwise it will cause damage.

FPV Video Receiver 1.7G VRX Support FPV Goggles for FPV VTX Analog Receiver Module

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Kimpok Technology Co., Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	FPV Video Receiver
Brand Name:	Kimpok
Model Number:	KP-R1700
Certification:	CE
Place of Origin:	China
MOQ:	1pcs
Price:	Negotiation
Payment Terms:	T/T, Western Union,Paypal
Supply Ability:	3000pcs/month
Delivery Time:	7 Working Days
Packaging Details:	International Standard Packing
Type:	Wireless Video Receiver
Video Format:	PAL/NTSC
Frequency:	1.7G VRX
Sensitivity:	-97 dBm(MAX)
Input Voltage:	7-36V DC
Channel:	8CH