Product Details
Company Profile

AZK Series Integrated Vacuum Generator

Features

◇ Energy-efficient nozzle design

◇ With energy-saving control device

◇ With normally open vacuum supply valve

◇ Small size and light weight. The volume is 85cm³

◇ Transparent filter housing

◇ Single body with L bracket, DIN guide rail installation for integrated

body, centralized air supply

Advantages

◇ Vacuum flow increased by 50% and air consumption decreased by 30%

◇ Air consumption reduced by 90%(compared with non-energy saving type)

◇ Power outage or power off does not affect vacuumproducing and prevent

the workpiece from falling

◇ The device is compact and can be installed directly in the handling system

◇ The cleanliness is visible and easy to replace

◇ Simple installation, can be installed directly on the distribution box

Applications

◇ Integrated vacuum generator for handling airtight and slightly

porous workpieces

◇ Vacuum producing and monitoring in automation systems

◇ For robot handling applications and linear axes

◇ Pick and place applications with very short time

◇ Used for systems that require high dynamic handling of workpieces

and with limited space

◇ Usually used for handling small parts in fully automated systems

Structure - With vacuum source type

(Vacuum generator type)

◇ (1) Vacuum supply valve

◇ (2) Vacuum release valve

◇ (3) Vacuum pressure switch

◇ (4) Vacuum release adjusting valve

◇ (5) Air supply port

◇ (6) Silencer

◇ (7) Vacuum port

◇ (8) Vacuum filter

◇ (9) DIN guide rail installation

Structure - Without vacuum source type

(Vacuum pump type)

◇ (1) Vacuum supply valve

◇ (2) Vacuum release valve

◇ (3) Vacuum pressure switch

◇ (4) Vacuum release adjusting valve

◇ (5) Air supply port

◇ (6) Vacuum pump connector

◇ (7) Vacuum port

◇ (8) Vacuum filter

◇ (9) DIN guide rail installation

How to order

AZK-S×8-NO-N-D
① ② ③ ④ ⑤ ⑥
①Series	②Specification	③Stack	④Control valve specification
AZK	S-Low vacuum level type	Nil-Single body	Nil -Supply valve NC+release valve NC
	X-High vacuum level type	2	NO-Supply valve NO+release valve NC (lead wire length 300mm,power supply DC24V)
	P-Low air supply pressure and high vacuum level type	3
		...
	L-Large flowtype	8
	B-Vacuum pump type
⑤Vacuum switch		⑥Bracket
Nil-Without vacuum switch		Nil -Single air supply,without bracket
N -NPN,without energy saving function		F -Single air supply,with bracket(single body)
P -PNP,without energy saving function		D -Single air supply,guide rail installation(integrated)
NE-NPN,with energy saving funcion		DP-Centra lized air supply,guide railinstallation(integrated)
PE-PNP,with energy saving function

◇ Note: 1. Only NE/PE are with check valve for energy saving, others are without check valve

2. Energy saving function is not optional for L-large flow type and B-Vacuum pump type

3. Centralized air supply is not optional for B-Vacuum pump type

Technical parameters

Model	Air supply Rat pressure range bar	ed air supply pressure bar	Max. vacuum level -kPa	Max. vacuum flow NL/min	Max. break flow rate NL/min	Air consumption NL/min	Noise level dB(A)	Without pressure switch	Weight g With pressure switch	Recom Air supply port P	mended hose d Vacuum pump connector	ia. (mm) Vacuum portV
AZK-S	3.0~6.0	6.0	74	44	60	26	65~70	88.5	102.5	φ6	-	φ6
AZK-X	3.0~6.0	5.0	91	41	54	29	65~70	88.5	102.5	φ6	-	φ6
AZK-P	3.0~6.0	3.7	88	40	46	32	65~70	88.5	102.5	φ6	-	φ6
AZK-L	3.0~6.0	5.0	90	68	48	85	74~80	102	114	φ6	-	φ8
AZK-B	3.0~6.0	-	-	35	-	-	-	101.5	113.5	φ4	φ6	φ6

◇ Note: 35NL/min is the max. allowed passing flow of AZK-B, AZK-L external silencer

Vacuum flow(NL/min) at different vacuum levels(-kPa)

Model	Air supply pressure bar	Air consumption NL/min	0	10	20	30	40	50	60	70	80	90	Max. vacuum level -kPa
AZK-S	6.0	26	44.0	38.0	32.0	22.0	12.0	10.0	8.5	4.0	-	-	74
AZK-X	5.0	29	41.0	36.0	26.0	13.7	11.0	9.3	6.6	4.6	2.7	2.0	91
AZK-P	3.7	32	40.0	35.0	25.2	17.7	10.9	8.0	5.6	4.2	1.5	1.0	88
AZK-L	5.0	85	68.0	62.0	42.0	26.0	20.6	16.2	9.0	7.2	7.2	5.0	90

Evacuation time(s/L) to reach different vacuum levels(-kPa)

Model	Air supply pressure bar	Air consumption NL/min	10	20	30	40	50	60	70	80	90	Max. vacuum level -kPa
AZK-S	6.0	26	0.01	0.19	0.50	1.02	1.72	2.60	3.88	-	-	74
AZK-X	5.0	29	0.02	0.14	0.47	0.96	1.56	2.50	3.87	6.00	-	91
AZK-P	3.7	32	0.05	0.30	0.71	1.26	1.95	2.97	4.49	6.95	-	88
AZK-L	5.0	85	0.06	0.16	0.33	0.60	0.95	1.43	2.14	3.03	6.16	90

Technical parameters - Pressure switch

Model	ZPDC-□	ZPDC-□-E
Pressure range	-100~100kPa	-100~100kPa
Setting pressure range	-105~105kPa	-105~105kPa
Proof pressure	500kPa	500kPa
General gas	Air,Non-corrosivenon flammable gas	Air,Non-corrosive,non flammable gas
Power supply voltage	24V DC±10%,RIPPLE(P-P)10%or less	24V Dc±10%,RIPPLE(P-P)10%or less
Current consumption	≤40mA(Without load)	≤40mA(Without load)
Switchoutput Output mode	2NPN or2PNPopen collectoroutput+1~5V linear analog output	1NPN or 1PNP open collector output
Max.load current	125mA	125mA
Max.supplyvoltage	30V DC(NPN)24V DC(PNP)	24V DC
Residualvoltage	≤1.5V	≤1.5V
Response time	≤2.5ms(chattering-proo funcion:25ms,100ms, 250ms,500ms,1000ms,1500ms selectable)	≤2.5ms(chattering-proof function:2.5ms,20ms, 100ms,500ms,1000ms,1999ms selectable)
Response time
Output short circuit protection	Yes	OUT switch:Yes;V-Sol/D-Sol:No
Repeatability	±0.2%F.S. ±1 digit
Display	3½LED7 segment display(Red)display(Sampling rate:5times/sec)
Indicator accuracy	±2%F.S. ±1 digit
Swtch ON indicator	OUT1:Green/OUT2:Red
Environmental resistance IP Grade	IP40
Ambient temp.range	Operation:0~50℃
Withstand voltage	1000VAC in 1minute(between case and lead wire)
Insulation resistance	50MΩ min. (at 500V DC,between case and lead wire)
Temperature characteristic	±2%F.S. (at temperature range of 0~50℃)
Lead wire	Oil proof PVC cable(0.15mm²)

Air circuit schematic diagram

Output circuit wiring diagrams

Centralized air supply dimensions(mm)

Dimensions(mm)

Installation diagram

Repair kits

Q: Could you offer the free samples ?

A: Yeah, but it depends products, Pls contact us ina@pneuhydr.com or whatsapp 0086 15168536055

Q: What ' s your business scope ?

A: Our business scope is service of exporter automation parts with full container, and sell air cylinder , air source treatment , solenoid valve , air valve, motorize valve , Brass valve, hydraulic valve, hydraulic cylinder, air and oil fitting, pressure gauge etc .

Q: What types of products you can make ?

A: We can make many kinds of stainless steel, brass ,aluminum materials processing .like high pressure Valve / solenoid valve / electric valve / water valve/pneumatic valve/air cylinder/hydraulic valve/hydraulic accumulator products and so on .

Q: Can the product be made with our logo and brand ?

A: Yes , of course , we can make . we are OEM supplier for years and professional to make . But you need give us the authorization if it is possible .

Q:Can you provide original famous pneumatic and hydraulic,instruments brand goods ?

A: Yes,We can supply like Festo,Smc,Ckd,Burket,Hydac,Rexroth,SMS,RSMT,Marsh ,Endress+Hauser etc.

Q: Is there a warranty available?

A: Yes, normally products is one year quality guarantee.

Q: Is the connector in British or Metric system? What is the difference between PT, NPT, and G threads?

A: The G thread is cylindrical and does not seal itself, requiring additional gaskets to prevent leakage. PT and NPT are conical, and the internal and external threads become tighter and tighter when tightened. Sealing is achieved through the deformation of the threads, and sealant or tape is usually used in conjunction to enhance the sealing effect

G-thread is a cylindrical straight pipe used for non sealed connections; PT thread is a conical tube that relies on the deformation and sealing of the thread itself; NPT is also a conical tube with a tooth profile angle of 60 degrees, mainly used in North America

Q: How to convert pressure units: MPa, bar, psi, kg/cm ²?

A: 1MPa=10bar≈145psi≈10kg

Q:What usually causes the burnout of solenoid valve coils?

A:Incorrect voltage and hz, frequent switching, pilot head entering liquid,valve core and spring problem,environment hot,heavy vibration etc.

Q: What should be noted for pneumatic components in high temperature or extremely cold environments?

Focus Point	High Temperature Environment Countermeasures	Extreme Cold Environment Countermeasures
Seals	Fluororubber, PTFE	Low-temperature nitrile, silicone rubber, polyurethane
Lubrication	High-temperature synthetic grease (low volatility)	Low-temperature grease (low pour point, low viscosity)
Air Supply Treatment	Strengthen cooling, efficient water removal	Ultra-low dew point drying (refrigeration + adsorption type), heat tracing
Metal Components	Reserve expansion clearance	Select materials with low-temperature toughness, prevent leakage due to cold shrinkage
Control Components	High heat-resistant grade coils, heat dissipation, low power consumption	Install insulation boxes, local heating, prevent cold condensation
Installation	Keep away from heat sources, add heat insulation plates	Avoid exposure to wind and snow, wrap with thermal insulation materials

Product Tags:


*From:	Your email address is incorrect!
*To:	Ningbo Sanmin Import And Export Co.,Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Pneumatic Solenoid Valve
Certification:	ISO9001
Price:	Negotiate
Payment Terms:	L/C,T/T
Max. vacuum level:	74 -kPa
pressure:	6.0bar
Max. vacuum flow:	44NL/min
Warranty:	1 Year
Brand Name:	NBSANMINSE
Model Number:	AZK-S
Place of Origin:	CHINA
MOQ:	10PCS
Supply Ability:	10000PCS
Delivery Time:	5-30days
Packaging Details:	Box
Specification:	S - Low vacuum level type
Air consumption:	26 NL/min