| Basic parameters |  | 
| Measuring medium | Liquid or gas (compatible with contact materials) | 
| Measuring range | -0.1~0~7MPa (see range selection table for details) | 
| pressure type | Gauge pressure, absolute pressure, negative pressure | 
| Medium temperature | -40~85℃ | 
| connection time | 20ms | 
| Stable performance | ±0.1% FS/year | 
| temperature drift | ±0.01%FS/℃ (within temperature compensation range) ±0.05%FS/℃
(outside temperature compensation range) | 
| Temperature compensation | -20~80℃ | 
| Explosion-proof type | Intrinsically safe Ex ia ⅡC T6 Ga (4~20mA output only) | 
| Protection level | IP65 Note: The above protection level refers to the level achieved after
the electrical connection is complete. | 
| Accuracy level | 0.1%FS, 0.25%FS | 
| response frequency | Analog signal output ≤30Hz Digital signal output ≤5Hz | 
| overall weight | ≈381g | 
| resolution | Analog output 0.01%FS, digital output 0.05%FS | 
| Output power supply |  | 
| output | 4~20mA, RS485, 0~10VDC, 0~5VDC, 1~5VDC | 
| powered by | 9~28VDC, 15~28VDC, 15~24VDC | 
| Maximum power |  | 
| output | 4~20mA, RS485, 0~10VDC, 0~5VDC, 1~5VDC | 
| power | ≤0.02Us(W), ≤0.015Us(W), ≤0.008Us( | 
| Load characteristics |  | 
| voltage type | ≥10kΩ | 
| Current type | Load≤{(Us-12)÷0.02}Ω (Us=supply voltage) | 
| environmental conditions |  | 
| ambient temperature | -40~85℃ | 
| environment humidity | 0%~95%RH (no condensation, no condensation) | 
| Overpressure and explosion |  | 
| overload pressure | 0.2MPa, 0.27MPa, 0.33MPa, 0.53MPa, 0.67MPa, 1.2MPa, 1.67MPa,
2.67MPa, 4MPa, 7MPa, 0.27MPa, 0.33MPa, 0.53MPa, 0.67MPa, 1.2M | 
| Burst pressure | 0.3MPa, 0.4MPa, 0.5MPa, 0.8MPa, 1MPa, 1.8MPa, 2.5MPa, 4MPa, 6MPa,
8MPa, 0.4MPa, 0.5MPa, 0.8MPa, 1MPa, 1.8MPa | 
| overall material |  | 
| Diaphragm | Ceramics (contact with measured medium) | 
| process connection | 304 stainless steel (contact with measured medium) | 
| shell | 304 stainless steel | 
| Core seal | See pressure and burst charts (contact with measured medium) | 
| ED circle | Fluorine rubber | 
| Hirschmann joint | ABS engineering plastics | 
| mechanical stability |  | 
| Anti-vibration performance | 10g(20…2000Hz) complies with IEC60068-2-6 standard | 
| Impact resistance | 500g/ms conforms to IEC60068-2-27 standard | 
| electrical protection |  | 
| Short circuit protection | permanent | 
| Reverse polarity protection | No damage, but doesn’t work | 
| Insulation resistance | ≥100MΩ 500VDC | 
| Dielectric strength | 500VAC | 
| Output limits |  | 
| Output minimum | 4mA, 0, 0.001VDC | 
| Output maximum | 20mA, 2000, 10VDC, 5VDC |