2 Zone Conventional Fire Alarm Panel Wall Mounted For Fire Fighting System

Conventional Fire Alarm Panel 2 Zone For Fire Fighting System

Introduction

The fire alarm control panels (2 Zone,4 Zones, 8 Zones, and 16 Zones) provide all of the sophisticated features required of a

leading edge conventional fire alarm system along with the simple operation and efficient installation methods

demanded by both installers and building users.

The panel can be flush or surface mounted and the generously sized metal back box allows ample space for rear or top

cable entries.

A comprehensive range of auxiliary devices is available to operate with the fire control panels including optical,

ionization, photoelectric, photoelectric-thermal and heat detectors.

Each of the system components has been specifically designed to operate as part of the system. This provides

assurance that the control panel, smoke detectors, interface devices and the ancillary components are all fully

compatible with one another and that the full range of system functionality is supported by each device.

This series of panels are basically the same in application and operation, their differences are shown in Table 1. PANEL

will be described as the example in the following sections.

Product Features

4,8,16 Class B Initiating Device Circuits (lDCs).
. All zones accept conventional detectors and any normally open contact device.
. Four Class B Notification Appliance Circuits (NACs).
. One Form-A Alarm Relay.
. One Form-A Fault Relay.
. One Form-A Supervisory Relay
. 3.0 amps ofsystem power.
. Max 30 conventional detectors in one zone.
. Auto/Manual mode setting enable.
. Each Zone can be disabled.
. Sound output can be disabled.
. Manual active sound output enabled.
. Able to report short and broken circuit
of detection zones.
. Designed with standby batteries and space provision for 1 sealed lead- acid batteries
Evacuate,Testing and disable functions.
. Remote reset and silence alarm functions
. Can conneet max 32 repeater panels by RS485 communication port
. Dimensions :14.57"(37 cm) long X 17.32"(44 cm) high X 3.94"(10cm)
. Weight: 6.6kg (without battery)

Specification

Primary AC	120VAC 50/60 Hz Power supply rating
	240VAC 50/60 Hz
Power supply rating	2 Amps @ 24VDC
Maximum Battery Charging Current	0.98 Amps @ 26VDC
Initiating Device Circuits 2 Zones	Alarm Zone 2
Normal Initiating Operating Voltage	23VDC, Maximum 26VDC, regulated
Normal Quiescent Current (normal status)	<50mA
Alarm Current (not include the others)	<150 mA
Short Circuit Initiating Current (per zone)	35mA Maximum
Maximum Initiating Resistance (per zone)	10 ohms
Initiating End-of-Line Resistor	4K7 ohms, 1/2W 5%
Standby Detector Current (per zone)	4mA maximum
Maximum Detector Count (per zone)	30 detectors
Initiating Cabling Type	18AWG Twisted Shielded pair (14 – 18 AWG)
Detector Base Impedance	430 ohms
Notification Appliance Circuits	1 NACs, Special Application
Maximum NAC Current Rating	1 Amp maximum per circuit
NAC Operating Voltage	26VDC Nominal, 30VDC Maximum
NAC End-of-line Resistor	1N4007 Diode
FAULT Relay rating	2A & 30VAC, resistive
Alarm( Auxiliary ) Relay rating	2A & 30VAC, resistive
Master alarm panel	Digital & LED display
Slave alarm panel	LED display only

Product range

Conventional Fire Alarm System
Addressable fire alarm system
Gas Extinguishing control system
Beam Detector
Standalone smoke detectors and combustable gas detector
4 wire smoke detectors with relay output.
2 wire Conventional smoke and heat detectors
Explosion-proof flame detector for fire alarm system



Service


1. OEM &ODM service.
2. Provide technical support and after-sale service.
3. 1 year warranty.
4. Normally 15 working days lead time.
5. Welcome sample order.

We sepecializes in design and manufacture of high quality fire protection solutions for commerical, industrial and domestic applications. we have nearly 20 years experience in the field of fire protection industry.Everlasting desire for innovation drives our company's product development progress.

We are continuously exploring new technologies that help us live in a smart world.

XHA adopts advanced technologies to lauch its smart series including"smart fire protection"."smart home safety".also XHA is certified by ISO9001, ISO14001 and ISO18001.Professional high knowledge in fire alarm detection system,which allowed our factory specialize in OEM/ODM products range of fire alarm systems include:

1. Intelligent addressable fire alarm system.

2. Conventional fire alarm system.

3. Gas extinguishant control system

4. Beam detector and flame detector

5. Smart home detector& Industry Alone stand detectors.

6. Electrical fire monitor system

7. Fire door monitor system

Our corporate philosophy is to provide high quality product,excellent service and reasonable prices.