PC120 PC200 PC210 PC270 Excavator Hydraulic Shears Strong For Steel Structure Demolition

PC120 PC200 PC210 PC270 Excavator Hydraulic Strong Shears For Steel Structure Demolition

Main Features:
1. The adoption of special slewing support provides stable perfomance.
2. The shear uses imported steel material,with double-layer wear -resisting protection,high strength amd long service life.
3. The strcution is optimized by design and hai large shear.

Selling point:
The cutting mouth adopts imported material, with wear-resisting welding wire, and the pattern design is more wear-resisting and beautiful.
The body adopts Q355B manganese plate design with high strength, light weight and good wear resistance.
Two times of paint, thickness 40-50min fine paint surface, rust proof.
The cylinder is thickened and lengthened for greater shear force.
CNC head boring process with high accuracy, high concentricity, more durable.
Its unique design and innovative way to ensure efficient operation and strong cutting force, powerful cylinder to strengthen the mouth closing force to shear hard concrete.
Suitable for demolition of all buildings, concrete crushing, root with steel sheet, conducive to steel shear, recycling.

PC120 PC200 PC210 PC270 Excavator Hydraulic Strong Shears For Steel Structure Demolition

Our Hydraulic Demolition Shears Product Parameter

Special notes on operation and use of demolition hydraulic shear:
Only reasonable and correct use of a good product can effectively improve work efficiency, but also ensure the service life of the product, so the following special notes must be read carefully before use:
1. Demolition shear cylinder shear pressure 250-320kg, motor rotary pressure 80-100kg, rotary flow per minute 25-35L, Excessive pressure
flow will cause damage to the motor and support gear (rotation speed shall not exceed 10r min)!!
2. Before the first use of the equipment must be filled with butter, ensure that each butter nozzle filling thoroughly, use again 1 times /4 hours. Before using the equipment, all the stop valves of the four small arm iron pipes must be opened to prevent one-way oil from damaging the motor.
3. Demolition shear can not rotate when cutting materials, easy to cause damage to the motor and slewing support.
4. All blades shall not be cut quenched material, alloy steel, recycled iron and rail, which can easily cause blade collapse. Bear in mind: the phenomenon of collapse of knife and blade occurs instantly in shear heat treatment.
5. It is forbidden to use demolition shear to hit steel and move, push and pull heavy objects.
6. Pay attention to regular maintenance and daily inspection. If oil pipe leakage and bolt looseness are found need to reinforce timely .Retract the cylinder when placing for a long time.
Good equipment depends on use and maintenance!

How to make maintance?

Product maintenance
1. Daily checkpoints
Whether there is any damage or deformation of the body, whether there is leakage of the hose connection,pin and bushing damage check and its replacement cycle, check the loosening state of bolts and nuts, check the oil level and loosening of the gear and tighten the loosening bolt.
2. Regular checkpoints
The seals and rotating parts of the hydraulic cylinder will wear out, and should be replaced in time after reaching the service life. Replacement parts should be matched with the original factory.
3. Check the tightening state of bolts and install new bolts. Check and ensure that the bolts tightened are not loose after 8 hours of use. The damaged bolts should be replaced in time. Bolts should be replaced after approximately 1500 hours or 12 months of use after installation.
4, in the process of use, it is recommended to check regularly whether there is oil leakage to ensure no fault, so as not to affect the normal use.
Every 4 hours : add lubriCATEEEEEEEEing oil, lubriCATEEEEEEEEion shaft pin and rotating gear 1 time.
Every half a year or 1000 hours (whichever comes first): replace the hydraulic cylinder oil seal and motor oil seal once. If the oil seal is not replaced within the specified period, there is a certain probability that other parts of the product will be damaged, for example, the cylinder will be strained.

Koko Shop Machine Co.,Ltd (Huilian Machinery) found in 2011, is a professional supplier who is specializd in construction machinery parts for excavator and attachments, including Hydraulic Hammer, Hydraulic Breaker Spare Parts, Quick Coupler, Hydraulic Grab, Ripper, Vibrator, etc. And, Excavator parts Engine, Hydraulic Pump, Swing motor, Travel motor, Main control Valve, Swivel Joint, Hydraulic seal kit. After 12 years developments, Huilian Machinery factory make quality parts with it's advance technology and advance machines. Hydraulic Breaker Parts suitable for: Atlas copco, Soosan, Furukawa, Atlas Copco, Alpha, Bretec, BTI, CATEEEEEE, CP, Daemo, DMB, Alicon, D&A, Doosan, EDT, Epiroc, Everdigm, Fine, Furukawa, General GB, Hammeroc HR, Hyundai HDB, Indeco HP MES, JCB, Kent, KCB, Komac, Komatsu JTHB, JKHB, Korota, Krupp, Kwanglim, Konan, Montabert, MSB, MTB, Noah, NPK, Okada, OKB, Omal, Poqutec, Powerking, Promove, Rammer, RB Hammer, RBI, Rhino, , Soosan, Stanley, Teisaku, T&H, Toku, Toyo, UBTECH, ECand so on. Hydraulic Excavator Parts suitable for: Komatsu, Hitachi, EC, Hyundai, Kobelco, Sumitomo, Kato, Doosan, JCB, cx, Sany, Liugong, XCMG, Xugong, Zoomlion, etc. OEM and ODM service offered.

In order to meet different customers' needs, Huilian Machinery also purchases Genuine Parts from German, Japan, Korea. And we established a long-term business relationship with customers from all over the world, like: U S A, Mexico, Saudi Arabia Kenya, Algeria, UAE, Russia, Morocco, etc. In 2023, Huilian Machinery became Distributors of easywork engineering machinery (SANY Group) in Russia and indonesia.

Koko Shop Machine is continuously seeking the chances to meet all the friends both from home and abroad for win-win cooperation.

And we believe that quality parts will take us to a further place. Let’s build a better tomorrow, together!

Introduction to Koko Shop Company

CertifiCATEEEEions

Enteprise Honor

Service Brand

Our Factory

Koko Shop Machine Management Department is an important control method for processing quality. It equipped with the most advanced inspection equipments The professional control devices,it can provide accurate reference data to choose the most suitable material and accessories, which also effectively control parts quality. Besides, it also provides digital information for engineers and quality controller to determine feasibility for spare parts after processing. This is the working processing of quality control.

Chooing steady quality supplier. After purchasing raw material, duing testing if it is proved well, then we will arrange these eligible matrial that come into warehouse.

When the spare parts finish and come into testing working conditon. Every worker will be responsible for their spare parts. They will give out fact testing date and results. After proving testing date is accord with delivery standard. Then Koko Shop Machine Quality Management Department will allow these spare parts that go to packing department and packing.

Before delivery, Koko Shop Machine Quality Management Department should check all mark and packing conditon. If it is prove it is accord with exporting standard and customer's requirement. Then they will allow these equipment come into fininshed product area. 

Of course Koko Shop Machine Quality Management Department have the right to make sample testing for every production step to make sure product quality.