The Most Professional, Classical 320x256 / 30μm MWIR MCT Cooled Infrared Detector

C330M MWIR MCT cooled infrared detector comes with 320X256 format at the pixel size of 30μm. It is interchangeable with most mainstream MARS like products when configured with RS058 integrated stirling cooler. It can be used for almost all possible applications like long range surveillance system, handheld thermal imagers, gas leakage detection cameras etc.

The dewar design, the cooler dimension, and the mechanical/electrical interface are almost the same so that the camera integrators only need to take out their old defective counterpart and connect our interchangeable C330M RS058 easily for further internal configuration.

- Resolution: 320x256

- Pixel Pitch: 30μm

- High Sensitivity

- Compact Design

- Lightweight

- Low Power Consumption

The C330M MWIR cryogenically cooled infrared detector is widely used many areas such as Remote Monitoring System, Flight Vision Enhancement System, Multi-sensor Payload etc.

1. How does uncooled focal plane array microbolometer work?

By using the principle of infrared radiant thermal effect, the uncooled infrared detector converts infrared radiation energy into heat energy with infrared absorption material, so that the temperature of the sensitive material increases. Then, a certain physical parameter of the sensitive material changes accordingly and converts into electrical signal or visible light signal through a certain conversion mechanism designed to realize the detection of the object.

2. What's the advantage of uncooled vox microbolometer?

Uncooled infrared focal plane detector does not need an Integrated Dewar Cooler Assembly (IDCA) device and can work at room temperature. It has the advantages of fast start, low power consumption, small size, light weight, long life, low cost and so on. Although the sensitivity of uncooled infrared focal plane detector is not as good as that of cooled infrared detectors, after years of development, its cost performance has been obviously better than the cooled detector, which has a broader application prospect.

COMPANY INTRODUCTION

Global Sensor Technology is the world leading infrared detector manufacturer and service provider with more than 10 years of industrial experience. It is willing to provide customers all over the world with high performance cooled uncooled thermal imaging detectors, infrared camera modules and share its professional application experience.

COMPANY PROFILE

COMPANY COMPETENCE

EXHIBITIONS

HORNORS & CERTIFICATES