30m/Min Plc Door Frame Forming Machine For Building Materials Supermarket

30m/min anti-theft door frame forming machine for building materials supermarket

What is the anti-theft door frame forming machine

The anti-theft door frame model machine is a complete process of uncoiling, leveling, punching, roll forming, and fixed-length shearing with steel strip as the raw material. The whole process does not require manual operation, only the PLC control system is required. Complete the production of anti-theft door frames.

How to distinguish the low, medium and high configuration of the anti-theft door frame forming machine

1. "Low profile" anti-theft door forming machine's uncoiling system The anti-theft door forming machine's uncoiling system mainly plays a role in helping uncoiling. However, there are often cases where the material roll falls off and the steel belt cannot be braked.

The uncoiling system of the "medium configuration" anti-theft door forming machine is equipped with damping brakes and baffles to ensure that the raw material will not be dragged off.

The uncoiling system of the "high configuration" anti-theft door forming machine will be equipped with a servo device on the basis of the middle configuration to ensure that the uncoiling speed is consistent with the forming speed.

2. The transmission system of the "low profile" anti-theft door forming machine uses chain transmission to ensure the power of the transmission. However, it will be a little difficult to produce thicker raw materials.

The transmission system of the "medium configuration" anti-theft door forming machine generally adopts bevel gear transmission of special materials, which can ensure a high transmission ratio, and the thickness of the production profile will also be limited.

The transmission system of the "high configuration" anti-theft door molding machine is driven by a reducer, which can cope with various thicknesses of raw materials, and the speed has also been further improved.

Liming Stamping Form Machine Co., Ltd. was established in 1995. After 27 years of unremitting efforts, it has been developed from the state-owned old factory with 8 employees to the current group with 360 employees and the overall solution provider for industrial chain customers with various roll forming machines.

Currently, Liming has 4 production plants and one Headquarters R&D and Design Center. The four factories have a total area of 55,000 square meters. Liming has developed from a single roll forming machine manufacturer into the "National Building Material Equipment R&D Center", "Steel House Design and Installation Company", "Metal Cold Bent Profile Entrusted Processing Company", and has become the overall solution provider for the metal construction industry, metal decoration industry, solar photovoltaic industry, rolling door industry, metal fence post, agriculture planting industry ... with 36 kinds of cold-formed metal profiles and products.

Our designers are world-class, and go to the first-class machinery factories in Finland, Germany and France to learn the advanced manufacturing technology and services from European factories every year, so as to improve ourselves and help customers to obtain European machinery and service with minimal project investment.

It's as simple as you provide only one picture, we are capable of making a complete set of 3D drawings, profile use scenarios, workshop site planning and VR composition of roll forming machine. You can 100% realize the mechanical drawings and configurations before ordering.

It solves the problems of cheat by those companies that deceive you with low prices and low quality, and avoids different goods ordered and delivered. You should get the clear mechanical display for your equipment when purchasing.

Please believe us due to our development history with constant efforts, reject the low-quality competitive small factories and trade companies that change industries at any time with our technology and strength. Please give us a chance to show you every aspect of our group.