30mil RF-45 PCB High Frequency PCB with Blue Solder Mask Coating Immersion Silver on Pads

30mil RF-45 High Frequency PCB with Blue Solder Mask Coating Immersion Silver on Pads
(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)

Brief Introduction
This type of immersion silver RF PCB is made on one of Taconic’s ORCER family material: RF-45. The circuit board is dual layers with finished 1oz copper. Solder mask and silkscreen overlay are on top layer only. The bottom layer is fully exposed covered with immersion silver as the shield function. It’s 0.8mm thick and 50 boards are vacuum packed for shipment.

PCB Specifications

Other Available RF PCB Material
FR-4 Tg>135, High Tg>170 FR-4 ( S1000-2M, TU-872 SLK, TU-768, IT-180A etc.)
Rogers RO4350B, RO4003C, RO4730G3, RO4360G2, RO4533, RO4534, RO4535, RO3003, RO3035, RO3006, RO3010, RO3210, RO3203, etc.
Rogers RT/duroid 5880, RT/duroid 5870, RT/duroid 6002, RT/duroid 6010, RT/duroid 6035HTC etc.
Rogers TMM4, TMM10, TMM13i, Kappa 438 etc.
PTFE F4B DK2.2, DK2.65
Taconic TLX-0, TLX-9, TLX-8, TLX-7, TLX-6, TLY-5, TLY-3, RF-10, RF-35TC, TLF-35, RF-60A, RF-45, TRF-45 etc.
AD450, AD600, AD1000, TC350 etc.
Metal core PCB, 1W/MK-3W/MK material
Flexible PCB
Megtron 6 (M6) R-5775G

Our PCB Services
PCB prototypes
Mass volume production
Single sided PCB
Double sided PCB
Multilayer PCB up to 32 layers
Heavy copper PCB
Hybrid PCB
Impedance controlled PCB
Via in pad PCB
Ball grid array (BGA) PCB
Blind via PCB
Countersink holes, half hole, press-fit hole
Quick turn-around (QTA) Delivery
No Minimum Order Quantity (MOQ)
Door to Door shipment service

CAPABILITY
2500-3000 types each month.

SERVICE AREA
North America, Oceania, Southeast Asia, Eastern Europe, Africa, Latin America, Western & Southern Europe, Northern Europe, Central & South Asian, Middle East.


Typical Applications:
Satellite Radio
RFID Tags
Satellite Radio Antennas
RFID Antennas
GPS Antennas

Manufacturing Process of Dual Layer PTH PCB

The immersion gold and HASL PCB are proceeding as following steps: (1). Material Shearing --> (2). Drilling --> (3). PTH --> (4). Dry Film (Circuit) --> (5). Pattern Plating --> (6). Etching --> (7). Solder Mask --> (8). Silkscreen --> (9). Surface Finish --> (10). Profile Contour --> (11). V-groove --> (12). Electrical Test --> (13). Packaging -->(14). Delivery



We can provide you with prototypes, small batches and mass production. Any enquiry, please feel free to contact us.