WAYJUN 3000V isolation two wire 4-20mA loop powered RTD temperature signal transmitter DIN35 signal converter

Features:
>> Input: Pt100 (-200 ~ +600 deg.C) (scope optional)
Also can choose Pt1000/Cu50/Pt10/Cu100
>> Output: two-wire 4-20mA signal
>> Accuracy: 0.2 (FSR%)
>> Containing linear and long-term compensation
>> 4-20mA loop powered,no need power supply
>> Input/output Isolation voltage: 3000VDC (1mA, 60S)
>> Two isolation: input/output
>> Installation: DIN35 rail mounted
>> Industrial temperature range: - 40 ~ + 85 deg.C
>> Size: 79.0x69.5x25.0mm
Product description:
WAYJUN two wires 4-20mA temperature transmitters are widely used in Pt100/PT1000/PT10/Cu50/Cu100 temperature sensor isolated and transmit, in industry mainly used for measuring the temperature of -200 ~ +600 Deg.C. The transmitter has linear and long-term compensation, the factory in accordance with national standard Pt100 indexing table calibration, fully meets 0.2accuracy. Input, output, and auxiliary power supply is completely isolated (three isolation), can withstand 2500VDC isolation voltage. Products using international standards for rail mounting DIN35, small size, high precision, stable performance, cost-effective, can be widely used in petroleum, chemical, power, instrumentation and industrial control industries.
Product Listing:
WJ11- G/F - Z□ - T□

						Signal Isolators & Conditioners
General parameters:
>> Accuracy		-------0.2% (relative to temperature)
>> Input -------		three- wire, four-wire or two-wire RTD signal, you can choose Pt100, Pt1000, Pt10, Cu50, Cu100 thermal
resistance.(Need to select a temperature range and a output signal)
>> Output -------		twowires 4-20mA current signal
>> Loop voltage----------		wide loop powered voltage range		isolation:12~30VDC
				Non-isolation:9~36VDC
>> Response time -------		≤ 100mS
>> Auxiliary power -------		no need,4-20mA loop powered
>> Power -------
>> Temperature drift -------		50ppm / ℃ (typical)
>> Isolation -------		input /output (if isolation)
>> Isolation voltage -------		3000VDC, 1 minute, leakage current (1mA)
>> Impact resistance voltage			------- 3KV, 1.2/50us (peak value)
>> Operating Temperature --------			-40 to +85℃
>> Storage Temperature --------			-40 ~ +85℃
>> Operating-------Humidity			10 ~ 90% (no condensation)
>> Storage Humidity -------		10 ~ 95% (no condensation)
Products Connecting Diagram:
Pin			Function		Pin			Function
1			No PIN		7		A	RTD signal Input A
2			No PIN		8		B	RTD signal Input B
3			No PIN		9		B	RTD signal Input B
4			Loop current power +		10		NC	No PIN
5			Loop current output signal -		11		NC	No PIN
6			No PIN		12		NC	No PIN

more details,please check: http://www.wayjun.net/index.php?main_page=product_info&cPath=2&products_id=75

   Shenzhen WAYJUN Industrial Automation is a HI-tech company of designing, researching 4-20mA/0-5V to RS485 Data Acquisition Module,analog signal isolated converter / conditioners,Ethernet I/O Module,PT100 temperature /speed/frequency signal isolators/splitter,isolated amplifier,Digital Signal to RS485/232 Module,Min-power DC DC converters.Our products also carry the CE approval for safety.

WAYJUN's products are widely used in the industry power fields of control, electric power, electronic instrument, medical electronic, rail transit, communication, telecom, automation,Medical and Test & Measurement etc.Our products are sold all over the world.Create maximum value for customers is our constant aim.More details,please check: www dot wayjun dot net.

WAYJUN products series:
1. Remote I/O isolation module
WJ21 series -------- 4-20mA/0-10V to RS485/232 AD converter
WJ31 series -------- RS485/232 to 4-20mA/0-10V DA converter
WJ28 series -------- 8 channels 4-20mA/0-10V to RS485/232 AD converter
WJ70 series -------- 4-ch DI 4-ch relay output, RS485/232 remote data acquisition module
WJ61 series --------16-ch DI switch / dry contact signal to RS485/232
WJ62 series -------- 8-ch DI switch signal to RS485/232 remote I/O modules
WJ60 series -------- 8-ch DI 8-ch DO switch to RS485/232 remote I/O modules

2. Analog signal isolator / transmitter:
DIN35 rail-mounted
DIN11 IAP-V (A) -P-V (A) ---- photoelectric isolation signal transmitter (one in one out)
DIN12 IAP-V (A) -P-V (A) ----- voltage / current signal splitter (one in two out)
DIN14 IAP-V (A) -P-V (A) ----- voltage / current signal splitter (one in four out)
DIN22 IAP-V (A) -P-V (A) ----- voltage/current signal isolated transmitter(two in two out)
DIN44 IAP-V (A) -P-V (A) ------ voltage/current signal isolated transmitter(four in four out)
WJ11 IAP-Z-T-P-A (V) ----------- PT100 thermal resistance temperature signal isolation transmitter
DIN22 IAP-Z-T-P-A (V) ----------- PT100 thermal resistance temperature signal isolation transmitter (two out of two)
DIN12 IAP-Z-T-P-A (V) ----------- PT100 thermal resistance temperature signal isolation splitter (one in two out)
DIN11 IAP-F-P-V (A)-----------frequency to voltage / current signal isolated transmitter
DIN11 IAP-V (A) -P-F----------voltage / current signal frequency isolation transmitter
DIN11 IAP-R-P-V (A) --------- Potentiometer /resistance signal isolated transmitter
DIN11 IAP-S-P-O-----------speed sensor signal isolated transmitter, sine waveshaping
DIN33 IAP-S-P-O------------------- encoder differential signal to pulse signal transmitter
DIN11D IAP-V (A) -P-V (A) -------- large current output signal isolator
DIN11 IAP 4-20mA------------------4-20mA passive signal isolator
DIN22 IAP 4-20mA------------------4-20mA passive signal isolator (two in two out)
DIN11 IAP 100LF-------------------- passive isolation 4-20mA signal distributor
DIN11 IAP 100LP-------------------- passive isolation 4-20mA signal conditioner
In addition, DC voltage / current signal isolators also have PCB package.