Product Details
Company Profile

4.3 Inch Custom Display Solutions 800x480 Resistive Touch Panel

4.3 Inch TFT LCD Display/Resistive Touch Panel/800x480 Dots/TFT-H043A12SVILT4R40

Product parameters

Display Size - 4.3"
Product Application - Instrumentation
Perspective - Full Perspective
Backlight type or brightness - 400cd/m2
Connection method PIN number - FPC-40PIN
Interface - MCU 8/16 Bit
Operating temperature - (-20~70℃)
Supply Voltage - 3.3V
Driver IC Model - ST7262

General Feature:

Item	Standard Value	Unit
Display Size	4.3	Inch
Number of Pixels	800(H)3(RGB) 480(V)	dots
Active Area	95.040(H)* 53.856(V)	mm
Outline Dimension	105.42(H) * 67.07(V) * 4.20(D) <TFT+RTP>	mm
Viewing Direction	Full O'clock	-
TFT Interface	MCU 8 bit/SPI/I2C	-
TFT Driver IC	ST7262+HT7381	-
TFT Driver Condition	VCI=3.3V(Typ)	V
Backlight-1	White LED/10 PCS/5 LEDs in series, 2 in parallel	-
Touch Panel	With RTP	-
CTP Driver IC		-
CTP Driver Condition	VDD=3.3V(Typ)	V
Operation Temperature	-30 ～ 80	℃
Storage Temperature	-30 ～ 85	℃

TFT Pin Description

Pin NO.	Symbol	Description
1～2	LEDK	LED Cathode
3～4	LEDA	LED Anode
5～6	GND	Ground
7～8	VCI	Digital Power
9～11	PSM[2～0]	MCU interface settings.
12	RESX	Reset input signal When RESX = 0 and maintain the length of 256 clock cycles, chip will generate a reset action.
13	CS	Chip select signal. If the MCU interface is set to the serial mode, this pin can be set to GPIB [0], internal pull-up resistor.
14	RD	Read control signals. In parallel mode of 8080, this pin is RD# signal, RD#=0, which means MCU reads data or status read cycle to the chip. In the 6800 parallel mode, this pin is the EN signal, EN=1, indicating that the MCU's control of the chip is in the enable cycle. If the MCU interface is set to serial mode, this pin can be set to GPIB[1] with an internal pull-up resistor.
15	WR	write control signal In 8080 parallel port mode, this pin is the WR# signal, WR# = 0, representing the MCU A command write or data write cycle is performed on the chip. In 6800 parallel port mode, this pin is RW# signal, RW# = 1, representing MCU Data read or status read cycle is performed on the chip. RW# = 0, representing The MCU performs a command write or data write cycle to the chip. If the MCU interface is set to serial mode, this pin can be set to GPIB[2],There are internal pull-up resistors.
16	RS/A0	command or data select signal A0 = 0, which means that the MCU reads the status of the chip or the command write cycle. A0 = 1, which means the MCU reads or writes data to the chip.

17	WAIT	waiting for output signal When the MCU reads and writes the chip, if the chip is busy, it turns WAIT into a low level to notify the MCU to enter the waiting period.
18～25	DB[0～7]	MCU data bus If set to serial port mode, these data buses will be used as serial port signals. Please refer to Table 3-2 "MCU serial port signal" description.
26～33	NC	Not Connect
34	INT	Interrupt output signal When the set interrupt condition occurs, this pin becomes a low level, which is used to generate an interrupt output to inform the MCU.
35	NC	Not Connect
36	GND	Ground
37	RTP_XR	Resistive TP function pin,If not used, let this pin open.
38	RTP_YD	Resistive TP function pin,If not used, let this pin open.
39	RTP_XL	Resistive TP function pin,If not used, let this pin open.
40	RTP_YU	Resistive TP function pin,If not used, let this pin open.

Search keyword: tft 4.3, tft 4.3", 4.3 tft lcd, 4.3" tft lcd, 4.3 inch tft lcd, tft lcd 4.3, 4.3 tft display, 4.3" tft display, 4.3 inch tft display, tft display 4.3, tft display 4.3"

TFT-H043A12SVILT4R40.pdf

Product Tags:

4.3 Inch Custom Display Solutions

Resistive Custom Display Solutions

800x480 Resistive Touch Panel

4.3 Inch Custom Display Solutions 800x480 Resistive Touch Panel

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Hotdisplay Technology Co.Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Custom Display Solutions
Brand Name:	HOTHMI
Model Number:	TFT-H043A12SVILT4R40
Place of Origin:	dongguan,China
MOQ:	2
Payment Terms:	L/C, D/A, T/T, D/P, Western Union, MoneyGram
Supply Ability:	99999
Delivery Time:	25 days
Product Type:	TFT Landscape
Display Content:	800x480
Dimensions (mm):	105.5x67.2x2.95
Viewport Window Size:	4.3"
Effective size (mm):	95.040x53.856
Special Instructions:	with RTP

4.3 Inch Custom Display Solutions 800x480 Resistive Touch Panel

4.3 Inch Custom Display Solutions 800x480 Resistive Touch Panel

4.3 Inch Custom Display Solutions 800x480 Resistive Touch Panel

Search keyword: tft 4.3, tft 4.3", 4.3 tft lcd, 4.3" tft lcd, 4.3 inch tft lcd, tft lcd 4.3, 4.3 tft display, 4.3" tft display, 4.3 inch tft display, tft display 4.3, tft display 4.3"

4.3 Inch Custom Display Solutions

Resistive Custom Display Solutions

800x480 Resistive Touch Panel

4.3 Inch Custom Display Solutions 800x480 Resistive Touch Panel

A reliable LCD display manufacturer, designer and supplier, HOTDISPLAY Technology Co.Ltd has been serving many industries since 2004. We manufacture LCD modules including monochrome TN STN FSTN LCM, COG LCD, TFT LCD display, TFT color LCD, graphic LCD module and character LCD displays.